A1D-500-V6.07.24
2014/08/06

Bootloader: BOOTLOADER-500-V01.11
A1 SDK: 2.00.46
dev_cap version: V1.2.48
ISP module version: 1.01.88 and A1_ISP: 1.01.88.30
ECM version: v1.0.0.73
Web UI:  V1.01.96
LibHttp: V1.02.06
OpenSSL V1.00.08
LibRtsp V1.00.46
Wan Daemon V1.00.25
Wan Daemon_api V1.00.10
DateTime Daemon V1.00.12
Gsoap library: V6.02.14
UPnP library: V1.00.06
LibLog library: V1.00.06

[New Features]
	
[Modified]

[Bug Fixed]

	1. fixed the issue of installing ActiveX failed in OEM brand (Inaxsys).
		
[Limitation]
	1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
	2. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and
	   cause the network to some errors occurred. This case only occurs the the D/N models.
	3. When OSG function is activated, the snapshot always captured image data from channel 1.
	4. FPS number of model I91/I92/I93/I94/I95/I96 is about 27 when the resolution is 1080p.
	5. On the High frame rate mode, the shutter speed might be the 1/100 sec in the 50Hz power line frequency environment. 
	   The image sensor outputs 60 FPS not 50 FPS.
	6. using the audio token with the client PC. the MIC-in can't plug out when active, that may cause the IE crash.
	7. When client PC using IE and receive the audio track of G711 u-law or a-lat. 
	   the interval noise "da", "da"... may happen when the active-X play out this audio stream.(MS-filter)
	8. Test Dynamic GOP & Frame rate result exceed Spec ? range [20719].
	9. When executing "pan action",it suddenly occurs distortion at first.[21050]
	10. The frame_num in slice_header of 1fps streaming (Only I frame), will be 0 For QuickTime & will be 1 For NVR. 
	    For supporting both QuickTime & NVR, FW set frame_num to be 0, 1, 0, 1, 0, 1, 0, 1, 0, 1. [21733]
	11. QuickTime doesn't support resolution 3648x2736. [RDQ 136] 
########################################################################
A1D-500-V6.07.23
2014/07/15 

Bootloader: BOOTLOADER-500-V01.11
A1 SDK: 2.00.46
dev_cap version: V1.2.48
ISP module version: 1.01.88 and A1_ISP: 1.01.88.30
ECM version: v1.0.0.73
Web UI:  V1.01.96
LibHttp: V1.02.06
OpenSSL V1.00.08
LibRtsp V1.00.46
Wan Daemon V1.00.25
Wan Daemon_api V1.00.10
DateTime Daemon V1.00.12
Gsoap library: V6.02.14
UPnP library: V1.00.06
LibLog library: V1.00.06

[New Features]
	
[Modified]

[Bug Fixed]

	1. #25348		File management3video exportPC,ArchivePlayerŪ쪺׬15 (videoɮצW٤]T)
	2. #25264		[reopen] E23A File managementĿ MD, WXvɶ]ܬ
	3. #25351		unmount SD, UIX{Fail to unmount storage media
	4. #25352		Lroot account,ݤfile managementsnapshot
	5.  Back to previous page, and expore file failed with 1st frame
	6.  Lroot account,Lkexport video
	7. #25349		stroragev[Wenable motion,|yey۷Y,åB|_u{H
	8.  Back to previous page or forward to next page, get_frames without utctime
	9. 
		
[Limitation]
	1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
	2. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and
	   cause the network to some errors occurred. This case only occurs the the D/N models.
	3. When OSG function is activated, the snapshot always captured image data from channel 1.
	4. FPS number of model I91/I92/I93/I94/I95/I96 is about 27 when the resolution is 1080p.
	5. On the High frame rate mode, the shutter speed might be the 1/100 sec in the 50Hz power line frequency environment. 
	   The image sensor outputs 60 FPS not 50 FPS.
	6. using the audio token with the client PC. the MIC-in can't plug out when active, that may cause the IE crash.
	7. When client PC using IE and receive the audio track of G711 u-law or a-lat. 
	   the interval noise "da", "da"... may happen when the active-X play out this audio stream.(MS-filter)
	8. Test Dynamic GOP & Frame rate result exceed Spec ? range [20719].
	9. When executing "pan action",it suddenly occurs distortion at first.[21050]
	10. The frame_num in slice_header of 1fps streaming (Only I frame), will be 0 For QuickTime & will be 1 For NVR. 
	    For supporting both QuickTime & NVR, FW set frame_num to be 0, 1, 0, 1, 0, 1, 0, 1, 0, 1. [21733]
	11. QuickTime doesn't support resolution 3648x2736. [RDQ 136] 
########################################################################
A1D-500-V6.07.22
2014/07/10

Bootloader: BOOTLOADER-500-V01.11
A1 SDK: 2.00.46
dev_cap version: V1.2.48
ISP module version: 1.01.88 and A1_ISP: 1.01.88.30
ECM version: v1.0.0.72
Web UI:  V1.01.92
LibHttp: V1.02.06
OpenSSL V1.00.08
LibRtsp V1.00.46
Wan Daemon V1.00.25
Wan Daemon_api V1.00.10
DateTime Daemon V1.00.12
Gsoap library: V6.02.14
UPnP library: V1.00.06
LibLog library: V1.00.06

[New Features]
	
[Modified]
	1.  Update Onvif for change "tns1:Device/IO/VirtualPort\ " to "tns1:Device/IO/VirtualPort"
	
	2.  Mdify HttpLibrary for connecting crash by client.
	
	

[Bug Fixed]
	1. #25258		Archive player can't play the downloaded raw file
	2. #25263		E31 }default eOϪ
	3. #25264		E23A File managementĿ MD, WXvɶ]ܬ
	4. #25267		E23A file managementݤ줧ev,]|ɶ,Iget current time~_
	6. #25269		]wmanual time(2014/7/7 15:30 ,time zone +8), file managementɶ|8p
	7. #25273		Bullet camera doesn't support PT scanner
	8. #25167		[Suggestion] Hide "Talk to camera" icon on Safari/ Chrome/ Firefox browser
	9. Fixed the bug of miniature fisheye view status can not close after Save&Reboot. (CHD)
	10. Modify Upnp library for fixing the bug of showing ACTi in packet which is discovering by clicent.
 
	11. (#25151) Queryls get one record with end time earlier than start time (change date time to yesterday)
	12. Change Date Time caused filemanagement UI bar gray out all the records which no frames there 
	13. Export Video with "Recoreding is removed" will cause UI crash
	14. Export Video in hour duration but can not get frames because the first second has no frame

	 
[Limitation]
	1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
	2. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and
	   cause the network to some errors occurred. This case only occurs the the D/N models.
	3. When OSG function is activated, the snapshot always captured image data from channel 1.
	4. FPS number of model I91/I92/I93/I94/I95/I96 is about 27 when the resolution is 1080p.
	5. On the High frame rate mode, the shutter speed might be the 1/100 sec in the 50Hz power line frequency environment. 
	   The image sensor outputs 60 FPS not 50 FPS.
	6. using the audio token with the client PC. the MIC-in can't plug out when active, that may cause the IE crash.
	7. When client PC using IE and receive the audio track of G711 u-law or a-lat. 
	   the interval noise "da", "da"... may happen when the active-X play out this audio stream.(MS-filter)
	8. Test Dynamic GOP & Frame rate result exceed Spec ? range [20719].
	9. When executing "pan action",it suddenly occurs distortion at first.[21050]
	10. The frame_num in slice_header of 1fps streaming (Only I frame), will be 0 For QuickTime & will be 1 For NVR. 
	    For supporting both QuickTime & NVR, FW set frame_num to be 0, 1, 0, 1, 0, 1, 0, 1, 0, 1. [21733]
	11. QuickTime doesn't support resolution 3648x2736. [RDQ 136] 

########################################################################
A1D-500-V6.07.21
2014/07/04

Bootloader: BOOTLOADER-500-V01.11
A1 SDK: 2.00.46
dev_cap version: V1.2.47
ISP module version: 1.01.88 and A1_ISP: 1.01.88.30
ECM version: v1.0.0.72
Web UI:  V1.01.91
LibHttp: V1.02.05
OpenSSL V1.00.08
LibRtsp V1.00.46
Wan Daemon V1.00.25
Wan Daemon_api V1.00.10
DateTime Daemon V1.00.12
Gsoap library: V6.02.13
UPnP library: V1.00.05
LibLog library: V1.00.06

[New Features]
	
[Modified]
	1.     Add "GetStreamBoundary" at the end of the multipart packet when sending Get_RECORDING cmd to get video.
	

[Bug Fixed]
	1. Fixed Onvif bugs of Event trigger crash.
                     
[Limitation]
	1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
	2. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and
	   cause the network to some errors occurred. This case only occurs the the D/N models.
	3. When OSG function is activated, the snapshot always captured image data from channel 1.
	4. FPS number of model I91/I92/I93/I94/I95/I96 is about 27 when the resolution is 1080p.
	5. On the High frame rate mode, the shutter speed might be the 1/100 sec in the 50Hz power line frequency environment. 
	   The image sensor outputs 60 FPS not 50 FPS.
	6. using the audio token with the client PC. the MIC-in can't plug out when active, that may cause the IE crash.
	7. When client PC using IE and receive the audio track of G711 u-law or a-lat. 
	   the interval noise "da", "da"... may happen when the active-X play out this audio stream.(MS-filter)
	8. Test Dynamic GOP & Frame rate result exceed Spec ? range [20719].
	9. When executing "pan action",it suddenly occurs distortion at first.[21050]
	10. The frame_num in slice_header of 1fps streaming (Only I frame), will be 0 For QuickTime & will be 1 For NVR. 
	    For supporting both QuickTime & NVR, FW set frame_num to be 0, 1, 0, 1, 0, 1, 0, 1, 0, 1. [21733]
	11. QuickTime doesn't support resolution 3648x2736. [RDQ 136] 

########################################################################
A1D-500-V6.07.20

2014/07/01


Bootloader: BOOTLOADER-500-V01.11
A1 SDK: 2.00.46
dev_cap version: V1.2.46
ISP module version: 1.01.88 and A1_ISP: 1.01.88.30
ECM version: v1.0.0.72
Web UI:  V1.01.91
LibHttp: V1.02.05
OpenSSL V1.00.08
LibRtsp V1.00.46
Wan Daemon V1.00.25
Wan Daemon_api V1.00.10
DateTime Daemon V1.00.12
Gsoap library: V6.02.12
UPnP library: V1.00.05
LibLog library: V1.00.06

[New Features]
	
[Modified]
	1.      Enable motion detection function to default.
	2.      EPTZ mode only support SONY/VISCA protocol on the high-end fisheye cameras. (AC firmware support ACTI/ACTI, NB firmware support SONY/VISCA)
	3.      Support Third party software licenses. (LevelOne)
	4.      Modify response of ProbeMatch: Company Name, Camera Model, and Uri

[Bug Fixed]
	1. #25100		Fail to set Port mapping, pop error msg "Error. Invalid settings"
	2. #25114		I71, Apply a home position then go to other position, disable miniature fisheye view window will cause DUT-A back to home position.
	3. #25124		B54]wEvent(Change Motion Detection Profile), Save RebootMotion|
	4. #25125		LHTTP port, File Management|Lkϥ
	5. #25136		[DVT] E23A unmount SD card ɷ|
	6. #25137		[DVT] Save Reboot,ɶ8p,Factory Default Camera,s},ɶ|A8p
	7. Onvif bug - if input digit 1~32 to be Preset Point token will fail to GotoPreset through Onvif Device Management.
                     
[Limitation]
	1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
	2. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and
	   cause the network to some errors occurred. This case only occurs the the D/N models.
	3. When OSG function is activated, the snapshot always captured image data from channel 1.
	4. FPS number of model I91/I92/I93/I94/I95/I96 is about 27 when the resolution is 1080p.
	5. On the High frame rate mode, the shutter speed might be the 1/100 sec in the 50Hz power line frequency environment. 
	   The image sensor outputs 60 FPS not 50 FPS.
	6. using the audio token with the client PC. the MIC-in can't plug out when active, that may cause the IE crash.
	7. When client PC using IE and receive the audio track of G711 u-law or a-lat. 
	   the interval noise "da", "da"... may happen when the active-X play out this audio stream.(MS-filter)
	8. Test Dynamic GOP & Frame rate result exceed Spec ? range [20719].
	9. When executing "pan action",it suddenly occurs distortion at first.[21050]
	10. The frame_num in slice_header of 1fps streaming (Only I frame), will be 0 For QuickTime & will be 1 For NVR. 
	    For supporting both QuickTime & NVR, FW set frame_num to be 0, 1, 0, 1, 0, 1, 0, 1, 0, 1. [21733]
	11. QuickTime doesn't support resolution 3648x2736. [RDQ 136] 

########################################################################
A1D-500-V6.07.19
2014/06/18

Bootloader: BOOTLOADER-500-V01.11
A1 SDK: 2.00.46
dev_cap version: V1.2.44
ISP module version: 1.01.83 and A1_ISP: 1.01.83.29
ECM version: v1.0.0.72
Web UI:  V1.01.86
LibHttp: V1.02.05
OpenSSL V1.00.08
LibRtsp V1.00.46
Wan Daemon V1.00.25
Wan Daemon_api V1.00.10
DateTime Daemon V1.00.12
Gsoap library: V6.02.10
UPnP library: V1.00.05
LibLog library: V1.00.06

[New Features]
	1. Add 800x600 video resolution for all models.
	2. Onvif Add Relative Move Function.
	
[Modified]
	1. #24998 B44 IRIS change to F80 then save & reboot=> Can't  keep it back to F20
	2. Add Level One Customization.

[Bug Fixed]

[Limitation]
	1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
	2. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and
	   cause the network to some errors occurred. This case only occurs the the D/N models.
	3. When OSG function is activated, the snapshot always captured image data from channel 1.
	4. FPS number of model I91/I92/I93/I94/I95/I96 is about 27 when the resolution is 1080p.
	5. On the High frame rate mode, the shutter speed might be the 1/100 sec in the 50Hz power line frequency environment. 
	   The image sensor outputs 60 FPS not 50 FPS.
	6. using the audio token with the client PC. the MIC-in can't plug out when active, that may cause the IE crash.
	7. When client PC using IE and receive the audio track of G711 u-law or a-lat. 
	   the interval noise "da", "da"... may happen when the active-X play out this audio stream.(MS-filter)
	8. Test Dynamic GOP & Frame rate result exceed Spec ? range [20719].
	9. When executing "pan action",it suddenly occurs distortion at first.[21050]
	10. The frame_num in slice_header of 1fps streaming (Only I frame), will be 0 For QuickTime & will be 1 For NVR. 
	    For supporting both QuickTime & NVR, FW set frame_num to be 0, 1, 0, 1, 0, 1, 0, 1, 0, 1. [21733]
	11. QuickTime doesn't support resolution 3648x2736. [RDQ 136] 

########################################################################
A1D-500-V6.07.18
2014/06/13

Bootloader: BOOTLOADER-500-V01.11
A1 SDK: 2.00.46
dev_cap version: V1.2.44
ISP module version: 1.01.83 and A1_ISP: 1.01.83.29
ECM version: v1.0.0.71
Web UI:  V1.01.84
LibHttp: V1.02.05
OpenSSL V1.00.08
LibRtsp V1.00.46
Wan Daemon V1.00.25
Wan Daemon_api V1.00.10
DateTime Daemon V1.00.12
Gsoap library: V6.02.09
UPnP library: V1.00.05
LibLog library: V1.00.00

[New Features]
	
[Modified]
	1. E84A on Day/Night mode change cause light status display "yellow" & preview stop 
	2. No audio type camera, shouldn't show "Audio" setting in Setup page.
	3. The status of the checkbox  "Live view without account name and password" is wrong.
	4. Because the logs in /tmp/dbg/log is getting more and more with creating threads and will cause memory too less to run aistreamer ,  RD change LibLog library to V1.00.00 and add log.h.patch for closing the logs.

[Bug Fixed]

[Limitation]
	1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
	2. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and
	   cause the network to some errors occurred. This case only occurs the the D/N models.
	3. When OSG function is activated, the snapshot always captured image data from channel 1.
	4. FPS number of model I91/I92/I93/I94/I95/I96 is about 27 when the resolution is 1080p.
	5. On the High frame rate mode, the shutter speed might be the 1/100 sec in the 50Hz power line frequency environment. 
	   The image sensor outputs 60 FPS not 50 FPS.
	6. using the audio token with the client PC. the MIC-in can't plug out when active, that may cause the IE crash.
	7. When client PC using IE and receive the audio track of G711 u-law or a-lat. 
	   the interval noise "da", "da"... may happen when the active-X play out this audio stream.(MS-filter)
	8. Test Dynamic GOP & Frame rate result exceed Spec ? range [20719].
	9. When executing "pan action",it suddenly occurs distortion at first.[21050]
	10. The frame_num in slice_header of 1fps streaming (Only I frame), will be 0 For QuickTime & will be 1 For NVR. 
	    For supporting both QuickTime & NVR, FW set frame_num to be 0, 1, 0, 1, 0, 1, 0, 1, 0, 1. [21733]
	11. QuickTime doesn't support resolution 3648x2736. [RDQ 136] 

########################################################################
########################################################################
A1D-500-V6.07.17
2014/06/11

Bootloader: BOOTLOADER-500-V01.11
A1 SDK: 2.00.46
dev_cap version: V1.2.44
ISP module version: 1.01.83 and A1_ISP: 1.01.83.29
ECM version: v1.0.0.71
Web UI:  V1.01.83
LibHttp: V1.02.05
OpenSSL V1.00.08
LibRtsp V1.00.46
Wan Daemon V1.00.25
Wan Daemon_api V1.00.10
DateTime Daemon V1.00.12
Gsoap library: V6.02.09
UPnP library: V1.00.05
LibLog library: V1.00.00

[New Features]
	
[Modified]
	1. Double confirm the factors of "pll1" and "isp" on booting period.
	2. The firmware has to change the PTZ_PROTOCOLS='NB' when the PTZ_PROTOCOLS='AC' in the non-ACTi brand firmware during the boot. And, the PTZ_VENDOR='SONY,VISCA' is changed as well if the PTZ_VENDOR='ACTI,ACTI'. 
	3. Hidding Production ID & Model Number in OEM Model in system info of WebUI
	4. Because the logs in /tmp/dbg/log is getting more and more with creating threads and will cause memory too less to run aistreamer ,  RD change LibLog library to V1.00.00 and add log.h.patch for closing the logs.

