BOOTLOADER-500-V01.11 release note
Date: 2014/05/13
[Modified]
1.change bootp size from c00000 to 1400000 as load default environment setting.

==========================================
BOOTLOADER-500-V01.10 release note
Date: 2013/11/1
[Modified]
1.Something wrong with data accessing on V1.09. Andrew fixed it

==========================================
BOOTLOADER-500-V01.09 release note
Date: 2013/10/29
[Modified]
1.Some camera calibration data will write to error address.

==========================================
BOOTLOADER-500-V01.08 release note
Date: 2013/09/11
[Modified]
1.Export some functions for ISP calibration

==========================================
BOOTLOADER-500-V01.07 release note
Date: 2013/05/28
[Modified]
1.Enter "qwe" within 3 seconds to enter bootloader mode


==========================================
BOOTLOADER-500-V01.05 release note
Date: 2012/09/17
[Modified]
1.Blink power led after DHCP retry count over 5 times

================================
BOOTLOADER-500-V01.04 release note
Date: 2012/06/26
[Modified]
1.update cmd_vcap.c
2.Set variable "bootdelay" to 1
================================

BOOTLOADER-500-V01.03 release note 
Date: 2012/06/20
[Modified]
1.change the networking configuration for PCBA test.  (set serverip to 192.168.0.5)
2.Set the variable "autoload" to "n"
================================


BOOTLOADER-500-V01.02 release note 
Date: 2012/06/19
[Bug Fixed]
1.Change the variable "serverip" from "192.168.5.123" to "192.168.123.5"
2.Add variable "gatewayip" in enviroment partition . 
================================
BOOTLOADER-500-V01.01 release note 
Date: 2012/06/13
[New Feature]
1.Support PCBA test mode


[Modified]
1.Update baud rate to 115200
2.merge a1_bsp-1.00.10
  revision 3933,4125	
===================================
BOOTLOADER-500-V01.00 release note 
Date: 2012/05/24
[New Feature]
1.Support PingPong mechanism 