[Bug Fixed]

[Limitation]
	1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
	2. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and
	   cause the network to some errors occurred. This case only occurs the the D/N models.
	3. When OSG function is activated, the snapshot always captured image data from channel 1.
	4. FPS number of model I91/I92/I93/I94/I95/I96 is about 27 when the resolution is 1080p.
	5. On the High frame rate mode, the shutter speed might be the 1/100 sec in the 50Hz power line frequency environment. 
	   The image sensor outputs 60 FPS not 50 FPS.
	6. using the audio token with the client PC. the MIC-in can't plug out when active, that may cause the IE crash.
	7. When client PC using IE and receive the audio track of G711 u-law or a-lat. 
	   the interval noise "da", "da"... may happen when the active-X play out this audio stream.(MS-filter)
	8. Test Dynamic GOP & Frame rate result exceed Spec ? range [20719].
	9. When executing "pan action",it suddenly occurs distortion at first.[21050]
	10. The frame_num in slice_header of 1fps streaming (Only I frame), will be 0 For QuickTime & will be 1 For NVR. 
	    For supporting both QuickTime & NVR, FW set frame_num to be 0, 1, 0, 1, 0, 1, 0, 1, 0, 1. [21733]
	11. QuickTime doesn't support resolution 3648x2736. [RDQ 136] 

########################################################################
########################################################################
A1D-500-V6.07.16
2014/06/09

Bootloader: BOOTLOADER-500-V01.11
A1 SDK: 2.00.46
dev_cap version: V1.2.44
ISP module version: 1.01.83 and A1_ISP: 1.01.83.29
ECM version: v1.0.0.71
Web UI:  V1.01.82
LibHttp: V1.02.05
OpenSSL V1.00.08
LibRtsp V1.00.46
Wan Daemon V1.00.25
Wan Daemon_api V1.00.10
DateTime Daemon V1.00.12
Gsoap library: V6.02.09
UPnP library: V1.00.05

[New Features]
	
[Modified]
	1. Add language xml files for Thailand 
	2. When user Export video, WebUI gray out all items until user clean the mark.	


[Bug Fixed]
	1. #24455		Change language by URL then log in Web via IP Utility, the Language will be change to "0" English
	2. #24633		B97 didn't have IRIS F1.4, but executed URL to F1.4 then IE return OK: IRIS_NUMBER='F14'
	3. #24636		[SDXC] File management, Ŀ MD, WebX{OXɶL
	4. #24643		[Suggestion]When export video plz gray other options. Likes format status.
	5. #24649		E44A File Managementɶ,vdbU,åBFWܱo۷wC
	6. #24777		Event can't upload message and snapshot to E-mail
	7. rdq#229	SD CardF}l۰ʬɡA|YǸªɮ״ݯdALkۥdWC


[Limitation]
	1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
	2. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and
	   cause the network to some errors occurred. This case only occurs the the D/N models.
	3. When OSG function is activated, the snapshot always captured image data from channel 1.
	4. FPS number of model I91/I92/I93/I94/I95/I96 is about 27 when the resolution is 1080p.
	5. On the High frame rate mode, the shutter speed might be the 1/100 sec in the 50Hz power line frequency environment. 
	   The image sensor outputs 60 FPS not 50 FPS.
	6. using the audio token with the client PC. the MIC-in can't plug out when active, that may cause the IE crash.
	7. When client PC using IE and receive the audio track of G711 u-law or a-lat. 
	   the interval noise "da", "da"... may happen when the active-X play out this audio stream.(MS-filter)
	8. Test Dynamic GOP & Frame rate result exceed Spec ? range [20719].
	9. When executing "pan action",it suddenly occurs distortion at first.[21050]
	10. The frame_num in slice_header of 1fps streaming (Only I frame), will be 0 For QuickTime & will be 1 For NVR. 
	    For supporting both QuickTime & NVR, FW set frame_num to be 0, 1, 0, 1, 0, 1, 0, 1, 0, 1. [21733]
	11. QuickTime doesn't support resolution 3648x2736. [RDQ 136] 

########################################################################
########################################################################
A1D-500-V6.07.15
2014/05/30

Bootloader: BOOTLOADER-500-V01.11
A1 SDK: 2.00.46
dev_cap version: V1.2.44
ISP module version: 1.01.83 and A1_ISP: 1.01.83.29
ECM version: v1.0.0.71
Web UI:  V1.01.80
LibHttp: V1.02.05
OpenSSL V1.00.08
LibRtsp V1.00.46
Wan Daemon V1.00.25
Wan Daemon_api V1.00.10
DateTime Daemon V1.00.12
Gsoap library: V6.02.07
UPnP library: V1.00.05

[New Features]
	
[Modified]
	1. Tcp2 service will actively disconnection if fail to get video frames continues over 30 second.

[Bug Fixed]
	1. #24635	 Event can't upload snapshot and video to FTP sever.
	2. #24642	 Always trigger motion , on file management check motion => time seek bar dispaly wrong status
	3. #24649  E44A File Managementɶ,vdbU,åBFWܱo۷wC
	4. #24647	 ]E31ASDIO, ĳNFile ManagementDIﶵ

[Limitation]
	1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
	2. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and
	   cause the network to some errors occurred. This case only occurs the the D/N models.
	3. When OSG function is activated, the snapshot always captured image data from channel 1.
	4. FPS number of model I91/I92/I93/I94/I95/I96 is about 27 when the resolution is 1080p.
	5. On the High frame rate mode, the shutter speed might be the 1/100 sec in the 50Hz power line frequency environment. 
	   The image sensor outputs 60 FPS not 50 FPS.
	6. using the audio token with the client PC. the MIC-in can't plug out when active, that may cause the IE crash.
	7. When client PC using IE and receive the audio track of G711 u-law or a-lat. 
	   the interval noise "da", "da"... may happen when the active-X play out this audio stream.(MS-filter)
	8. Test Dynamic GOP & Frame rate result exceed Spec ? range [20719].
	9. When executing "pan action",it suddenly occurs distortion at first.[21050]
	10. The frame_num in slice_header of 1fps streaming (Only I frame), will be 0 For QuickTime & will be 1 For NVR. 
	    For supporting both QuickTime & NVR, FW set frame_num to be 0, 1, 0, 1, 0, 1, 0, 1, 0, 1. [21733]
	11. QuickTime doesn't support resolution 3648x2736. [RDQ 136] 

########################################################################
########################################################################
A1D-500-V6.07.14
2014/05/28

Bootloader: BOOTLOADER-500-V01.11
A1 SDK: 2.00.46
dev_cap version: V1.2.44
ISP module version: 1.01.83 and A1_ISP: 1.01.83.29
ECM version: v1.0.0.70
Web UI:  V1.01.77
LibHttp: V1.02.05
OpenSSL V1.00.08
LibRtsp V1.00.46
Wan Daemon V1.00.25
Wan Daemon_api V1.00.10
DateTime Daemon V1.00.12
Gsoap library: V6.02.07
UPnP library: V1.00.05

[New Features]
	
[Modified]
	1. Slowest auto shutter and manual shutter speed can be set at high frame rate mode.
	2. Fixed the INVERT_DI URL CMD handler.
	3. Tcp2 service will actively disconnection if fail to get video frames continues over 1 second.
	4. Modify FW & ECM for new OEM scheme.
	5. Add sensor board type settings to E918, E918M, E919, E919M (level 4)

[Bug Fixed]
	1. #24468 I51إߤ@touringñҰ,Dual modeA^ePTZ, touring|~ʧ@
	2. #24457 [suggestion]Camera didn't have RTP_MULTI_AUDIO item, but executed URL then IE returned OK:V2_PORT_RTP_MULTI_AUDIO='6106'.

[Limitation]
	1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
	2. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and
	   cause the network to some errors occurred. This case only occurs the the D/N models.
	3. When OSG function is activated, the snapshot always captured image data from channel 1.
	4. FPS number of model I91/I92/I93/I94/I95/I96 is about 27 when the resolution is 1080p.
	5. On the High frame rate mode, the shutter speed might be the 1/100 sec in the 50Hz power line frequency environment. 
	   The image sensor outputs 60 FPS not 50 FPS.
	6. using the audio token with the client PC. the MIC-in can't plug out when active, that may cause the IE crash.
	7. When client PC using IE and receive the audio track of G711 u-law or a-lat. 
	   the interval noise "da", "da"... may happen when the active-X play out this audio stream.(MS-filter)
	8. Test Dynamic GOP & Frame rate result exceed Spec ? range [20719].
	9. When executing "pan action",it suddenly occurs distortion at first.[21050]
	10. The frame_num in slice_header of 1fps streaming (Only I frame), will be 0 For QuickTime & will be 1 For NVR. 
	    For supporting both QuickTime & NVR, FW set frame_num to be 0, 1, 0, 1, 0, 1, 0, 1, 0, 1. [21733]
	11. QuickTime doesn't support resolution 3648x2736. [RDQ 136] 

########################################################################
########################################################################
A1D-500-V6.07.13
2014/05/21

Bootloader: BOOTLOADER-500-V01.11
A1 SDK: 2.00.46
dev_cap version: V1.2.42
ISP module version: 1.01.83 and A1_ISP: 1.01.83.29
ECM version: v1.0.0.70
Web UI:  V1.01.73
LibHttp: V1.02.05
OpenSSL V1.00.08
LibRtsp V1.00.46
Wan Daemon V1.00.25
Wan Daemon_api V1.00.10
DateTime Daemon V1.00.12
Gsoap library: V6.02.07
UPnP library: V1.00.05

[New Features]
	1. IMX178 support 6M(3072x2048)@10FPS and only available in fisheye view mode.
	2. MT9P031 support 2592x1944@15FPS & 1440x1080@30FPS(duplicate frame), actual FPS is 14 in fisheye view mode.
	
[Modified]
	1. Turning off the debug macro define improves video jitter performance. (GETFRAME_DEBUG in vcap.c)
	
[Bug Fixed]
	1. #24299 The rotate function doesn't work in Ceiling mount \Single stream mode.
	2. #24362 [UI] I71 changes to different mounting type, video stream behaves incorrectly.
	3. #24373 eptz modeUhome positionb}ᤣ|ͮ
	4. #24470 TELE/WIDE control can't work using PTZ sample tool to test.
	5. #24453 URL PTZ_TOUR_NAME䴩 " " spece ( )
	6. #24466 [UI] Video Streams]w1, Factory default ,IE,s},ICamera Options, Video Streams|1
	7. #24438 [I91]Cancel check privacy setting back to default setting => Cause can't control PTZ on video seting preview
	8. #19219	 E96 live preview have latency issue & I92 Latency issue on live preview
	9. #24451 [SDXC]  Local Storage ]w`vA٨SeONQ~
	10. #24467 URL GET_RECORDING/GET_FRAMES L׫w@Ӯɶ,ڤWstart time|O1970/1/1
	11. The snapshot page does not reload when I move the IE to background then foreground.
	12. Send URL cmd GET_RECORDING, GET_FRAMES, GET_RAW without parameters will cause aistreamer crash.
	13. The UI does not show local storage after reload the WEB configurator when user inserted a micro-SD card 
( It's not ext3.)
	14. RDQ #147 	ePTZ mode, Wʨ̩Aɷ|զe
	15. RDQ #190	Export videoɡAɶפT


[Limitation]
	1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
	2. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and
	   cause the network to some errors occurred. This case only occurs the the D/N models.
	3. When OSG function is activated, the snapshot always captured image data from channel 1.
	4. FPS number of model I91/I92/I93/I94/I95/I96 is about 27 when the resolution is 1080p.
	5. On the High frame rate mode, the shutter speed might be the 1/100 sec in the 50Hz power line frequency environment. 
	   The image sensor outputs 60 FPS not 50 FPS.
	6. using the audio token with the client PC. the MIC-in can't plug out when active, that may cause the IE crash.
	7. When client PC using IE and receive the audio track of G711 u-law or a-lat. 
	   the interval noise "da", "da"... may happen when the active-X play out this audio stream.(MS-filter)
	8. Test Dynamic GOP & Frame rate result exceed Spec ? range [20719].
	9. When executing "pan action",it suddenly occurs distortion at first.[21050]
	10. The frame_num in slice_header of 1fps streaming (Only I frame), will be 0 For QuickTime & will be 1 For NVR. 
	    For supporting both QuickTime & NVR, FW set frame_num to be 0, 1, 0, 1, 0, 1, 0, 1, 0, 1. [21733]
	11. QuickTime doesn't support resolution 3648x2736. [RDQ 136] 

########################################################################
########################################################################
A1D-500-V6.07.12
2014/05/16
For  E213/E413/B910 P3 EVT

Bootloader: BOOTLOADER-500-V01.11
A1 SDK: 2.00.46
dev_cap version: V1.2.42
ISP module version: 1.01.84 and A1_ISP: 1.01.84.28
ECM version: v1.0.0.70
Web UI:  V1.01.68
LibHttp: V1.02.05
OpenSSL V1.00.08
LibRtsp V1.00.46
Wan Daemon V1.00.25
Wan Daemon_api V1.00.10
DateTime Daemon V1.00.12
Gsoap library: V6.02.05
UPnP library: V1.00.05


[Modified]

[Bug Fixed]
	1. #24295	Some information should be hidden in the System Information in WEB UI.
	2. #24296	Set URL VIDEO_RESOLUTION=N2592x1944 to OV5653=>Crash
	3. #24298	Switch preview to stream2(with lower resolution\frame rate\quality), sometimes the bandwidth doesn't reduce.
	4. #24305	E98 login.Live page.......... (fisheye view)
	5. #24306	E98 ..stream2 resolution., UI.....stream1 bit rate.6M
	6. [Fix] V2 Local storage - export file name "timezone" error. (Change to local time)
	7. [Fix] V2 Local storage - remove recoring file while SD card is full. 
	8. [Fix] V2 Local storage - Local time & Recording with timezone. 

[Limitation]
	1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
	2. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and
	   cause the network to some errors occurred. This case only occurs the the D/N models.
	3. When OSG function is activated, the snapshot always captured image data from channel 1.
	4. FPS number of model I91/I92/I93/I94/I95/I96 is about 27 when the resolution is 1080p.
	5. On the High frame rate mode, the shutter speed might be the 1/100 sec in the 50Hz power line frequency environment. 
	   The image sensor outputs 60 FPS not 50 FPS.
	6. using the audio token with the client PC. the MIC-in can't plug out when active, that may cause the IE crash.
	7. When client PC using IE and receive the audio track of G711 u-law or a-lat. 
	   the interval noise "da", "da"... may happen when the active-X play out this audio stream.(MS-filter)
	8. Test Dynamic GOP & Frame rate result exceed Spec ? range [20719].
	9. When executing "pan action",it suddenly occurs distortion at first.[21050]
	10. The frame_num in slice_header of 1fps streaming (Only I frame), will be 0 For QuickTime & will be 1 For NVR. 
	    For supporting both QuickTime & NVR, FW set frame_num to be 0, 1, 0, 1, 0, 1, 0, 1, 0, 1. [21733]
	11. QuickTime doesn't support resolution 3648x2736. [RDQ 136] 

########################################################################
A1D-500-V6.07.11
2014/05/13
Release purpose:  V6.07 formal release for 1st cut.
	              For  E214/E414/B410 P3 EVT

Bootloader: BOOTLOADER-500-V01.10
A1 SDK: 2.00.46
dev_cap version: V1.2.41
ISP module version: 1.01.83 and A1_ISP: 1.01.83.27
ECM version: v1.0.0.70
Web UI:  V1.01.64
LibHttp: V1.02.05
OpenSSL V1.00.08
LibRtsp V1.00.46
Wan Daemon V1.00.25
Wan Daemon_api V1.00.10
DateTime Daemon V1.00.11
Gsoap library: V6.02.05
UPnP library: V1.00.05


[Modified]

[Bug Fixed]
	1. [FIX] [E98][ISP]Stream 2 resolution change to 320x240 or 640x480=> image wil blurred
	2. [FIX] #23831	[ECM] Snapshot 1440x1080 resolution but check result resolution is 3648x2160	
	3. [FIX] V2 Local Storage IEۮeʰD (IE9 & IE11)
	4. [FIX] Set URL VIDEO_RESOLUTION=N2592x1944 to OV5653=>Crash

[Limitation]
	1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
	2. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and
	   cause the network to some errors occurred. This case only occurs the the D/N models.
	3. When OSG function is activated, the snapshot always captured image data from channel 1.
	4. FPS number of model I91/I92/I93/I94/I95/I96 is about 27 when the resolution is 1080p.
	5. On the High frame rate mode, the shutter speed might be the 1/100 sec in the 50Hz power line frequency environment. 
	   The image sensor outputs 60 FPS not 50 FPS.
	6. using the audio token with the client PC. the MIC-in can't plug out when active, that may cause the IE crash.
	7. When client PC using IE and receive the audio track of G711 u-law or a-lat. 
	   the interval noise "da", "da"... may happen when the active-X play out this audio stream.(MS-filter)
	8. Test Dynamic GOP & Frame rate result exceed Spec ? range [20719].
	9. When executing "pan action",it suddenly occurs distortion at first.[21050]
	10. The frame_num in slice_header of 1fps streaming (Only I frame), will be 0 For QuickTime & will be 1 For NVR. 
	    For supporting both QuickTime & NVR, FW set frame_num to be 0, 1, 0, 1, 0, 1, 0, 1, 0, 1. [21733]
	11. QuickTime doesn't support resolution 3648x2736. [RDQ 136] 

########################################################################
A1D-500-V6.07.10
2014/05/09
Release purpose:  V6.07 formal release for 1st cut.
	              For  B54 C4 EVT
                                   For  E31A/E32A/E33A/E34A/E35/E36  C3 EVT

Bootloader: BOOTLOADER-500-V01.10
A1 SDK: 2.00.46
dev_cap version: V1.2.41
ISP module version: 1.01.83 and A1_ISP: 1.01.83.27
ECM version: v1.0.0.69
Web UI:  V1.01.63
LibHttp: V1.02.05
OpenSSL V1.00.08
LibRtsp V1.00.46
Wan Daemon V1.00.25
Wan Daemon_api V1.00.10
DateTime Daemon V1.00.11
Gsoap library: V6.02.06
UPnP library: V1.00.05

[New Features]
	1. Add 8FPS to A1 cameras, cameras with sensor OV5653, AR0331(Max. Resolution >= 1280x960), OV4689
	2. Support V2 Local Storage	
	
[Modified]
	1. Modified Onvif Evnet Function

[Bug Fixed]
	1. #23423 	I51 live preview appear small dark side on left down when resolution change to 2592x1944 and 2048x1536.
	2. #23834 	Exposure Gain change to 255 then save & reboot cause enter to Night mode ( E919 no D/N switch function)
	3. #23031		I51 device PTZ function can't work when stream mode is EPTZ.
	4. #23432		On Fisheye mode plz hide PTZ control panel of WEB page
	5. #23830		[ECM][E98] No matter select which view mode, the output of the snapshots are all fisheye mode.
	6. #23837		[E98][ECM]View mode keep ePTZ or Paronama view, reflash WEB UI=> view becoms fisheye view

[Limitation]
	1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
	2. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and
	   cause the network to some errors occurred. This case only occurs the the D/N models.
	3. When OSG function is activated, the snapshot always captured image data from channel 1.
	4. FPS number of model I91/I92/I93/I94/I95/I96 is about 27 when the resolution is 1080p.
	5. On the High frame rate mode, the shutter speed might be the 1/100 sec in the 50Hz power line frequency environment. 
	   The image sensor outputs 60 FPS not 50 FPS.
	6. using the audio token with the client PC. the MIC-in can't plug out when active, that may cause the IE crash.
	7. When client PC using IE and receive the audio track of G711 u-law or a-lat. 
	   the interval noise "da", "da"... may happen when the active-X play out this audio stream.(MS-filter)
	8. Test Dynamic GOP & Frame rate result exceed Spec ? range [20719].
	9. When executing "pan action",it suddenly occurs distortion at first.[21050]
	10. The frame_num in slice_header of 1fps streaming (Only I frame), will be 0 For QuickTime & will be 1 For NVR. 
	    For supporting both QuickTime & NVR, FW set frame_num to be 0, 1, 0, 1, 0, 1, 0, 1, 0, 1. [21733]
	11. QuickTime doesn't support resolution 3648x2736. [RDQ 136] 

########################################################################
A1D-500-V6.07.09
2014/05/06 
For E11A/E12A/E13A C2 EVT
For E926/E927 P3 EVT

Bootloader: BOOTLOADER-500-V01.10
A1 SDK: 2.00.46
dev_cap version: V1.2.41
ISP module version: 1.01.81 and A1_ISP: 1.01.81.27
ECM version: v1.0.0.66
Web UI:  V1.01.60
LibHttp: V1.02.05
OpenSSL V1.00.08
LibRtsp V1.00.46
Wan Daemon V1.00.25
Wan Daemon_api V1.00.10
DateTime Daemon V1.00.11
Gsoap library: V6.02.05
UPnP library: V1.00.05

[New Features]
	1. video stream 2 has same video resolution configurations as video stream 1. Use Makefile management (Macro defined COPY_RES=1)
	
[Modified]
	1. OEM resolution customization on fisheye cameras
	2. Set the sensor driving current when init the ISP if SENSOR_BOARD_TYPE is defined in devcap file.

[Bug Fixed]
	1. The error code TCP_STREAM_ID_ERR should be returned in authentication process when host request video stream 2 in single streaming mode.

[Limitation]
	1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
	2. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and
	   cause the network to some errors occurred. This case only occurs the the D/N models.
	3. When OSG function is activated, the snapshot always captured image data from channel 1.
	4. FPS number of model I91/I92/I93/I94/I95/I96 is about 27 when the resolution is 1080p.
	5. On the High frame rate mode, the shutter speed might be the 1/100 sec in the 50Hz power line frequency environment. 
	   The image sensor outputs 60 FPS not 50 FPS.
	6. using the audio token with the client PC. the MIC-in can't plug out when active, that may cause the IE crash.
	7. When client PC using IE and receive the audio track of G711 u-law or a-lat. 
	   the interval noise "da", "da"... may happen when the active-X play out this audio stream.(MS-filter)
	8. Test Dynamic GOP & Frame rate result exceed Spec ? range [20719].
	9. When executing "pan action",it suddenly occurs distortion at first.[21050]
	10. The frame_num in slice_header of 1fps streaming (Only I frame), will be 0 For QuickTime & will be 1 For NVR. 
	    For supporting both QuickTime & NVR, FW set frame_num to be 0, 1, 0, 1, 0, 1, 0, 1, 0, 1. [21733]
	11. QuickTime doesn't support resolution 3648x2736. [RDQ 136] 

########################################################################
########################################################################
A1D-500-V6.07.08
2014/04/25
For E918/E919/E920/E921/E922/E923/E98 C3 EVT
For I73 P3 EVT

Bootloader: BOOTLOADER-500-V01.10
A1 SDK: 2.00.46
dev_cap version: V1.2.39
ISP module version: 1.01.80 and A1_ISP: 1.01.80.26
ECM version: v1.0.0.66
Web UI:  V1.01.59
LibHttp: V1.02.05
OpenSSL V1.00.08
LibRtsp V1.00.46
Wan Daemon V1.00.25
Wan Daemon_api V1.00.10
DateTime Daemon V1.00.11
Gsoap library: V6.02.04
UPnP library: V1.00.05

[New Features]
	1. video stream add the "SINGLE" mode.
	2. Add MAX_VIDEO_STREAMS information on SYSTEM_INFO url.
	3. Add AUDIO_MIC_OPTION and AUDIO_IN_LEVEL_OPTION information on SYSTM_INFO url.
	4. Add QUERYLS, GET_RECORDING, GET_FRAMES, IRCUT_CONTROL, AUDIO_MIC_TYPE, AUDIO_IN_LEVEL in system CGI.
	5. Add 1280x960 video resolution in the video stream 2 only for low-cost fisheye camera.
	6. Support 20fps@2048x1536 on the sensor is AR0331 models.
	7. Add 1280x960@30fps on the sensor is AR0331 and fixed on the 1.3M models.
	8. Add RTC information to the System Log.
	
[Modified]
	1. Modify Audio UI. (Add 
	2. Modify PTZ_VENDOR URL cmd.

[Bug Fixed]
	1. #23422 I51 manual exposure mode doesn't work.
	2. #23435 [I71]Stream mode is fisheye mode lost miniature fisheye view windows
	3. #23431	[UI]On ePTZ mode change to stream2 move PTZ change to mouse PTZ icon
	4. #23425	Executed IR Cut Control URL, Web return ERROR: IRCUT_CONTROL='ON' not found.
	5. #23422	I51 manual exposure mode doesn't work.
	6. #23423	I51 live preview appear small dark side on left down when resolution change to 2592x1944 and 2048x1536.
	7. #RDQ156	I51/I71 Fisheye modeUFisheye view snapshotUϤҿ~
	8. #RDQ155	I51/I71 Fisheye modeUePTZMpanorama UMiniaturepϨSX{

[Limitation]
	1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
	2. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and
	   cause the network to some errors occurred. This case only occurs the the D/N models.
	3. When OSG function is activated, the snapshot always captured image data from channel 1.
	4. FPS number of model I91/I92/I93/I94/I95/I96 is about 27 when the resolution is 1080p.
	5. On the High frame rate mode, the shutter speed might be the 1/100 sec in the 50Hz power line frequency environment. 
	   The image sensor outputs 60 FPS not 50 FPS.
	6. using the audio token with the client PC. the MIC-in can't plug out when active, that may cause the IE crash.
	7. When client PC using IE and receive the audio track of G711 u-law or a-lat. 
	   the interval noise "da", "da"... may happen when the active-X play out this audio stream.(MS-filter)
	8. Test Dynamic GOP & Frame rate result exceed Spec ? range [20719].
	9. When executing "pan action",it suddenly occurs distortion at first.[21050]
	10. The frame_num in slice_header of 1fps streaming (Only I frame), will be 0 For QuickTime & will be 1 For NVR. 
	    For supporting both QuickTime & NVR, FW set frame_num to be 0, 1, 0, 1, 0, 1, 0, 1, 0, 1. [21733]
	11. QuickTime doesn't support resolution 3648x2736. [RDQ 136] 

########################################################################
########################################################################
A1D-500-V6.07.07
2014/04/18
This is a SBA firmware to solve the camera can't return to DAY state.
All D&N cameras with AR0331 / IMX122 / IMX222 have this bug.

Bootloader: BOOTLOADER-500-V01.10
A1 SDK: 2.00.44
dev_cap version: V1.2.36
ISP module version: 1.01.79 and A1_ISP: 1.01.79.26
ECM version: v1.0.0.65
Web UI:  V1.01.58
LibHttp: V1.02.05
OpenSSL V1.00.08
LibRtsp V1.00.46
Wan Daemon V1.00.25
Wan Daemon_api V1.00.10
DateTime Daemon V1.00.11
Gsoap library: V6.02.03
UPnP library: V1.00.05

[New Features]
	1. video stream add the "SINGLE" mode.
	2. add AUDIO_MIC_OPTION and AUDIO_IN_OPTION information on SYSTM_INFO url.
	3. add IRCUT_CONTROL, AUDIO_MIC_TYPE, AUDIO_IN_LEVEL in encoder CGI.
	
[Modified]
	1. The stream mode is eptz mode need to suspend the motion detection function and then the stream mode change back to dual or fisheye mode the motion detection function need to be resumed.

[Bug Fixed]
	1. fix the B2X series camera (Zoom lens + serail port) can't set preset points.
	2. STREAMING_MODE_CAP and STREAMING_MODE information incorrect on SYSTEM_INFO url.

[Limitation]
	1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
	2. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and
	   cause the network to some errors occurred. This case only occurs the the D/N models.
	3. When OSG function is activated, the snapshot always captured image data from channel 1.
	4. FPS number of model I91/I92/I93/I94/I95/I96 is about 27 when the resolution is 1080p.
	5. On the High frame rate mode, the shutter speed might be the 1/100 sec in the 50Hz power line frequency environment. 
	   The image sensor outputs 60 FPS not 50 FPS.
	6. using the audio token with the client PC. the MIC-in can't plug out when active, that may cause the IE crash.
	7. When client PC using IE and receive the audio track of G711 u-law or a-lat. 
	   the interval noise "da", "da"... may happen when the active-X play out this audio stream.(MS-filter)
	8. Test Dynamic GOP & Frame rate result exceed Spec ? range [20719].
	9. When executing "pan action",it suddenly occurs distortion at first.[21050]
	10. The frame_num in slice_header of 1fps streaming (Only I frame), will be 0 For QuickTime & will be 1 For NVR. 
	    For supporting both QuickTime & NVR, FW set frame_num to be 0, 1, 0, 1, 0, 1, 0, 1, 0, 1. [21733]
	11. QuickTime doesn't support resolution 3648x2736. [RDQ 136] 

########################################################################
########################################################################
A1D-500-V6.07.06
2014/04/11  for E48 P3 EVT

Be noted that this firmware could not be used with the DBE models with zoom lens but not include B9x.

=========================================================================
= ISP-0011-v1.01.77, A1 SoC ( Only for E813 & E48 P3, Don't update to other models )
=========================================================================

Bootloader: BOOTLOADER-500-V01.10
A1 SDK: 2.00.44
dev_cap version: V1.2.36
ISP module version: 1.01.77 and A1_ISP: 1.01.77.25
ECM version: v1.0.0.65
Web UI:  V1.01.58
LibHttp: V1.02.05
OpenSSL V1.00.08
LibRtsp V1.00.46
Wan Daemon V1.00.25
Wan Daemon_api V1.00.10
DateTime Daemon V1.00.11
Gsoap library: V6.02.02
UPnP library: V1.00.05

[New Features]
	1. Fixed on the 1.3M resolution with sensor is AR0331 camera (ex:E64) will support 1280x960 resolution.
           (Waiting for next version of DevCap)
	
[Modified]
	1. modified the dynamic query fps capability mechanism.
	2. C2B fisheye 5M resolution	
	3. MT9J003 4K2K  FPS 7 	
	4. STREAMING_MODE_CAP and STREAMING_MODE formation incorrect on SYSTEM_INFO url in I51/I71 camera	


[Bug Fixed]
	1. fix the B2X series camera (Zoom lens + serail port) can't set preset points.
	2. STREAMING_MODE_CAP and STREAMING_MODE information incorrect on SYSTEM_INFO url.
	3. #23159	B21/B24/B25 RS-485Lkǰe
	4. #23180	[EVT] E919 resolution]2048x1536, Live pagesnapshot, ^UӪɥkPW|
	5. #23047	I51 device motion can be trigger when stream mode is EPTZ
	6. #22786	[ONVIF] set bitrate fail via NVR3 (1.500M --> 1.5M)

[Limitation]
	1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
	2. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and
	   cause the network to some errors occurred. This case only occurs the the D/N models.
	3. When OSG function is activated, the snapshot always captured image data from channel 1.
	4. FPS number of model I91/I92/I93/I94/I95/I96 is about 27 when the resolution is 1080p.
	5. On the High frame rate mode, the shutter speed might be the 1/100 sec in the 50Hz power line frequency environment. 
	   The image sensor outputs 60 FPS not 50 FPS.
	6. using the audio token with the client PC. the MIC-in can't plug out when active, that may cause the IE crash.
	7. When client PC using IE and receive the audio track of G711 u-law or a-lat. 
	   the interval noise "da", "da"... may happen when the active-X play out this audio stream.(MS-filter)
	8. Test Dynamic GOP & Frame rate result exceed Spec ? range [20719].
	9. When executing "pan action",it suddenly occurs distortion at first.[21050]
	10. The frame_num in slice_header of 1fps streaming (Only I frame), will be 0 For QuickTime & will be 1 For NVR. 
	    For supporting both QuickTime & NVR, FW set frame_num to be 0, 1, 0, 1, 0, 1, 0, 1, 0, 1. [21733]
	11. QuickTime doesn't support resolution 3648x2736. [RDQ 136] 
########################################################################
########################################################################

A1D-500-V6.07.05
2014/04/03
Important Note:
=========================================================================
= ISP-0011-v1.01.76, A1 SoC ( Only for E816 P3, Don't update to other models )
=========================================================================

Bootloader: BOOTLOADER-500-V01.10
A1 SDK: 2.00.43
dev_cap version: V1.2.36
ISP module version: 1.01.76 and A1_ISP: 1.01.76.24
ECM version: v1.0.0.64
Web UI:  V1.01.57
LibHttp: V1.02.05
OpenSSL V1.00.08
LibRtsp V1.00.46
Wan Daemon V1.00.25
Wan Daemon_api V1.00.10
DateTime Daemon V1.00.11
Gsoap library: V6.02.01
UPnP library: V1.00.05

[Modified]
	1. Merge V2 storage code base by skyter and update the ACTiApps/Makefile for sqlite configing & compiling.
	2. Change ZOOM_LENS='4.3x' to 4x in E616, E815, E816. Not use floating point in the ZOOM_LENS and ZOOM_RATIO_LIMIT.
	3. Change default E98 mirror/flip setting from Off to On.

[Limitation]
	1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
	2. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and
	   cause the network to some errors occurred. This case only occurs the the D/N models.
	3. When OSG function is activated, the snapshot always captured image data from channel 1.
	4. FPS number of model I91/I92/I93/I94/I95/I96 is about 27 when the resolution is 1080p.
	5. On the High frame rate mode, the shutter speed might be the 1/100 sec in the 50Hz power line frequency environment. 
	   The image sensor outputs 60 FPS not 50 FPS.
	6. using the audio token with the client PC. the MIC-in can't plug out when active, that may cause the IE crash.
	7. When client PC using IE and receive the audio track of G711 u-law or a-lat. 
	   the interval noise "da", "da"... may happen when the active-X play out this audio stream.(MS-filter)
	8. Test Dynamic GOP & Frame rate result exceed Spec ? range [20719].
	9. When executing "pan action",it suddenly occurs distortion at first.[21050]
	10. The frame_num in slice_header of 1fps streaming (Only I frame), will be 0 For QuickTime & will be 1 For NVR. 
	    For supporting both QuickTime & NVR, FW set frame_num to be 0, 1, 0, 1, 0, 1, 0, 1, 0, 1. [21733]
	11. QuickTime doesn't support resolution 3648x2736. [RDQ 136] 

########################################################################
########################################################################
A1D-500-V6.07.04
2014/03/31
	
Bootloader: BOOTLOADER-500-V01.10
A1 SDK: 2.00.43
dev_cap version: V1.2.33
ISP module version: 1.01.75 and A1_ISP: 1.01.75.24
ECM version: v1.0.0.64
Web UI:  V1.01.57
LibHttp: V1.02.05
OpenSSL V1.00.08
LibRtsp V1.00.45
Wan Daemon V1.00.25
Wan Daemon_api V1.00.10
DateTime Daemon V1.00.11
Gsoap library: V6.02.01
UPnP library: V1.00.05

[New Features]
	1. Add GET_BLACKBOX_MSG in test CGI for RD debug.
	2. Add AUDIO_IN_LEVEL in system CGI for WM8940 audio codec, and add WM8940_AUDIO_IN_LEVEL in test cgi for debug.
	3. Add TROUBLE_SHOOTING_CONTROL, STAY_TROUBLESHOOTING in test cgi.

[Modified]
	1. Jitter improvement.
	2. Touring group extends to 16.
	3. Tcp2 connection count extends to 20.
	4. eptz mode only support SONY/VISCA on the high-end fisheye camera.
	
[Bug Fixed]
	1. RDQ 150 	I51/I71 Physical installation Angle S@
	2. RDQ 151 	I51/I71 Rotation Degrees per Click ]wSave & Reboot emt
	3. RDQ 152 	I51/I71 Top/Bottom  Tilt Angle ]wExposure Mode |yTilt Angle
	4. RDQ 154 	I51&I71 factory defaultAePTZ modeAePTZL@ΡC
	5. 22966	video framePframeɶjtZLj
	
[Limitation]
	1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
	2. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and
	   cause the network to some errors occurred. This case only occurs the the D/N models.
	3. When OSG function is activated, the snapshot always captured image data from channel 1.
	4. FPS number of model I91/I92/I93/I94/I95/I96 is about 27 when the resolution is 1080p.
	5. On the High frame rate mode, the shutter speed might be the 1/100 sec in the 50Hz power line frequency environment. 
	   The image sensor outputs 60 FPS not 50 FPS.
	6. using the audio token with the client PC. the MIC-in can't plug out when active, that may cause the IE crash.
	7. When client PC using IE and receive the audio track of G711 u-law or a-lat. 
	   the interval noise "da", "da"... may happen when the active-X play out this audio stream.(MS-filter)
	8. Test Dynamic GOP & Frame rate result exceed Spec ? range [20719].
	9. When executing "pan action",it suddenly occurs distortion at first.[21050]
	10. The frame_num in slice_header of 1fps streaming (Only I frame), will be 0 For QuickTime & will be 1 For NVR. 
	    For supporting both QuickTime & NVR, FW set frame_num to be 0, 1, 0, 1, 0, 1, 0, 1, 0, 1. [21733]
	11. QuickTime doesn't support resolution 3648x2736. [RDQ 136] 

########################################################################
########################################################################
A1D-500-V6.07.03
2014/03/26
	
Bootloader: BOOTLOADER-500-V01.10
A1 SDK: 2.00.43
dev_cap version: V1.2.33
ISP module version: 1.01.75 and A1_ISP: 1.01.75.24
ECM version: v1.0.0.63
Web UI:  V1.01.56
LibHttp: V1.02.05
OpenSSL V1.00.08
LibRtsp V1.00.45
Wan Daemon V1.00.25
Wan Daemon_api V1.00.10
DateTime Daemon V1.00.10
Gsoap library: V6.02.01
UPnP library: V1.00.05

[New Features]
	1. Add GET_BLACKBOX_MSG in test CGI for RD debug.
	2. Add AUDIO_IN_LEVEL in system CGI for WM8940 audio codec, and add WM8940_AUDIO_IN_LEVEL in test cgi for debug.
	3. Add TROUBLE_SHOOTING_CONTROL, STAY_TROUBLESHOOTING in test cgi.

[Modified]
	1. Jitter improvement.
	2. Touring group extends to 16.
	3. Tcp2 connection count extends to 20.
	4. eptz mode only support SONY/VISCA on the high-end fisheye camera.
	
[Bug Fixed]
	1. RDQ 150 	I51/I71 Physical installation Angle S@
	2. RDQ 151 	I51/I71 Rotation Degrees per Click ]wSave & Reboot emt
	3. RDQ 152 	I51/I71 Top/Bottom  Tilt Angle ]wExposure Mode |yTilt Angle
	4. RDQ 154 	I51&I71 factory defaultAePTZ modeAePTZL@ΡC
	5. 22966	video framePframeɶjtZLj
	
[Limitation]
	1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
	2. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and
	   cause the network to some errors occurred. This case only occurs the the D/N models.
	3. When OSG function is activated, the snapshot always captured image data from channel 1.
	4. FPS number of model I91/I92/I93/I94/I95/I96 is about 27 when the resolution is 1080p.
	5. On the High frame rate mode, the shutter speed might be the 1/100 sec in the 50Hz power line frequency environment. 
	   The image sensor outputs 60 FPS not 50 FPS.
	6. using the audio token with the client PC. the MIC-in can't plug out when active, that may cause the IE crash.
	7. When client PC using IE and receive the audio track of G711 u-law or a-lat. 
	   the interval noise "da", "da"... may happen when the active-X play out this audio stream.(MS-filter)
	8. Test Dynamic GOP & Frame rate result exceed Spec ? range [20719].
	9. When executing "pan action",it suddenly occurs distortion at first.[21050]
	10. The frame_num in slice_header of 1fps streaming (Only I frame), will be 0 For QuickTime & will be 1 For NVR. 
	    For supporting both QuickTime & NVR, FW set frame_num to be 0, 1, 0, 1, 0, 1, 0, 1, 0, 1. [21733]
	11. QuickTime doesn't support resolution 3648x2736. [RDQ 136] 

########################################################################
########################################################################
A1D-500-V6.07.01
2014/03/12
	
Bootloader: BOOTLOADER-500-V01.10
A1 SDK: 2.00.41
dev_cap version: V1.2.31
ISP module version: 1.01.74 and A1_ISP: 1.01.74.24
ECM version: v1.0.0.61
Web UI:  V1.01.51
LibHttp: V1.02.05
OpenSSL V1.00.08
LibRtsp V1.00.45
Wan Daemon V1.00.25
Wan Daemon_api V1.00.10
DateTime Daemon V1.00.05
Gsoap library: V6.02.00

[New Features]
	1. Add new resolution mode for 10MP(3648x2736)@7fps
	2. [C2B] When we changed the streaming mode, previously effective of touring state should be retained while waiting for the next return the ePTZ mode can be restarted.
	3. [C2B]support the mouse ptz(send the serial hex string via the control port) on the ePTZ mode.
	4. [C2B]implement the relative rotation on the ePTZ mode.
	5. Add PTZ_E_FLIP in the encoder CGI for B9X serial cameras.

[Modified]
	1. Jffs2 file system should be unmounted when the system enters the restart phase.
	
[Bug Fixed]
	1. Resolve Day and Night switch bug for mode 3648x2160 at Sensor of MT9J003
	2.  Bug 	21829 	[B44]IRIS control F1.4 settiing Fail
	3.  Bug 	22302	Mouse PTZ WX Live Preview إ~
	4.  Bug	22496	[Suggestion]PTZ Panel Return Position "Disable"jpgPDigital Zoom "Disable"@P
	5.  Bug	16235	Manual shutter & shutter speed setting 1/120 then change WDR cause snapshot pop "Error, Get a snapshot" message
	6.  Bug	22655	[I91]On seting mask mode then click reset button=> Can be use mouse PTZ to move PTZ
	
[Limitation]
	1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
	2. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and
	   cause the network to some errors occurred. This case only occurs the the D/N models.
	3. When OSG function is activated, the snapshot always captured image data from channel 1.
	4. FPS number of model I91/I92/I93/I94/I95/I96 is about 27 when the resolution is 1080p.
	5. On the High frame rate mode, the shutter speed might be the 1/100 sec in the 50Hz power line frequency environment. 
	   The image sensor outputs 60 FPS not 50 FPS.
	6. using the audio token with the client PC. the MIC-in can't plug out when active, that may cause the IE crash.
	7. When client PC using IE and receive the audio track of G711 u-law or a-lat. 
	   the interval noise "da", "da"... may happen when the active-X play out this audio stream.(MS-filter)
	8. Test Dynamic GOP & Frame rate result exceed Spec ? range [20719].
	9. When executing "pan action",it suddenly occurs distortion at first.[21050]
	10. The frame_num in slice_header of 1fps streaming (Only I frame), will be 0 For QuickTime & will be 1 For NVR. 
	    For supporting both QuickTime & NVR, FW set frame_num to be 0, 1, 0, 1, 0, 1, 0, 1, 0, 1. [21733]
	11. QuickTime doesn't support resolution 3648x2736. [RDQ 136] 

########################################################################
########################################################################
A1D-500-V6.07.00
2014/02/25
Release purpose: for B27/B47/E2X ES

	
Bootloader: BOOTLOADER-500-V01.10
A1 SDK: 2.00.41
dev_cap version: V1.2.31
ISP module version: 1.01.72 and A1_ISP: 1.01.72.22
ECM version: v1.0.0.59
Web UI:  V1.01.47
LibHttp: V1.02.05
OpenSSL V1.00.08
LibRtsp V1.00.45
Wan Daemon V1.00.25
Wan Daemon_api V1.00.10
DateTime Daemon V1.00.05
Gsoap library: V6.01.25

[Limitation]
	1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
	2. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and
	   cause the network to some errors occurred. This case only occurs the the D/N models.
	3. When OSG function is activated, the snapshot always captured image data from channel 1.
	4. FPS number of model I91/I92/I93/I94/I95/I96 is about 27 when the resolution is 1080p.
	5. On the High frame rate mode, the shutter speed might be the 1/100 sec in the 50Hz power line frequency environment. 
	   The image sensor outputs 60 FPS not 50 FPS.
	6. using the audio token with the client PC. the MIC-in can't plug out when active, that may cause the IE crash.
	7. When client PC using IE and receive the audio track of G711 u-law or a-lat. 
	   the interval noise "da", "da"... may happen when the active-X play out this audio stream.(MS-filter)
	8. Test Dynamic GOP & Frame rate result exceed Spec ? range [20719].
	9. When executing "pan action",it suddenly occurs distortion at first.[21050]
	10. The frame_num in slice_header of 1fps streaming (Only I frame), will be 0 For QuickTime & will be 1 For NVR. 
	    For supporting both QuickTime & NVR, FW set frame_num to be 0, 1, 0, 1, 0, 1, 0, 1, 0, 1. [21733]
	11. QuickTime doesn't support resolution 3648x2736. [RDQ 136] 
	12. The camera of sensor MT9J003 (3648X2160) can not switch back to day mode after changing to night mode.

########################################################################
########################################################################
A1D-500-V6.06.16
2014/02/25
Release purpose:  V6.06 formal release for 3rd cut.

	
Bootloader: BOOTLOADER-500-V01.10
A1 SDK: 2.00.41
dev_cap version: V1.2.31
ISP module version: 1.01.68 and A1_ISP: 1.01.68.22
ECM version: v1.0.0.59
Web UI:  V1.01.47
LibHttp: V1.02.05
OpenSSL V1.00.08
LibRtsp V1.00.45
Wan Daemon V1.00.25
Wan Daemon_api V1.00.10
DateTime Daemon V1.00.05
Gsoap library: V6.01.25

[Limitation]
	1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
	2. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and
	   cause the network to some errors occurred. This case only occurs the the D/N models.
	3. When OSG function is activated, the snapshot always captured image data from channel 1.
	4. FPS number of model I91/I92/I93/I94/I95/I96 is about 27 when the resolution is 1080p.
	5. On the High frame rate mode, the shutter speed might be the 1/100 sec in the 50Hz power line frequency environment. 
	   The image sensor outputs 60 FPS not 50 FPS.
	6. using the audio token with the client PC. the MIC-in can't plug out when active, that may cause the IE crash.
	7. When client PC using IE and receive the audio track of G711 u-law or a-lat. 
	   the interval noise "da", "da"... may happen when the active-X play out this audio stream.(MS-filter)
	8. Test Dynamic GOP & Frame rate result exceed Spec ? range [20719].
	9. When executing "pan action",it suddenly occurs distortion at first.[21050]
	10. The frame_num in slice_header of 1fps streaming (Only I frame), will be 0 For QuickTime & will be 1 For NVR. 
	    For supporting both QuickTime & NVR, FW set frame_num to be 0, 1, 0, 1, 0, 1, 0, 1, 0, 1. [21733]
	11. QuickTime doesn't support resolution 3648x2736. [RDQ 136] 
	12. The camera of sensor MT9J003 (3648X2160) can not switch back to day mode after changing to night mode.

########################################################################
########################################################################
A1D-500-V6.06.15
2014/02/17
Release purpose: 
	1. V6.06 formal release for 2nd cut.
	2. for I51/I71 C2 EVT
	
Bootloader: BOOTLOADER-500-V01.10
A1 SDK: 2.00.41
dev_cap version: V1.2.31
ISP module version: 1.01.66 and A1_ISP: 1.01.66.22
ECM version: v1.0.0.59
Web UI:  V1.01.47
LibHttp: V1.02.05
OpenSSL V1.00.08
LibRtsp V1.00.45
Wan Daemon V1.00.25
Wan Daemon_api V1.00.10
DateTime Daemon V1.00.05
Gsoap library: V6.01.25

[New Features]
	1. For supporting storage on edge integration, add two URLs, GET_CURRENT_TIME and DISK_FILE_SEARCH_UTC_TIME in the system CGI.
	2. Add the UTC attribute in the reply of DISK_FILE_LIST URL.
	3. Add IR_EXPOSURE_COMPENSATION in the encoder CGI.

[Modified]
	1. Hide Profile ID & Sensor ID in WebUI System Info
	2. Http server extended the max connection to 20. 
	3. Start time of video recording Refer B2 Time stamp.
	4. Increase the 'e2fsck' accepted range from return value.
	   The accepted range from 0 <-> 4.
  	   0 - No errors.
	   1 - File system errors corrected.
	   2 - File system errors corrected, system should be rebooted.
	   4 - File system errors left uncorrected.
	
[Bug Fixed]
	1. Fixed Firmware Version of NB can appear in system-info page

[Limitation]
	1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
	2. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and
	   cause the network to some errors occurred. This case only occurs the the D/N models.
	3. When OSG function is activated, the snapshot always captured image data from channel 1.
	4. FPS number of model I91/I92/I93/I94/I95/I96 is about 27 when the resolution is 1080p.
	5. On the High frame rate mode, the shutter speed might be the 1/100 sec in the 50Hz power line frequency environment. 
	   The image sensor outputs 60 FPS not 50 FPS.
	6. using the audio token with the client PC. the MIC-in can't plug out when active, that may cause the IE crash.
	7. When client PC using IE and receive the audio track of G711 u-law or a-lat. 
	   the interval noise "da", "da"... may happen when the active-X play out this audio stream.(MS-filter)
	8. Test Dynamic GOP & Frame rate result exceed Spec ? range [20719].
	9. When executing "pan action",it suddenly occurs distortion at first.[21050]
	10. The frame_num in slice_header of 1fps streaming (Only I frame), will be 0 For QuickTime & will be 1 For NVR. 
	    For supporting both QuickTime & NVR, FW set frame_num to be 0, 1, 0, 1, 0, 1, 0, 1, 0, 1. [21733]
	11. QuickTime doesn't support resolution 3648x2736. [RDQ 136] 

########################################################################
########################################################################
A1D-500-V6.06.14
2014/02/05
Update Gsoap to V6.01.24.
	1. Set keep alive of a poll point service when there is no InitialTerminationTime in the
	   CreatePullPointSubscription. No termination time in the CreatePullPointResponse then.
	2. skip the prefix when check the soap->tag in the CheckAccessClass().

########################################################################
########################################################################
A1D-500-V6.06.13
2014/01/24
Release purpose: V6.06 formal release for 1st cut.
	
Bootloader: BOOTLOADER-500-V01.10
A1 SDK: 2.00.41
dev_cap version: V1.2.29
ISP module version: 1.01.65 and A1_ISP: 1.01.65.21
ECM version: v1.0.0.59
Web UI:  V1.01.44
LibHttp: V1.02.04
OpenSSL V1.00.08
LibRtsp V1.00.42
Wan Daemon V1.00.25
Wan Daemon_api V1.00.10
DateTime Daemon V1.00.05
Gsoap library: V6.01.23

[New Features]
	1. PTZ Idle position.
	
[Bug Fixed]
	1. 21937        Set Audio in sensitivity "low", no music can be heard from PC earphone
	2. 19827        B52 resolution 3648x2736, UI Snapshot fail
	3. 21890        B45 devcapZOOM_LENS / ZOOM_RATIO_LIMITŦXMarketing Spec
	4. 21828        [I91] Camera cannot stop zooming after press zoom in\out button in NVR3 PTZ control panel .
	5. 21222        [PTZ sample]PELCOD OR PELCOP of Pan/tilt can't work on PTZ sample
	4. 21317        Hight frame mode 50Hz, use frame check result isn't match 50 ?1
	5. 21318        Hight frame mode 50Hz, use frame check result isn't match 50 ?1
	6. 21492        Use I95 to executed pan action will occurs halt.
	7. 21493        Use I95 to executed mouse pan/tilt action, when switch speed will occurs halt.
	8. 20489        ĳUI Connection Typeవb]p
	9. 21831		[B44]AE change to 200 can't auto change to Night mode ( Turn off all light)	
	10. 21946	B97 can't use PTZ sample to control pan/tilt	
	11. 21182	Edge Recorder Client sometimes showed nothing on search result but it indeed had data
	12. 21188	Search event several time will pop up error msg.
 	13. RDQ 139	ISP Upgrade & downgrade fail	   
	14. RDQ 141	Video Default settingAeⰾ
	15. RDQ 143	When Touring, pGZOOM in/out{]tdigital ZOOMAi|U@preset point.
	16. RDQ 114	OV9715 encoder=MJPEG Stream1=N1280x720 TCP  30 frame
	17. RDQ 131	I9x Auto Scan pop error message 
	18. RDQ 132	I9x Auto Scan control button issue 
	19. RDQ 138 	Idle position ɶp⤣TC
	20. RDQ 115 	]wMANUAL_CONTROLAEvent List]wܬmotion
	21. RDQ 133 	When format, UI options didn't change to gray status
	22. RDQ 127 	In High Frame Rate mode, Line Frequency]50HzAVIDEO_FPS_CURRENTƭȤT
	23. RDQ 128 	Edti TourAܤ`
	24. RDQ 144 	OSD background missing

[Modified]
	1. Hide Profile ID & Sensor ID in WebUI System Info

[Limitation]
	1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
	2. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and
	   cause the network to some errors occurred. This case only occurs the the D/N models.
	3. When OSG function is activated, the snapshot always captured image data from channel 1.
	4. FPS number of model I91/I92/I93/I94/I95/I96 is about 27 when the resolution is 1080p.
	5. On the High frame rate mode, the shutter speed might be the 1/100 sec in the 50Hz power line frequency environment. 
	   The image sensor outputs 60 FPS not 50 FPS.
	6. using the audio token with the client PC. the MIC-in can't plug out when active, that may cause the IE crash.
	7. When client PC using IE and receive the audio track of G711 u-law or a-lat. 
	   the interval noise "da", "da"... may happen when the active-X play out this audio stream.(MS-filter)
	8. Test Dynamic GOP & Frame rate result exceed Spec ? range [20719].
	9. When executing "pan action",it suddenly occurs distortion at first.[21050]
	10. The frame_num in slice_header of 1fps streaming (Only I frame), will be 0 For QuickTime & will be 1 For NVR. 
	    For supporting both QuickTime & NVR, FW set frame_num to be 0, 1, 0, 1, 0, 1, 0, 1, 0, 1. [21733]
	11. QuickTime doesn't support resolution 3648x2736. [RDQ 136] 

########################################################################
########################################################################
A1D-500-V6.06.12
Update Gsoap for fisheye camera resolution management. This firmware is for RDQ to test the onvif.
Date: 2014/01/22 by Anne.Chen.

########################################################################
########################################################################
A1D-500-V6.06.11
2014/01/17
Release purpose: 
	1. C2 EVT: D61A/D62A/D64A/D65A/E61A/E62A/E63A/E64A/E65A/E66A/E67A/E68
	
Bootloader: BOOTLOADER-500-V01.10
A1 SDK: 2.00.40
dev_cap version: V1.2.26
ISP module version: 1.01.63 and A1_ISP: 1.01.63.21
ECM version: v1.0.0.58
Web UI:  V1.01.41
LibHttp: V1.02.02
OpenSSL V1.00.08
LibRtsp V1.00.42
Wan Daemon V1.00.25
Wan Daemon_api V1.00.10
DateTime Daemon V1.00.05
Gsoap library: V6.01.22
	
[Limitation]
    1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
    2. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and
       cause the network to some errors occurred. This case only occurs the the D/N models.
    3. When OSG function is activated, the snapshot always captured image data from channel 1.
    4. FPS number of model I91/I92/I93/I94/I95/I96 is about 27 when the resolution is 1080p.
	5. On the High frame rate mode, the shutter speed might be the 1/100 sec in the 50Hz power line frequency environment. 
	   The image sensor outputs 60 FPS not 50 FPS.
	6. using the audio token with the client PC. the MIC-in can't plug out when active, that may cause the IE crash.
	7. When client PC using IE and receive the audio track of G711 u-law or a-lat. 
		the interval noise "da", "da"... may happen when the active-X play out this audio stream.(MS-filter)

########################################################################
########################################################################
A1D-500-V6.06.09
2014/01/10
Release purpose: 
	1. C4 EVT: E270/E271/E59/E77
	2. C2 EVT: B21/B24/B25/B27
	3. C2 EVT: ES: B41/B44/B45/B47
	4. P3 EVT: I24/I25/I44/I45
	
Bootloader: BOOTLOADER-500-V01.10
A1 SDK: 2.00.39
dev_cap version: V1.2.26
ISP module version: 1.01.62 and A1_ISP: 1.01.62.21
ECM version: v1.0.0.58
Web UI:  V1.01.39
LibHttp: V1.02.02
OpenSSL V1.00.08
LibRtsp V1.00.42
Wan Daemon V1.00.25
Wan Daemon_api V1.00.10
DateTime Daemon V1.00.05
Gsoap library: V6.01.21

[New Features]
	1. Add video resolution options(1440x1080,1280x960) to video stream1 for fisheye cameras.
	
[Bug Fixed]
	1. [internal] fix the B21/B41 5M resolution(OV5653) missing issue.
	2. [Bug 21601] fix the message "Disk type is not ext4->ext3". (RDQ-134)
	3. [Bug 21161, 21643] fix the search loop can't enter the parent index.
	
[Limitation]
    1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
    2. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and
       cause the network to some errors occurred. This case only occurs the the D/N models.
    3. When OSG function is activated, the snapshot always captured image data from channel 1.
    4. FPS number of model I91/I92/I93/I94/I95/I96 is about 27 when the resolution is 1080p.
	5. On the High frame rate mode, the shutter speed might be the 1/100 sec in the 50Hz power line frequency environment. 
	   The image sensor outputs 60 FPS not 50 FPS.
	6. using the audio token with the client PC. the MIC-in can't plug out when active, that may cause the IE crash.
	7. When client PC using IE and receive the audio track of G711 u-law or a-lat. 
		the interval noise "da", "da"... may happen when the active-X play out this audio stream.(MS-filter)

########################################################################
########################################################################
A1D-500-V6.06.08
2014/01/06
Release purpose: For E922/E923 P-stage EVT
	
Bootloader: BOOTLOADER-500-V01.10
A1 SDK: 2.00.39
dev_cap version: V1.2.24
ISP module version: 1.01.61 and A1_ISP: 1.01.61.21
ECM version: v1.0.0.58
Web UI:  V1.01.38
LibHttp: V1.02.02
OpenSSL V1.00.08
LibRtsp V1.00.42
Wan Daemon V1.00.25
Wan Daemon_api V1.00.10
DateTime Daemon V1.00.05
Gsoap library: V6.01.21

[Limitation]
    1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
    2. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and
       cause the network to some errors occurred. This case only occurs the the D/N models.
    3. When OSG function is activated, the snapshot always captured image data from channel 1.
    4. FPS number of model I91/I92/I93/I94/I95/I96 is about 27 when the resolution is 1080p.
	5. On the High frame rate mode, the shutter speed might be the 1/100 sec in the 50Hz power line frequency environment. 
	   The image sensor outputs 60 FPS not 50 FPS.

########################################################################
########################################################################
A1D-500-V6.06.07
2014/01/03
Release purpose: I51, I71 for sales demo, support DUAL(panorama view), FISHEYE_VIEW mode. 
	
Bootloader: BOOTLOADER-500-V01.10
A1 SDK: 2.00.38
dev_cap version: V1.2.21
ISP module version: 1.01.60 and A1_ISP: 1.01.60.21
ECM version: v1.0.0.58
Web UI:  V1.01.38
LibHttp: V1.02.02
OpenSSL V1.00.08
LibRtsp V1.00.42
Wan Daemon V1.00.25
Wan Daemon_api V1.00.10
DateTime Daemon V1.00.05
Gsoap library: V6.01.21

[New Features]
	1. Add FISHEYE_CEILING_ANGLE, FISHEYE_MINIATURE_CTRL URLs in encoder cgi for high-end fisheye camera.
	
[Modified]
	1. Add the debug message for the NVR recording met with block sticks.
	
[Bug Fixed]
	1. [Bug 19038] E97 MJPEG & Quality=100 cause camera disconnect
	2. [Bug 19029] Motion trigger ULkHv. 
	3. [Bug 21500] Touring function run about 48hr\ఱ.

[Limitation]
    1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
    2. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and
       cause the network to some errors occurred. This case only occurs the the D/N models.
    3. When OSG function is activated, the snapshot always captured image data from channel 1.
    4. FPS number of model I91/I92/I93/I94/I95/I96 is about 27 when the resolution is 1080p.
	5. On the High frame rate mode, the shutter speed might be the 1/100 sec in the 50Hz power line frequency environment. 
	   The image sensor outputs 60 FPS not 50 FPS.

########################################################################
########################################################################
A1D-500-V6.06.06
2013/12/20
Release purpose: For B21 B24 C1 EVT
	
Bootloader: BOOTLOADER-500-V01.10
A1 SDK: 2.00.37
dev_cap version: V1.2.19
ISP module version: 1.01.59 and A1_ISP: 1.01.59.19
ECM version: v1.0.0.58
Web UI:  V1.01.37
LibHttp: V1.02.02
OpenSSL V1.00.08
LibRtsp V1.00.39
Wan Daemon V1.00.25
Wan Daemon_api V1.00.10
DateTime Daemon V1.00.05
Gsoap library: V6.01.14

[Buglist]
	1. 21158	[AE report] ϥuservsnapshot,xsɷ|Lkw
	2. 21315	[DVT][E97] Resolution change to 3648x2736 cause can't edit privacy mask

[Modify]
	1. modify kernal for EVT test failed of Power Led.

[Limitation]
    1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
    2. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and
       cause the network to some errors occurred. This case only occurs the the D/N models.
    3. When OSG function is activated, the snapshot always captured image data from channel 1.
    4. FPS number of model I91/I92/I93/I94/I95/I96 is about 27 when the resolution is 1080p.
    5. On the High frame rate mode, the shutter speed might be the 1/100 sec in the 50Hz power line frequency environment. 
	   The image sensor outputs 60 FPS not 50 FPS.
########################################################################
########################################################################
A1D-500-V6.06.05
2013/12/09
Release purpose: For B41, B44, B45, B47 C2 EVT
	
Bootloader: BOOTLOADER-500-V01.10
A1 SDK: 2.00.35
dev_cap version: V1.2.18
ISP module version: 1.01.58 and A1_ISP: 1.01.58.19
ECM version: v1.0.0.57
Web UI:  V1.01.32
LibHttp: V1.02.02
OpenSSL V1.00.08
LibRtsp V1.00.39
Wan Daemon V1.00.25
Wan Daemon_api V1.00.10
DateTime Daemon V1.00.05
Gsoap library: V6.01.14

[Bug Fixed]
	1	20997	[EVT] E610 default mirror/flipT
	2	21041	[EVT] B25 default mirror/flipT
	3	21064	Digital zoom options=enable , after save & reboot digital zoom function fail
	4	21066	[PTZ sample]PelcoP on PTZ sample "R,U,L,D" orientation , the speed to fast.

[Limitation]
    1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
    2. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and
       cause the network to some errors occurred. This case only occurs the the D/N models.
    3. When OSG function is activated, the snapshot always captured image data from channel 1.
    4. FPS number of model I91/I92/I93/I94/I95/I96 is about 27 when the resolution is 1080p.
    5. On the High frame rate mode, the shutter speed might be the 1/100 sec in the 50Hz power line frequency environment. 
	   The image sensor outputs 60 FPS not 50 FPS.
########################################################################
########################################################################
A1D-500-V6.06.04
2013/12/06
	
Bootloader: BOOTLOADER-500-V01.10
A1 SDK: 2.00.35
dev_cap version: V1.2.18
ISP module version: 1.01.57 and A1_ISP: 1.01.58.19
ECM version: v1.0.0.57
Web UI:  V1.01.32
LibHttp: V1.02.02
OpenSSL V1.00.08
LibRtsp V1.00.39
Wan Daemon V1.00.25
Wan Daemon_api V1.00.10
DateTime Daemon V1.00.05
Gsoap library: V6.01.14

[Limitation]
    1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
    2. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and
       cause the network to some errors occurred. This case only occurs the the D/N models.
    3. When OSG function is activated, the snapshot always captured image data from channel 1.
    4. FPS number of model I91/I92/I93/I94/I95/I96 is about 27 when the resolution is 1080p.
    5. On the High frame rate mode, the shutter speed might be the 1/100 sec in the 50Hz power line frequency environment. 
	   The image sensor outputs 60 FPS not 50 FPS.
########################################################################
########################################################################
A1D-500-V6.06.03
2013/11/29
Release purpose: E14, E95 EVT
	
Bootloader: BOOTLOADER-500-V01.10
A1 SDK: 2.00.35
dev_cap version: V1.2.16
ISP module version: 1.01.56 and A1_ISP: 1.01.56.17
ECM version: v1.0.0.57
Web UI:  V1.01.29
LibHttp: V1.02.02
OpenSSL V1.00.08
LibRtsp V1.00.39
Wan Daemon V1.00.25
Wan Daemon_api V1.00.10
DateTime Daemon V1.00.05
Gsoap library: V6.01.14

[New Feature]
	1. New function added: Scan is available for Speed Dome/PTZ cameras.

[Bug Fixed]
	1. Correcting the N3648x2160 Resolution index.
	2. 	20876	 Bit rate setting didn't work in Web.configurator
	3. 	20952 	SpecWAddrd1~223AĳNUIWAddr0&224~255Ȳ

[Limitation]
    1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
    2. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and
       cause the network to some errors occurred. This case only occurs the the D/N models.
    3. When OSG function is activated, the snapshot always captured image data from channel 1.
    4. FPS number of model I91/I92/I93/I94/I95/I96 is about 27 when the resolution is 1080p.
	5. On the High frame rate mode, the shutter speed might be the 1/100 sec in the 50Hz power line frequency environment. 
	   The image sensor outputs 60 FPS not 50 FPS.
########################################################################
########################################################################
A1D-500-V6.06.02
2013/11/29
Release purpose: Support Onvif V2.4 for IMX122 & AR0310 cameras without Audio function.
	
Bootloader: BOOTLOADER-500-V01.10
A1 SDK: 2.00.35
dev_cap version: V1.2.16
ISP module version: 1.01.56 and A1_ISP: 1.01.56.17
ECM version: v1.0.0.57
Web UI:  V1.01.25
LibHttp: V1.02.02
OpenSSL V1.00.08
LibRtsp V1.00.40
Wan Daemon V1.00.25
Wan Daemon_api V1.00.10
DateTime Daemon V1.00.05
Gsoap library: V6.01.15

[Limitation]
    1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
    2. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and
       cause the network to some errors occurred. This case only occurs the the D/N models.
    3. When OSG function is activated, the snapshot always captured image data from channel 1.
    4. FPS number of model I91/I92/I93/I94/I95/I96 is about 27 when the resolution is 1080p.
    5. On the High frame rate mode, the shutter speed might be the 1/100 sec in the 50Hz power line frequency environment. 
	   The image sensor outputs 60 FPS not 50 FPS.

########################################################################
########################################################################
A1D-500-V6.06.01
2013/11/15
Release purpose: I61,I81, I84, I85 for P3 EVT
	
Bootloader: BOOTLOADER-500-V01.10
A1 SDK: 2.00.35
dev_cap version: V1.2.15
ISP module version: 1.01.54 and A1_ISP: 1.01.54.15
ECM version: v1.0.0.55
Web UI:  V1.01.21
LibHttp: V1.02.02
OpenSSL V1.00.08
LibRtsp V1.00.39
Wan Daemon V1.00.25
Wan Daemon_api V1.00.10
DateTime Daemon V1.00.05
Gsoap library: V6.01.14

[New Feature]
	1. Support Adaptive IR-LED power control. (B51/B52/B53/E89/E610)

[Bug Fixed]
	1. [Bug 20722] Use URL:http://ip:port/cgi-bin/encoder?USER=admin&PWD=123456&PTZ_CAP_GETAIE Return:PTZ_CAP='OZ,DZ,PT,AS'
	2. [Bug 20713] Motion triggerNMotion DisableAEnableAMotion Lktrigger(Activity WindowWL]wThreshold)
	3. [Bug 20721] B81 test zoom in/out function with PTZ sample v1.2.45.37 can't work
	4. [Bug 20724] B87 to Test GOP I-frame Fail
	5. [Bug 20728] IspV1.00.09AbSystem info  isp device Resource Version C0521-V1.01.00
	6. [Bug 20710] Default Auto-Flip item is diable, but also can be auto flip on limit range
	7. [Bug 20707]  URL PTZ Auto Flip=1 iH\gJI96(Spec i96 didn't support PF) 
 
[Limitation]
    1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
    2. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and
       cause the network to some errors occurred. This case only occurs the the D/N models.
    3. When OSG function is activated, the snapshot always captured image data from channel 1.
    4. FPS number of model I91/I92/I93/I94/I95/I96 is about 27 when the resolution is 1080p.
	5. On the High frame rate mode, the shutter speed might be the 1/100 sec in the 50Hz power line frequency environment. 
	   The image sensor outputs 60 FPS not 50 FPS.
########################################################################
########################################################################
A1D-500-V6.06.00
2013/11/07
Release purpose: B52(C1 EVT), E77/E37/E59(C2 EVT)
	
Bootloader: BOOTLOADER-500-V01.10
A1 SDK: 2.00.35
dev_cap version: V1.2.11
ISP module version: 1.01.51 and A1_ISP: 1.01.51.14
ECM version: v1.0.0.51
Web UI:  V1.01.16
LibHttp: V1.02.02
OpenSSL V1.00.08
LibRtsp V1.00.37
Wan Daemon V1.00.25
Wan Daemon_api V1.00.10
DateTime Daemon V1.00.05
Gsoap library: V6.01.14

[Know-issues]

[Limitation]
    1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
    2. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and
       cause the network to some errors occurred. This case only occurs the the D/N models.
    3. When OSG function is activated, the snapshot always captured image data from channel 1.
    4. FPS number of model I91/I92/I93/I94/I95/I96 is about 27 when the resolution is 1080p.
########################################################################
########################################################################
A1D-500-V6.05.23
2013/12/18

Bootloader: BOOTLOADER-500-V01.10
A1 SDK: 2.00.35
dev_cap version: V1.2.19
ISP module version: 1.01.59 and A1_ISP: 1.01.59.19
ECM version: v1.0.0.57
Web UI:  V1.01.25B
LibHttp: V1.02.02
OpenSSL V1.00.08
LibRtsp V1.00.39
Wan Daemon V1.00.25
Wan Daemon_api V1.00.10
DateTime Daemon V1.00.05
Gsoap library: V6.01.14

[Modified]
	1. Avoid unexpected errors caused by stop, will be added timeout mechanism to protect the case never stopped during touring.
	2. Support IE11
	3. Remove the Mouse PT direction icon from Zoom Only camera.
 
	
[Bug Fixed]
    1   21158	ϥuservsnapshot , xsɷ|Lkw
    2	21284	Web UI LDI/DOBAudioﶵPŦX
    3	21286	[E610] Web devcap doesn't match A1 spec: devcap version & mirror/flip_mode
    4	21288	[E270]Web devcap isn't match A1 spec devcap version


[Limitation]
    1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
    2. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and
       cause the network to some errors occurred. This case only occurs the the D/N models.
    3. When OSG function is activated, the snapshot always captured image data from channel 1.
    4. FPS number of model I91/I92/I93/I94/I95/I96 is about 27 when the resolution is 1080p.
    5. On the High frame rate mode, the shutter speed might be the 1/100 sec in the 50Hz power line frequency environment.
       The image sensor outputs 60 FPS not 50 FPS.
########################################################################
########################################################################
A1D-500-V6.05.22
2013/11/22
	
Bootloader: BOOTLOADER-500-V01.10
A1 SDK: 2.00.35
dev_cap version: V1.2.16
ISP module version: 1.01.56 and A1_ISP: 1.01.56.17
ECM version: v1.0.0.56
Web UI:  V1.01.25
LibHttp: V1.02.02
OpenSSL V1.00.08
LibRtsp V1.00.39
Wan Daemon V1.00.25
Wan Daemon_api V1.00.10
DateTime Daemon V1.00.05
Gsoap library: V6.01.14

[New Feature]
	1. New function added: Zoom Ratio Limit(ISP issue, Temporary Disable on web UI)/Image Stabilization.

[Bug Fixed]
	1	20786	enable High Frame Mode, Camera Options ECM|۰ʧܤ
	2	20787	E66 w]bit rate3M,qju800K,ɭPequality
	3	20859	B87 go preset button doesn't work.
	4	20860	B87 home position function doesn't work.
	5	20861	B61 touring control function doesn't work.
	6	20875	[E97]Default red region WXve when resolution is N2648*2160

[Limitation]
    1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
    2. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and
       cause the network to some errors occurred. This case only occurs the the D/N models.
    3. When OSG function is activated, the snapshot always captured image data from channel 1.
    4. FPS number of model I91/I92/I93/I94/I95/I96 is about 27 when the resolution is 1080p.
	5. On the High frame rate mode, the shutter speed might be the 1/100 sec in the 50Hz power line frequency environment. 
	   The image sensor outputs 60 FPS not 50 FPS.
########################################################################
########################################################################
A1D-500-V6.05.21
2013/11/04
	
Bootloader: BOOTLOADER-500-V01.10
A1 SDK: 2.00.35
dev_cap version: V1.2.11
ISP module version: 1.01.50 and A1_ISP: 1.01.50.14
ECM version: v1.0.0.51
Web UI:  V1.01.14
LibHttp: V1.02.02
OpenSSL V1.00.08
LibRtsp V1.00.37
Wan Daemon V1.00.25
Wan Daemon_api V1.00.10
DateTime Daemon V1.00.05
Gsoap library: V6.01.14

[New Feature]
	1. High frame rate mode has been implemented. Only support this funtion at the sensor of AR0130.(720P with 60FPS)
	2. Privacy masking Regions share one color group on the C05(C5B)
	
[Bug Fixed]
	1. [Bug 19037] When change stream1 1920x1080 to 2048x1536 cause stream2 1280x720FPSSYɹ諸զX
	2. [Bug 20142] Event start time(ex.06:45),jcameraɶ(ex.14:26), Event|ʧ@
	3. [Bug 20160] Connect A1 camera RTP over TCP or UDP with MJPEG and resolution is 640x360,image display abnormally.
	4. [Bug 17924] ]wH264 & 1fps, VLCLksu,u|bĤ@ie
	5. [Bug 18034] Trigger Interval]60,Trigger Motion, ImageA^Motion,Region|Trigger,Trigger Intervalɶ~|Aʧ@
	6. [Bug 18226] PAP-5100 Soft PoweronoffOFail, D81/D51|X{Lk}{H(Pbug#15083PD)
	7. [Bug 18255] I92/I94/I96 PTɡAOsmoothAɷ|ɽĪ{H(U)
	8. [Bug 18258] I92/I94/I96 Mouse PTZW3qt׳tפT
	9. [Bug 18262] I94/I96 DI/OҤWork
	10. [Bug 18353] Stream 2 change to 320x240, click Zoom out cause live preview windows change to 640x480
	11. [Bug 18771] E32ϥNVRv,|_{H
	12. [Bug 18955] Open 2 IE windows, On camera setting change mount type cause another IE preivew
	13. [Bug 19038] E97 MJPEG & Quality=100 cause camera disconnect
	14. [Bug 19217] Ceillont mount on ePTZ mode , HyOҽk,Zoom in Tele, Quality is bad
	15. [Bug 19629] [I91/I92]PTZ can't work
	16. [Bug 19827] B52 resolution 3648x2736, UI Snapshot fail
	17. [Bug 19833] B52 resolution 3648x2736, N
	18. [Bug 19849] E93 Privacy Mask region 3Lk
	19. [Bug 19941] bH/W Power ON/OFFL{AiJNight ModeĤ@iϤ¡ABbNight ModeҤU|ﴡDay ModeϤAbDay Mode|ﴡNight ModeϤ
	20. [Bug 19945] NDay/NightModeNight ModeA|X{Threshold Bar
	21. [Bug 19946] Day night mode change day or night pop error message
	22. [Bug 19948] Live preview פP, shutter  mode
	23. [Bug 19953] [Suggestion]Stream2 640x480 or 320x240 out snapshot ĳHڿXϬD, ݭnX1920x1080
	24. [Bug 20036] I93 pan and tilt speed not work
	25. [Bug 20038] E97 resolution 640x360 can't display in resolution list.
	26. [Bug 20048] Web UI SNMP setting lose " Enabled" prompt wording.
	27. [Bug 20049] Web UI language setting function fail.
	28. [Bug 20079] ePTZ view , Panorama  and fisheye view  lost tooltip of E96
	29. [Bug 20080] Full privacy mask on 2048x1536 live preview cause IE crash
	30. [Bug 20083] Set up Event ListAUApply|X{ SCH messageAB]wȤ|ͮ
	31. [Bug 20088] Image file name: J %N_%Y  MApplyAe|@db
	32. [Bug 20089] [UI]Some page lost item(DNS, Upload video/snapshot and event list)
	33. [Bug 20094] B94/B96/B97 PTZ can't work
	34. [Bug 20196] Use mouse PTZ control then mouse control icon } preview , PTZ can't receive Stop O,cause can't stop auto scan
	35. [Bug 20204] [ECM]Open PTZ panel then enter to setup mode -> repeat server time IE pop error scrip message.
	36. [Bug 20206] I91 Web UI setting to manual mode, F-Number of IRIS control will disappear.
	37. [Bug 20209] I91 PTZ control panel lose PF(Auto-Flip) ,DZ(Digital Zoom) ,PTZ Vendor/Protocol items.
	38. [Bug 20217] Touring control didn't deleted the preset point when deleted preset point, tour 1 still run the deleted preset point.
	39. [Bug 19859] B59 resolution 3648x2736, viJTrouble Shooting Page (fail rate1/10)
	40. [Bug 20457] Use URL Command: http://192.168.0.100/cgi-bin/80503736?OEMAoem_null_oeminfo.tgz ->ApplyAIE Return:ERROR: oem image.
	41. [Bug 20474] B64 touring control function can't work. 
	42. [Bug 20475] B64 home position function can't work.
	43. [Bug 18223] Use PAP-BootTester to test Hardware Power On/Off  200 times cause the Web UI enter to troubleshooting page.
	45. [Bug 18224] E46 HW Power on offFail,X{ Trouble Shooting
	
	46. [Bug 13172] [Frame Check]զXbPAP-5100 & FrameCheckerX{Frame rateBFail GOP out of 1s~T
	47. [Bug 14042]	ϥVLCRTP over multicast stream1elag Y
	48. [Bug 14050]	Activity motion SFTriggerI,motion Trigger
	49. [Bug 14084] Exposure Mode]Manual, Shutter Speed]1/5,LkϥSnapshot, Exposure Mode]Auto,æbLow Light,]|D	
	50. [Bug 14085]	1920x1080, Motion Trigger, RegionPECMPB
	51. [Bug 14807]	IE9 (64줸)LkwECM
	52. [Bug 15748]	1920x1080 or 2048x1536 full screen, preview has latency
	53. [Bug 16849]	Use scroll bar to control up/down=>some area appear mosaic of live preview
	54. [Bug 16968]	Resolution2048x1536ը1280x720,Apply,IE|HLogout
	55. [Bug 16969]	Resolution2048x1536ը1280x720,Apply,FWi|oReboot
	56. [Bug 16976]	Play Convert RAW to AVI file or NVR export AVI file,the video|X{y.
	57. [Bug 17070]	Frame rate:1 to switch resolution, sometime motion region disappeared in Motion detection setup page.
	58. [Bug 17196]	Resolution1280x720ը640x48,Apply,IE|۰
	59. [Bug 17401]	From 1280x960 change to 640x 480 yPrivacy mask AEnable privacy mask again => Pop invalid setting message
	60. [Bug 17473]	SD Card FormatAb٨SUClose Buttome ,WEB UISܤϦ
	61. [Bug 18218]	[UI] IP Address Filtering options didn't align the line
	62. [Bug 18257]	I92/I94/I96 IE10 Mouse PTZW/U//k/Zoom in/ Zoom outФ|ܥX
	63. [Bug 18260]	I94 Save Reboot testAI94@iJtrouble shooting mode
	64. [Bug 18261]	I96 Stream1 1920X1080 & Stream2 1280X720uRX4 FPSAspec30 FPS & 5 FPS
	65. [Bug 18354]	WDR bSave & reboot ebtGttZ
	66. [Bug 18585]	E42A վ stream2 resolutionɭԷ|IEθ{H
	67. [Bug 18595]	Use OS Win8+IE10 AWEB UI ﶵܤϥիoܬ¦
	68. [Bug 18599]	Use PAP5100 Test B2 Check Fail
	69. [Bug 18600]	Use PAP5100 Test Frame Check & GOP Check FailABLive VeweŦ
	70. [Bug 18757]	Resolution=2592x1944 , Exacq tool use ONVIF connect cause live preview `
	71. [Bug 18944]	E42 auto switch to Night,Camera lose link
	72. [Bug 19037]	When change stream1 1920x1080 to 2048x1536 cause stream2 1280x720FPSSYɹ諸զX
	73. [Bug 19937]	B54 Devcap version is different with devcap Specification.
	74. [Bug 19952]	Change Shutter speed or Day_Night change enter to troubleshooting
	75. [Bug 19999]	Video colorⰾ when camera with MJPEG + RTP
	76. [Bug 20051]	E96 from default setting change to flipping/mirroring will cause live page appear vignetting(Use the same IE to switch).
	77. [Bug 20142]	Event start time(ex.06:45),jcameraɶ(ex.14:26), Event|ʧ@
	78. [Bug 20160]	Connect A1 camera RTP over TCP or UDP with MJPEG and resolution is 640x360,image display abnormally.
	79. [Bug 20201]	Change auto pan/tilt speed enable -> disable then back to enable => 1X speed different with before status.
	80. [Bug 20202]	First invoked PTZ panel, use mouse control, mouse ʤV, Mouse icon l׬O̺Ct׽bY
	81. [Bug 20458]	B87 HW Power on off b500iϤX{@iϤVideo Flipping/Video MirroringDisableΡC
	82. [Bug 20468]	Change Stream cause Live preview lost mouse PTZ control
	84. [Bug 20479]	B61/B81 brightness result after save & reboot is not correct.
	85. [Bug 20480]	UI PTZ ֤FVender & Address
	86. [Bug 20481]	B6x/8x Mouse PTZ hWUk,4ӤV
	

[Limitation]
    1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
    2. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and
       cause the network to some errors occurred. This case only occurs the the D/N models.
    3. When OSG function is activated, the snapshot always captured image data from channel 1.
    4. FPS number of model I91/I92/I93/I94/I95/I96 is about 27 when the resolution is 1080p.
########################################################################
########################################################################
A1D-500-V6.05.20
2013/10/24
Release purpose:
For C1 EVT: E47, E68, E88
	
Bootloader: BOOTLOADER-500-V01.08
A1 SDK: 2.00.34
dev_cap version: V1.2.09
ISP module version: 1.01.50 and A1_ISP: 1.01.50.12
ECM version: v1.0.0.48
Web UI:  V1.01.04
LibHttp: V1.00.37
OpenSSL V1.00.08
LibRtsp V1.00.37
Wan Daemon V1.00.25
Wan Daemon_api V1.00.10
DateTime Daemon V1.00.05
Gsoap library: V6.01.13

[Modified]
	1. Adjust the snapshot architecture to reduce system overhead. Sensor of OV5653 camera can reach to full frame rate at the N2592x1944 resolution.

[Limitation]
    1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
    2. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and
       cause the network to some errors occurred. This case only occurs the the D/N models.
    3. When OSG function is activated, the snapshot always captured image data from channel 1.
    5. FPS number of model I91/I92/I93/I94/I95/I96 is about 27 when the resolution is 1080p.
########################################################################
########################################################################
A1D-500-V6.05.19
2013/10/14
Release purpose:
For C2 EVT: B51, E57/E58, B95
	
Bootloader: BOOTLOADER-500-V01.08
A1 SDK: 2.00.34
dev_cap version: V1.2.07
ISP module version: 1.01.49 and A1_ISP: 1.01.49.10
ECM version: v1.0.0.48
Web UI:  V1.01.04
LibHttp: V1.00.37
OpenSSL V1.00.08
LibRtsp V1.00.37
Wan Daemon V1.00.25
Wan Daemon_api V1.00.10
DateTime Daemon V1.00.05
Gsoap library: V6.01.13

[Bug fixed]
    1.Fixed the Record index didn't equal Record Number in the current work folder and subDB after remount.
    2.Fixed the segmentation fault after remove the folder and node in the middle of link list tree.
	
[LibRtsp Fixed]
	1.Sony Xarina MJpeg video frames utilized mutal merger quantitation tables, LibRtsp has difficulty to parsing it, so I modified.

[New Function]
	1. Add PT_ERROR_IN_STEPS URL in test cgi
	2. Use the named pipe to replace the standard system call 'system'.

[Know-issues]
       1. Panorama view(DUAL mode) of 5M(2592x1944) resolution not ready yet.
       2. B41, B47, B21			
           a. DI/Do Fail		
           b. Using Panel or Mouse to click Zoom In/Out frequencly causes Refoceus failed and Zoom In/Out function failed
           c. Click stepped zooming frequencly of Panel causes IE crash				
      3.B21LPT\oX{PTﶵ		

[Limitation]
    1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
    2. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and
       cause the network to some errors occurred. This case only occurs the the D/N models.
    3. When OSG function is activated, the snapshot always captured image data from channel 1.
    4. Sometimes the FPS is running less then 15 when the video resolution is N2592x1944 of OV5653(5M).
    5. FPS number of model I91/I92/I93/I94/I95/I96 is about 27 when the resolution is 1080p.
########################################################################
########################################################################
A1D-500-V6.05.18
2013/10/11
Release purpose: 
For I91,I92,I93,I94,I95,I96 C3 EVT (Items:Touring, Preset Point, PTZ commands, and PT_ERROR_IN_STEPS)
For B27 P3 EVT test
For E47 E56 E68 E88 B44 B45 C1 EVT test
For B94 B96 B97
    D21FA D21VA E21FA E21VA D22FA D22VA E22FA E22VA
    E23A E24A E25A
    D41A E41B D42A E42B
    E43B E44A E45A E46A
    D61A D62A D64A D65A E61A E62A E63A E64A E65A E66A E67A
    D71A D72A E71A E72A E73A E74A
    D81A D82A E81A E82A E83A E84A E85A E86A
    B65 B85 E75 E76 C2 EVT test
	
Bootloader: BOOTLOADER-500-V01.08
A1 SDK: 2.00.34
dev_cap version: V1.2.07
ISP module version: 1.01.48 and A1_ISP: 1.01.48.10
ECM version: v1.0.0.48
Web UI:  V1.01.04
LibHttp: V1.00.37
OpenSSL V1.00.08
LibRtsp V1.00.37
Wan Daemon V1.00.25
Wan Daemon_api V1.00.10
DateTime Daemon V1.00.05
Gsoap library: V6.01.13

[Bug fixed]
    1.Fixed the Record index didn't equal Record Number in the current work folder and subDB after remount.
    2.Fixed the segmentation fault after remove the folder and node in the middle of link list tree.
	
[LibRtsp Fixed]
	1.Sony Xarina MJpeg video frames utilized mutal merger quantitation tables, LibRtsp has difficulty to parsing it, so I modified.

[New Function]
	1. Add PT_ERROR_IN_STEPS URL in test cgi
	2. Use the named pipe to replace the standard system call 'system'.

[Know-issues]
       1. Panorama view(DUAL mode) of 5M(2592x1944) resolution not ready yet.
       2. B41, B47, B21			
           a. DI/Do Fail		
           b. Using Panel or Mouse to click Zoom In/Out frequencly causes Refoceus failed and Zoom In/Out function failed
           c. Click stepped zooming frequencly of Panel causes IE crash				
      3.B21LPT\oX{PTﶵ		

[Limitation]
    1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
    2. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and
       cause the network to some errors occurred. This case only occurs the the D/N models.
    3. When OSG function is activated, the snapshot always captured image data from channel 1.
    4. Sometimes the FPS is running less then 15 when the video resolution is N2592x1944 of OV5653(5M).
    5. FPS number of model I91/I92/I93/I94/I95/I96 is about 27 when the resolution is 1080p.
########################################################################
########################################################################
A1D-500-V6.05.17
2013/10/09
Release purpose: SBA for CHD20130718000014, only update ISP module to v1.01.48 base on V6.05.16 firmware.

Bootloader: BOOTLOADER-500-V01.07
A1 SDK: 2.00.33
dev_cap version: V1.2.05
ISP module version: 1.01.48 and A1_ISP: 1.01.48.09
ECM version: v1.0.0.43
Web UI:  V1.01.01
LibHttp: V1.00.37
OpenSSL V1.00.08
LibRtsp V1.00.37
Wan Daemon V1.00.25
Wan Daemon_api V1.00.10
DateTime Daemon V1.00.05
Gsoap library: V6.01.13

[Bug fixed]
    1. Fixing Day/Night or Shutter change cause video get no Frame. 

[Know-issues]
       1. Panorama view(DUAL mode) of 5M(2592x1944) resolution not ready yet.
       2. B41, B47, B21			
           a. DI/Do Fail		
           b. Using Panel or Mouse to click Zoom In/Out frequencly causes Refoceus failed and Zoom In/Out function failed
           c. Click stepped zooming frequencly of Panel causes IE crash				
      3.B21LPT\oX{PTﶵ	

[Limitation]
    1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
    2. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and
       cause the network to some errors occurred. This case only occurs the the D/N models.
    3. When OSG function is activated, the snapshot always captured image data from channel 1.
    4. Sometimes the FPS is running less then 15 when the video resolution is N2592x1944 of OV5653(5M).
    5. FPS number of model I91/I92/I93/I94/I95/I96 is about 27 when the resolution is 1080p.
########################################################################
########################################################################
A1D-500-V6.05.16
2013/10/03
Release purpose: Fixing Day/Night or Shutter change cause video get no Frame.

Bootloader: BOOTLOADER-500-V01.08
A1 SDK: 2.00.33
dev_cap version: V1.2.05
ISP module version: 1.01.45 and A1_ISP: 1.01.45.08
ECM version: v1.0.0.46
Web UI:  V1.01.02
LibHttp: V1.00.37
OpenSSL V1.00.08
LibRtsp V1.00.37
Wan Daemon V1.00.25
Wan Daemon_api V1.00.10
DateTime Daemon V1.00.05
Gsoap library: V6.01.13

[Bug fixed]
    1. Fixing Day/Night or Shutter change cause video get no Frame. 

[Know-issues]
       1. Panorama view(DUAL mode) of 5M(2592x1944) resolution not ready yet.
       2. B41, B47, B21			
           a. DI/Do Fail		
           b. Using Panel or Mouse to click Zoom In/Out frequencly causes Refoceus failed and Zoom In/Out function failed
           c. Click stepped zooming frequencly of Panel causes IE crash				
      3.B21LPT\oX{PTﶵ		

[Limitation]
    1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
    2. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and
       cause the network to some errors occurred. This case only occurs the the D/N models.
    3. When OSG function is activated, the snapshot always captured image data from channel 1.
    4. Sometimes the FPS is running less then 15 when the video resolution is N2592x1944 of OV5653(5M).
    5. FPS number of model I91/I92/I93/I94/I95/I96 is about 27 when the resolution is 1080p.
########################################################################
########################################################################
A1D-500-V6.05.15
2013/10/01
Release purpose: 
	For E96,E97,B54,B55,B56 ES
	For I51/I71 P3 EVT with C2B ISP V1.00.03
	EVT testing: B95,B41,B47,B21,B54,B55,B56

Bootloader: BOOTLOADER-500-V01.07
A1 SDK: 2.00.33
dev_cap version: V1.2.05
ISP module version: 1.01.45 and A1_ISP: 1.01.45.08
ECM version: v1.0.0.46
Web UI:  V1.01.02
LibHttp: V1.00.37
OpenSSL V1.00.08
LibRtsp V1.00.37
Wan Daemon V1.00.25
Wan Daemon_api V1.00.10
DateTime Daemon V1.00.05
Gsoap library: V6.01.13

[New Function]
	1. WebUI Add FISH_IMAGE_CENTER Function 
	2. WebUI Camera Option page

[Know-issues]
       1. Panorama view(DUAL mode) of 5M(2592x1944) resolution not ready yet.
       2. B41, B47, B21			
           a. DI/Do Fail		
           b. Using Panel or Mouse to click Zoom In/Out frequencly causes Refoceus failed and Zoom In/Out function failed
           c. Click stepped zooming frequencly of Panel causes IE crash				
      3.B21LPT\oX{PTﶵ		

[Limitation]
    1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
    2. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and
       cause the network to some errors occurred. This case only occurs the the D/N models.
    3. When OSG function is activated, the snapshot always captured image data from channel 1.
    4. Sometimes the FPS is running less then 15 when the video resolution is N2592x1944 of OV5653(5M).
    5. FPS number of model I91/I92/I93/I94/I95/I96 is about 27 when the resolution is 1080p.
########################################################################
########################################################################
A1D-500-V6.05.14
2013/09/23
Release purpose: EVT testing: I51/I71

Bootloader: BOOTLOADER-500-V01.07
A1 SDK: 2.00.33
dev_cap version: V1.2.04
ISP module version: 1.01.45 and A1_ISP: 1.01.45.08
ECM version: v1.0.0.43
Web UI:  V1.01.01
LibHttp: V1.00.37
OpenSSL V1.00.08
LibRtsp V1.00.37
Wan Daemon V1.00.25
Wan Daemon_api V1.00.10
DateTime Daemon V1.00.05
Gsoap library: V6.01.13

[Bug fixed]
	1. file naming rule tuning for upload to ftp.
	
[Know-issues]
	1. Panorama view(DUAL mode) of 5M(2592x1944) resolution not ready yet.

[Limitation]
    1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
    2. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and
       cause the network to some errors occurred. This case only occurs the the D/N models.
    3. When OSG function is activated, the snapshot always captured image data from channel 1.
    4. Sometimes the FPS is running less then 15 when the video resolution is N2592x1944 of OV5653(5M).
    5. FPS number of model I91/I92/I93/I94/I95/I96 is about 27 when the resolution is 1080p.
########################################################################
########################################################################
A1D-500-V6.05.13
2013/09/23
Release purpose: EVT testing: B57/B71

Bootloader: BOOTLOADER-500-V01.07
A1 SDK: 2.00.32
dev_cap version: V1.2.03
ISP module version: 1.01.44 and A1_ISP: 1.01.44.08
ECM version: v1.0.0.43
Web UI:  V1.01.01
LibHttp: V1.00.37
OpenSSL V1.00.08
LibRtsp V1.00.37
Wan Daemon V1.00.25
Wan Daemon_api V1.00.10
DateTime Daemon V1.00.05
Gsoap library: V6.01.13

[New Feature]
	1. Add VIDEO_STREAM URL in encoder cgi, and support DUAL, FISHEYE_VIEW mode for high-end fisheye camera.

[Know-issues]
	1. Panorama view(DUAL mode) of 5M(2592x1944) resolution not ready yet.

[Limitation]
    1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
    2. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and
       cause the network to some errors occurred. This case only occurs the the D/N models.
    3. When OSG function is activated, the snapshot always captured image data from channel 1.
    4. Sometimes the FPS is running less then 15 when the video resolution is N2592x1944 of OV5653(5M).
    5. FPS number of model I91/I92/I93/I94/I95/I96 is about 27 when the resolution is 1080p.
########################################################################
########################################################################
A1D-500-V6.05.12
2013/09/18

This is a SBA firmware to resolve the SHD complaint.

Bootloader: BOOTLOADER-500-V01.07
A1 SDK: 2.00.31
dev_cap version: V1.2.02
ISP module version: 1.01.43 and A1_ISP: 1.01.43.08
ECM version: v1.0.0.43
Web UI:  V1.01.01
LibHttp: V1.00.37
OpenSSL V1.00.08
LibRtsp V1.00.37
Wan Daemon V1.00.25
Wan Daemon_api V1.00.10
DateTime Daemon V1.00.05
Gsoap library: V6.01.13
########################################################################
########################################################################
A1D-500-V6.05.11
2013/09/17
Release purpose: EVT testing: B24/B44, B67/B87, B61/B81, B64/B84, I93/I94/I95/I96

Bootloader: BOOTLOADER-500-V01.07
A1 SDK: 2.00.31
dev_cap version: V1.2.02
ISP module version: 1.01.42 and A1_ISP: 1.01.42.08
ECM version: v1.0.0.43
Web UI:  V1.01.01
LibHttp: V1.00.37
OpenSSL V1.00.08
LibRtsp V1.00.37
Wan Daemon V1.00.25
Wan Daemon_api V1.00.10
DateTime Daemon V1.00.05
Gsoap library: V6.01.13

[New Feature]
	1. Add VIDEO_STREAM URL in encoder cgi, and support DUAL, FISHEYE_VIEW mode for high-end fisheye camera.
	2. ADD ISP_FIRMWARE, ISP_DEV, ISP_HARDWARE URLs in Update cgi.

[Know-issues]
	1. Panorama view(DUAL mode) of 5M(2592x1944) resolution not ready yet.
	
[Limitation]
    1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
    2. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and
       cause the network to some errors occurred. This case only occurs the the D/N models.
    3. When OSG function is activated, the snapshot always captured image data from channel 1.
    4. Sometimes the FPS is running less then 15 when the video resolution is N2592x1944 of OV5653(5M).
    5. FPS number of model I91/I92/I93/I94/I95/I96 is about 27 when the resolution is 1080p.
########################################################################
########################################################################
A1D-500-V6.05.10
2013/09/09
Release purpose: EVT testing: E75/E76, B24/B44, I91/I92, E56/E57/E58, E35/E36, B57/B71

Bootloader: BOOTLOADER-500-V01.07
A1 SDK: 2.00.30
dev_cap version: V1.1.48
ISP module version: 1.01.41 and A1_ISP: 1.01.41.08
ECM version: v1.0.0.43
Web UI:  V1.00.38
LibHttp: V1.00.37
OpenSSL V1.00.08
LibRtsp V1.00.36
Wan Daemon V1.00.25
Wan Daemon_api V1.00.10
DateTime Daemon V1.00.05
Gsoap library: V6.01.13

[New Feature]
	1. Add FISHEYE_IMAGE_CENTER URL in encoder cgi.
	2. Serial hex command via encoder cgi(SERIAL_HEX URL) to ISP parser has been implemented.

[Modified]
	1. Order to keep a good constant bit rate, the frame data will be duplicated when get the pause signal.
	
[Limitation]
    1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
    2. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and
       cause the network to some errors occurred. This case only occurs the the D/N models.
    3. When OSG function is activated, the snapshot always captured image data from channel 1.
    4. Sometimes the FPS is running less then 15 when the video resolution is N2592x1944 of OV5653(5M).
    5. FPS number of model I91/I92/I93/I94/I95/I96 is about 27 when the resolution is 1080p.
########################################################################
########################################################################
A1D-500-V6.05.09
2013/09/05

This is a SBA firmware. For fixing out Night mode issue.

Bootloader: BOOTLOADER-500-V01.07
A1 SDK: 2.00.30
dev_cap version: V1.1.47
ISP module version: 1.01.40 and A1_ISP: 1.01.40.06
ECM version: v1.0.0.43
Web UI:  V1.00.38
LibHttp: V1.00.37
OpenSSL V1.00.08
LibRtsp V1.00.35
Wan Daemon V1.00.25
Wan Daemon_api V1.00.10
DateTime Daemon V1.00.05
Gsoap library: V6.01.13

########################################################################
########################################################################
A1D-500-V6.05.08
2013/09/02
Release purpose: EVT testing: B54/B55/B56,E89

Bootloader: BOOTLOADER-500-V01.07
A1 SDK: 2.00.30
dev_cap version: V1.1.47
ISP module version: 1.01.39 and A1_ISP: 1.01.39.06
ECM version: v1.0.0.43
Web UI:  V1.00.38
LibHttp: V1.00.37
OpenSSL V1.00.08
LibRtsp V1.00.35
Wan Daemon V1.00.25
Wan Daemon_api V1.00.10
DateTime Daemon V1.00.05
Gsoap library: V6.01.13

[New Feature]
	1. Serial hex command (from control port) to ISP parser has been implemented.

[Limitation]
    1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
    2. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and
       cause the network to some errors occurred. This case only occurs the the D/N models.
    3. When OSG function is activated, the snapshot always captured image data from channel 1.
    4. Sometimes the FPS is running less then 15 when the video resolution is N2592x1944 of OV5653(5M).
    5. FPS number of model I91/I92/I93/I94/I95/I96 is about 27 when the resolution is 1080p.
########################################################################
########################################################################
A1D-500-V6.05.07
2013/08/26
Release purpose: EVT testing: B45/B25/E14/B65/B85

Bootloader: BOOTLOADER-500-V01.07
A1 SDK: 2.00.30
dev_cap version: V1.1.43
ISP module version: 1.01.36 and A1_ISP: 1.01.36.05
ECM version: v1.0.0.42
Web UI:  V1.00.34
LibHttp: V1.00.37
OpenSSL V1.00.08
LibRtsp V1.00.33
Wan Daemon V1.00.25
Wan Daemon_api V1.00.10
DateTime Daemon V1.00.05
Gsoap library: V6.01.13

[Limitation]
    1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
    2. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and
       cause the network to some errors occurred. This case only occurs the the D/N models.
    3. When OSG function is activated, the snapshot always captured image data from channel 1.
    4. Sometimes the FPS is running less then 15 when the video resolution is N2592x1944 of OV5653(5M).
    5. FPS number of model I91/I92/I93/I94/I95/I96 is about 27 when the resolution is 1080p.
########################################################################
########################################################################
A1D-500-V6.05.06
2013/08/19
Release purpose: EVT testing: B51/B52/B53, B21/B41

Bootloader: BOOTLOADER-500-V01.07
A1 SDK: 2.00.30
dev_cap version: V1.1.43
ISP module version: 1.01.35 and A1_ISP: 1.01.35.05
ECM version: v1.0.0.40
Web UI:  V1.00.32
LibHttp: V1.00.37
OpenSSL V1.00.08
LibRtsp V1.00.33
Wan Daemon V1.00.25
Wan Daemon_api V1.00.10
DateTime Daemon V1.00.05
Gsoap library: V6.01.13

[Limitation]
    1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
    2. On the platform A1, the H.264 encoding out of the video stream is high profile cause can't be played in the QuickTime.
    3. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and
       cause the network to some errors occurred. This case only occurs the the D/N models.
    4. When OSG function is activated, the snapshot always captured image data from channel 1.
    5. Sometimes the FPS is running less then 15 when the video resolution is N2592x1944 of OV5653(5M).
    6. FPS number of model I91/I92/I93/I94/I95/I96 is about 27 when the resolution is 1080p.
########################################################################
########################################################################
A1D-500-V6.05.05
2013/08/05
Release purpose: EVT testing: B67/B87

Bootloader: BOOTLOADER-500-V01.07
A1 SDK: 2.00.30
dev_cap version: V1.1.42
ISP module version: 1.01.33 and A1_ISP: 1.01.33.05
ECM version: v1.0.0.36
Web UI:  V1.00.28
LibHttp: V1.00.35
OpenSSL V1.00.08
LibRtsp V1.00.29
Wan Daemon V1.00.24
Wan Daemon_api V1.00.09
DateTime Daemon V1.00.05
Gsoap library: V6.01.13

[Modified]
	1. Extend the snapshot buffer length from 3M to 5M. (sensor of MT9J003 needs more buffer)

[Limitation]
    1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
    2. On the platform A1, the H.264 encoding out of the video stream is high profile cause can't be played in the QuickTime.
    3. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and
       cause the network to some errors occurred. This case only occurs the the D/N models.
    4. When OSG function is activated, the snapshot always captured image data from channel 1.
    5. Sometimes the FPS is running less then 15 when the video resolution is N2592x1944 of OV5653(5M).
########################################################################
########################################################################
A1D-500-V6.05.04
2013/07/29
Release purpose: EVT testing: B51,B53,B55,E68/E69/E88,E97,B61/B81,E47


Bootloader: BOOTLOADER-500-V01.07
A1 SDK: 2.00.30
dev_cap version: V1.1.41
ISP module version: 1.01.32 and A1_ISP: 1.01.32.05
ECM version: v1.0.0.36
Web UI:  V1.00.28
LibHttp: V1.00.35
OpenSSL V1.00.08
LibRtsp V1.00.29
Wan Daemon V1.00.24
Wan Daemon_api V1.00.09
DateTime Daemon V1.00.05
Gsoap library: V6.01.13

[Limitation]
    1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
    2. On the platform A1, the H.264 encoding out of the video stream is high profile cause can't be played in the QuickTime.
    3. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and
       cause the network to some errors occurred. This case only occurs the the D/N models.
    4. When OSG function is activated, the snapshot always captured image data from channel 1.
    5. Sometimes the FPS is running less then 15 when the video resolution is N2592x1944 of OV5653(5M).
########################################################################
########################################################################
A1D-500-V6.05.03
2013/07/19
Release purpose: 1. EVT testing: E94,E95,E97

Bootloader: BOOTLOADER-500-V01.07
A1 SDK: 2.00.29
dev_cap version: V1.1.40
ISP module version: 1.01.31 and A1_ISP: 1.01.31.04
ECM version: v1.0.0.35
Web UI:  V1.00.26
LibHttp: V1.00.35
OpenSSL V1.00.08
LibRtsp V1.00.29
Wan Daemon V1.00.22
Wan Daemon_api V1.00.08
DateTime Daemon V1.00.05
Gsoap library: V6.01.11

[Bug fixed]
	1. video is black when MJPEG quality is 91-100.
	2. ECM will crash when user runtime change resolution in the setup image page.

[Limitation]
    1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
    2. On the platform A1, the H.264 encoding out of the video stream is high profile cause can't be played in the QuickTime.
    3. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and
       cause the network to some errors occurred. This case only occurs the the D/N models.
    4. When OSG function is activated, the snapshot always captured image data from channel 1.
    5. FPS number of model I91/I92/I93/I94/I95/I96 is about 27 when the resolution is 1080p.
    5. Sensor of MT9J003(10M) that the FPS running at 23~25 when the video resolution is N1920x1080.

########################################################################
########################################################################
A1D-500-V6.05.02
2013/07/15
Release purpose: 1. EVT testing: E94,E95,E97

Bootloader: BOOTLOADER-500-V01.07
A1 SDK: 2.00.28
dev_cap version: V1.1.40
ISP module version: 1.01.31 and A1_ISP: 1.01.31.04
ECM version: v1.0.0.32
Web UI:  V1.00.24
LibHttp: V1.00.35
OpenSSL V1.00.08
LibRtsp V1.00.29
Wan Daemon V1.00.22
Wan Daemon_api V1.00.08
DateTime Daemon V1.00.05
Gsoap library: V6.01.11

[Limitation]
    1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
    2. On the platform A1, the H.264 encoding out of the video stream is high profile cause can't be played in the QuickTime.
    3. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and
       cause the network to some errors occurred. This case only occurs the the D/N models.
    4. When OSG function is activated, the snapshot always captured image data from channel 1.
    5. FPS number of model I91/I92/I93/I94/I95/I96 is about 27 when the resolution is 1080p.
    5. Sensor of MT9J003(10M) that the FPS running at 23~25 when the video resolution is N1920x1080.

########################################################################
########################################################################
A1D-500-V6.05.01
2013/07/08
Release purpose: 1. EVT testing: B47

Bootloader: BOOTLOADER-500-V01.07
A1 SDK: 2.00.26
dev_cap version: V1.1.37
ISP module version: 1.01.30 and A1_ISP: 1.01.30.04
ECM version: v1.0.0.30
Web UI:  V1.00.23
LibHttp: V1.00.35
OpenSSL V1.00.08
LibRtsp V1.00.29
Wan Daemon V1.00.22
Wan Daemon_api V1.00.08
DateTime Daemon V1.00.05
Gsoap library: V6.01.11

[New Feature]
	1. Support the QVGA(320x240) resolution only for Channel 2.

[Modified]
	1. check mounting disk timeout from 200 msec to 1 sec.

[Limitation]
    1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
    2. On the platform A1, the H.264 encoding out of the video stream is high profile cause can't be played in the QuickTime.
    3. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and
       cause the network to some errors occurred. This case only occurs the the D/N models.
    4. When OSG function is activated, the snapshot always captured image data from channel 1.
    5. FPS number of model I91/I92/I93/I94/I95/I96 is about 27 when the resolution is 1080p.

########################################################################
########################################################################
A1D-500-V6.05.00
2013/07/01
Release purpose: 1. EVT testing: E93, B97, E96

Bootloader: BOOTLOADER-500-V01.07
A1 SDK: 2.00.25
dev_cap version: V1.1.36
ISP module version: 1.01.29 and A1_ISP: 1.01.29.04
ECM version: v1.0.0.30
Web UI:  V1.00.23
LibHttp: V1.00.35
OpenSSL V1.00.08
LibRtsp V1.00.29
Wan Daemon V1.00.22
Wan Daemon_api V1.00.08
DateTime Daemon V1.00.05
Gsoap library: V6.01.11

[Limitation]
    1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
    2. On the platform A1, the H.264 encoding out of the video stream is high profile cause can't be played in the QuickTime.
    3. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and
       cause the network to some errors occurred. This case only occurs the the D/N models.
    4. When OSG function is activated, the snapshot always captured image data from channel 1.
    5. FPS number of model I91/I92/I93/I94/I95/I96 is about 27 when the resolution is 1080p.

########################################################################
########################################################################
A1D-500-V6.04.15
2013/08/27
Release purpose: V6.04 formal

Bootloader: BOOTLOADER-500-V01.07
A1 SDK: 2.00.30
dev_cap version: V1.1.43
ISP module version: 1.01.37 and A1_ISP: 1.01.37.05
ECM version: v1.0.0.43
Web UI:  V1.00.37
LibHttp: V1.00.37
OpenSSL V1.00.08
LibRtsp V1.00.33
Wan Daemon V1.00.25
Wan Daemon_api V1.00.10
DateTime Daemon V1.00.05
Gsoap library: V6.01.13

[Modified]
	1. Maximum length of encoder buffer size reduced back to 7MB for MJPEG.
	
[Bug fixed]
	1. [Bug 18953] Executed DISK_FILE_SEARCH_EVENT URL, but URL reply lose some information. 

[Limitation]
    1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
    2. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and
       cause the network to some errors occurred. This case only occurs the the D/N models.
    3. When OSG function is activated, the snapshot always captured image data from channel 1.
    4. Sometimes the FPS is running less then 15 when the video resolution is N2592x1944 of OV5653(5M).
    5. FPS number of model I91/I92/I93/I94/I95/I96 is about 27 when the resolution is 1080p.
########################################################################
########################################################################
A1D-500-V6.04.14
2013/08/15
Release purpose: V6.04 formal and EVT testing: B94/E77/B64/B84/E93/E96

Bootloader: BOOTLOADER-500-V01.07
A1 SDK: 2.00.30
dev_cap version: V1.1.42
ISP module version: 1.01.34 and A1_ISP: 1.01.34.05
ECM version: v1.0.0.40
Web UI:  V1.00.32
LibHttp: V1.00.37
OpenSSL V1.00.08
LibRtsp V1.00.33
Wan Daemon V1.00.25
Wan Daemon_api V1.00.10
DateTime Daemon V1.00.05
Gsoap library: V6.01.13

[Modified]
	1. Adapter H264 level with video resolution.
	   (VGA->V3.0, 1920x1080->V4.0, over 1920x1080->V5.1)
	   
[Bug Fixed]
	1. [Bug 18586] B55 default live preview different with change mount type result 
	2. [Bug 18594] SD Card vɮצ@16(16/16)ӭA䤤4ӭ(2/16~6/16)Lɮ 
	3. [Bug 18603] IR_LED value in the devcap Spec. is different with hardware device. 
	4. [Bug 18588] Open 2 IE windows, On camera setting change mount type cause another IE preivew also keep previous live preivew
	5. [Bug 18589] After change fisheye view mode cause fisheye windows control ذ骺lP
	6. [Bug 18590] Wall mount , steam 1 zoom in to tel then change to stream 2, use mouse to zoom in =>fail
	7. [Bug 18763] There is a "undefined" displayed on error message in Event SMTP Server Configuration
	
[Limitation]
    1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
    2. On the platform A1, the H.264 encoding out of the video stream is high profile cause can't be played in the QuickTime.
    3. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and
       cause the network to some errors occurred. This case only occurs the the D/N models.
    4. When OSG function is activated, the snapshot always captured image data from channel 1.
    5. FPS number of model I91/I92/I93/I94/I95/I96 is about 27 when the resolution is 1080p.
########################################################################
########################################################################
A1D-500-V6.04.13
2013/07/26

Bootloader: BOOTLOADER-500-V01.07
A1 SDK: 2.00.30
dev_cap version: V1.1.40
ISP module version: 1.01.31 and A1_ISP: 1.01.31.05
ECM version: v1.0.0.36
Web UI:  V1.00.27
LibHttp: V1.00.35
OpenSSL V1.00.08
LibRtsp V1.00.29
Wan Daemon V1.00.24
Wan Daemon_api V1.00.09
DateTime Daemon V1.00.05
Gsoap library: V6.01.13

[Bug Fixed]
	1. [Bug 18032] FTP ServerJ"ftp://ip" ,Event trigger,|ytζiJTroubleshooting Page
	2. [Bug 18209] Date Setting set to "Set Manually" , Date: 2025/1/1, but live page show the PC time. 
	3. [Bug 18211] Date Setting set to "SNTP/NTP Server ", DUT-A sync time is error with PC time.
	4. [Bug 17475] PRɮצ URL Command DISK_REMOVE_OLD_FILES Fail 
	5. [Bug 18253] }AI92/I94/I96eOA˪AhImageNMirror & Flip Enable]SΡAeOA˪ 
	6. [Bug 18254] I92/I94/I96 SnapshoteɡAIUӪϥûO}ɪĤ@ӵe 
	7. [Bug 18256] I92/I94/I96UPTZ@Ӱʧ@An2~3~|}lʧ@ 
	8. [Bug 18310] V6.04.11 Motion Trigger Threshold w]Ȭ10 ,PSPECwq1P 
	9. [Bug 18311] B54u@DIO, URL EVENT_DI2 Ӧ^ 
	10.[Bug 18252] }AI92/I94/I96eOJAPTZoom~|Auto Focus 
	11.[Bug 18259] I92/I94/I96 bWeb ConfiguratorDay&Night]wD/NA|LkD/N Mode 
	12.[Bug 18220] SD card full then auto del old file cause camera memory 
	13.[Bug 18227] Schedule to upload images,   bvL{, NCamera_q, AsWq,  |i troubleshooting page
	14.Change dns setting manually on fly
	
[Limitation]
    1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
    2. On the platform A1, the H.264 encoding out of the video stream is high profile cause can't be played in the QuickTime.
    3. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and
       cause the network to some errors occurred. This case only occurs the the D/N models.
    4. When OSG function is activated, the snapshot always captured image data from channel 1.
########################################################################
########################################################################
A1D-500-V6.04.12
2013/07/03
This is a SBA firmware. Support the QVGA(320x240) resolution only for Channel 2.

Bootloader: BOOTLOADER-500-V01.07
A1 SDK: 2.00.25
dev_cap version: V1.1.36
ISP module version: 1.01.29 and A1_ISP: 1.01.29.04
ECM version: v1.0.0.30
Web UI:  V1.00.23
LibHttp: V1.00.35
OpenSSL V1.00.08
LibRtsp V1.00.29
Wan Daemon V1.00.22
Wan Daemon_api V1.00.08
DateTime Daemon V1.00.05
Gsoap library: V6.01.11

[Limitation]
    1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
    2. On the platform A1, the H.264 encoding out of the video stream is high profile cause can't be played in the QuickTime.
    3. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and
       cause the network to some errors occurred. This case only occurs the the D/N models.
    4. When OSG function is activated, the snapshot always captured image data from channel 1.
    5. FPS number of model I91/I92/I93/I94/I95/I96 is about 27 when the resolution is 1080p.

########################################################################
########################################################################
A1D-500-V6.04.11
2013/06/28

Bootloader: BOOTLOADER-500-V01.07
A1 SDK: 2.00.25
dev_cap version: V1.1.32
ISP module version: 1.01.27 and A1_ISP: 1.01.27.04
ECM version: v1.0.0.30
Web UI:  V1.00.23
LibHttp: V1.00.35
OpenSSL V1.00.08
LibRtsp V1.00.29
Wan Daemon V1.00.22
Wan Daemon_api V1.00.08
DateTime Daemon V1.00.05
Gsoap library: V6.01.11

[New Feature]
	1. Add External ISP module at the BSP sdk.
		
[Bug Fixed]
	1. [Bug 13173] Motion sensitivity 70% --> Motion trigger
	2. [Bug 14049] P@Region & H=>yhtrigger,^ӨStrigger
	3. [Bug 14054] E11 IStatic IP addressMPEnable Audio\,MSave reboot,|o{cameras},voSX,oILWeb UI \
	4. [Bug 14155] D51 On/Off Test FAILA200FIAL2C
	5. [Bug 15083] PAP-5100 Soft PoweronoffOFail,|X{Lk}{H
	6. [Bug 17199] Factory Default,ݤStream 1v
	7. [Bug 17343] WEB live page can't get the stream 1 and 2 video.
	8. [Bug 17345] D62 Software power on/off got result fail
	9. [Bug 17349] Schedule to upload images, loginɶiJ troubleshooting page (o;v) 
	10.[Bug 17453] Schedule to upload images, set schedule 60 mins to upload 3570 snapshots=> enter troubleshooting page.
	12.[Bug 17467] SD Card gɥѥBLiveeLvX 
	13.[Bug 17471] SD card can't keep going write the files.
	14.[Bug 17571] E74/E86 Chamber, DeviceiJTroubleshooting Page 
	15.[Bug 17736] HW Power on offO,|oͺIϪeA(v: 13/1000) 
	16.[Bug 17808] D91 HW Power on offFail,X{ "SNAPSHOT RSP FAIL, ReceiveSnapshotRsp NG" 
	17.[Bug 14052] Trigger ee 1/3=> Motion SQTrigger 
	18.[Bug 17475] PRɮצ URL Command DISK_REMOVE_OLD_FILES Fail
	19.[Bug 17793] D91/D92/B87 DevcapStorageȤT
	20.[Bug 18084] Video connect failed, cannot get stream.
	21.Fixed the OEM_Model_name always is overwritten from oem_model_description and oem_model_description is always an empty string.
	
[Limitation]
    1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
    2. On the platform A1, the H.264 encoding out of the video stream is high profile cause can't be played in the QuickTime.
    3. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and
       cause the network to some errors occurred. This case only occurs the the D/N models.
    4. When OSG function is activated, the snapshot always captured image data from channel 1.
    5. FPS number of model I91/I92/I93/I94/I95/I96 is about 27 when the resolution is 1080p.
########################################################################
########################################################################
A1D-500-V6.04.10
2013/06/26
This is a SBA firmware. Add H264_PROFILE URL CMD let H.264 Profile can be changed on the fly.

Bootloader: BOOTLOADER-500-V01.07
A1 SDK: 2.00.25
dev_cap version: V1.1.34
ISP module version: 1.01.28 and A1_ISP: 1.01.28.04
ECM version: v1.0.0.27
Web UI:  V1.00.20
LibHttp: V1.00.35
OpenSSL V1.00.08
LibRtsp V1.00.29
Wan Daemon V1.00.22
Wan Daemon_api V1.00.08
DateTime Daemon V1.00.05
Gsoap library: V6.01.06

[Limitation]
    1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
    2. On the platform A1, the H.264 encoding out of the video stream is high profile cause can't be played in the QuickTime.
    3. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and
       cause the network to some errors occurred. This case only occurs the the D/N models.
    4. When OSG function is activated, the snapshot always captured image data from channel 1.
    5. FPS number of model I91/I92/I93/I94/I95/I96 is about 27 when the resolution is 1080p.
########################################################################
########################################################################
A1D-500-V6.04.09
2013/06/24
Release purpose: 1. EVT testing: B96

Bootloader: BOOTLOADER-500-V01.07
A1 SDK: 2.00.25
dev_cap version: V1.1.34
ISP module version: 1.01.28 and A1_ISP: 1.01.28.04
ECM version: v1.0.0.27
Web UI:  V1.00.20
LibHttp: V1.00.35
OpenSSL V1.00.08
LibRtsp V1.00.29
Wan Daemon V1.00.22
Wan Daemon_api V1.00.08
DateTime Daemon V1.00.05
Gsoap library: V6.01.06

[Limitation]
    1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
    2. On the platform A1, the H.264 encoding out of the video stream is high profile cause can't be played in the QuickTime.
    3. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and
       cause the network to some errors occurred. This case only occurs the the D/N models.
    4. When OSG function is activated, the snapshot always captured image data from channel 1.
    5. FPS number of model I91/I92/I93/I94/I95/I96 is about 27 when the resolution is 1080p.

########################################################################
########################################################################
A1D-500-V6.04.08
2013/06/18
Release purpose: 1. EVT testing: I91/I92/I93/I94/I95/I96

Bootloader: BOOTLOADER-500-V01.07
A1 SDK: 2.00.25
dev_cap version: V1.1.32
ISP module version: 1.01.27 and A1_ISP: 1.01.27.03
ECM version: v1.0.0.27
Web UI:  V1.00.20
LibHttp: V1.00.35
OpenSSL V1.00.08
LibRtsp V1.00.29
Wan Daemon V1.00.22
Wan Daemon_api V1.00.08
DateTime Daemon V1.00.05
Gsoap library: V6.01.06

[New Feature]
	1. Add External ISP module at the BSP sdk.
	
[Limitation]
    1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
    2. On the platform A1, the H.264 encoding out of the video stream is high profile cause can't be played in the QuickTime.
    3. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and
       cause the network to some errors occurred. This case only occurs the the D/N models.
    4. When OSG function is activated, the snapshot always captured image data from channel 1.
    5. FPS number of model I91/I92/I93/I94/I95/I96 is about 27 when the resolution is 1080p.

########################################################################
########################################################################

A1D-500-V6.04.07
2013/06/11
Release purpose: 1. EVT testing: B54/B55/B56/B52

Bootloader: BOOTLOADER-500-V01.07
A1 SDK: 2.00.24
dev_cap version: V1.1.31
ISP module version: 1.01.27 and A1_ISP: 1.01.27.02
ECM version: v1.99.0.29
Web UI:  V1.00.22
LibHttp: V1.00.35
OpenSSL V1.00.08
LibRtsp V1.00.29
Wan Daemon V1.00.22
Wan Daemon_api V1.00.08
DateTime Daemon V1.00.05
Gsoap library: V6.01.06

[Limitation]
    1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
    2. On the platform A1, the H.264 encoding out of the video stream is high profile cause can't be played in the QuickTime.
    3. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and
       cause the network to some errors occurred. This case only occurs the the D/N models.
    4. When OSG function is activated, the snapshot always captured image data from channel 1.
    5. FPS of B52 is about 23~25 when the video resolution is N1920x1080.

[UI  Bug]
1.ϥePTZɡANQrǤ߫VY@AUƹAåpSPECһӦmܦeIC
2.NeZoom inAT{Miniature ViewWةҰ骺mMثeLive ViewWemۦPAɦbMiniature ViewWܥ@mUƹAe|^eC
3.ePTZҦAϥηƹʵeAe|X{YAp|@ADF5seΥ}LIVE ViewA^hLive ViewC
4.Ceilling Mounting bPanorama modeɡAUbe|}HC
5.Ceilling MountingWUӵe_ӡC

########################################################################
########################################################################
A1D-500-V6.04.06
2013/06/05
Release purpose: 1. Re-test EVT1: B95
				 2. New Model: E27/E37/E77/E47/E68/E88/E69

Bootloader: BOOTLOADER-500-V01.06
A1 SDK: 2.00.22
dev_cap version: V1.1.30
ISP module version: 1.01.26 and A1_ISP: 1.01.26.02
ECM version: v1.0.0.27
Web UI:  V1.00.20
LibHttp: V1.00.35
OpenSSL V1.00.08
LibRtsp V1.00.29
Wan Daemon V1.00.22
Wan Daemon_api V1.00.08
DateTime Daemon V1.00.05
Gsoap library: V6.01.06

*********************************************************************************
** Supported Camera List
*********************************************************************************
[ EVT1 ]-------------------------------------------------------------------------

	-- OV9715 --
		* V1.01.25
			D91
		* V1.01.19
			D41/E41A
		* V1.01.16
			D21-A0, E21-A0, D21,
			E71, D31, E61, E81,
		* Since V1.01.15
			D11, D54, E52, E51, D51, E31, E11, E21, E41,
			E91, D64, D71, D81,

	-- OV5653 --
		* V1.01.25
			D92
		* V1.01.22
			R1E D12
		* V1.01.19
			R1E D42/E42A/E43A
		* V1.01.16
			D22, E22
			D22-A0, E22-A0
			D32, E72, E73, E62, E63, E82, E83
		* Since V1.01.15
			E32, E33, E53, E54, E12, E13, D52, E42, E43.
			D55, E92, D65

	-- AR0331 --
		* V1.01.21
			D61, E66, E25
		* V1.01.19
			E34,E64/E65,E85/E86 ,E74,E24
		* V1.01.17
			E64, E45, E46

	-- IMX-122 --
		* V1.01.25
			E95
		* V1.01.23
			E67, E84, E44, D62, (already tested by SE and CVT)
		* V1.01.19
			E67/D62/E84
			E23
		* V1.01.17
			E84, E44

	-- AR0130 --
		* V1.01.25
			E94
		* V1.01.24
			E25, E66, D61

[ EVT0 ]---------------------------------------------------------------------------

	-- OV9715 --
		* V1.01.25
			D91
		* V1.01.16
			D41, E41A
		* Since V1.01.15
			D11, E11, E31, E52, E71, E51, D51, D31, E61, E81, E41, D71,
			D81 ,D21, D21-A0 ,E21, E21-A0, D54, D64, E91

	-- OV5653 --
		* V1.01.25
			E93, D92, B61/B81, B54
		* V1.01.23
			B51, B52,
		* V1.01.21
			B56
		* V1.01.16
			D42, E42A, E43A (R1D)
		* Since V1.01.15
			D32, D12, D52, E12, E13, E32, E33, E53, E54, E72, E73, E42, E43,
			E62, E63, E82, E83, E22, D72, D82, E22, E22-A0, D55, E92, D65

	-- AR0331 --
		* V1.01.26
			E47,E68,E88
		* V1.01.25
			B67/B81, B97, B56
		* V1.01.23
			B54
		* V1.01.22
			B95, B96
		* V1.01.21
			B58
		* V1.01.17
			E24,
		* V1.01.16
			D61, E66
		* Since V1.01.15
			E64, E45,E46,E65,E85,E86 ,E74 ,E34

	-- IMX-122 -- ?1/8
		* V1.01.26
			E69
		* V1.01.25
			B95,
		* V1.01.20
			E95,
		* Since V1.01.15
			E84, E23 ,E44 ,E67 ,B93, D62

	-- AR0130 --
		* V1.01.20
			E94,
		* V1.01.17
			E25,
		* Since V1.01.15
			E66 , D61

	-- MT9J003 --
		* V1.01.26
			E27,E37,E77
		* V1.01.25
			B55
		* V1.01.21
			B53 , B57

[Limitation]
    1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
    2. On the platform A1, the H.264 encoding out of the video stream is high profile cause can't be played in the QuickTime.
    3. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and
       cause the network to some errors occurred. This case only occurs the the D/N models.
    4. When OSG function is activated, the snapshot always captured image data from channel 1.
    5. B95: HW is not ready (Fail to test MIRROR_MODE, FLIP_MODE, Video directive, AUDIO IN/OUT, DI/DO, PTZ Testing, and MousePTZ Testing)
       E27: HW is not ready (Fail to test AUDIO IN/OUT, and DI/DO). 
	    FPS is about 23~25 on resolution 1280X720 and 1920X1080.
       E37: HW is not ready (Fail to test Video directive)
	    FPS is about 23~25 on resolution 1280X720 and 1920X1080.
       E77: HW is not ready (Fail to test AUDIO IN/OUT, and DI/DO).	
	    FPS is about 23~25 on resolution 1280X720 and 1920X1080.
       E47, E68, E88, E69: HW is not ready (Fail to test AUDIO IN/OUT, and DI/DO).


########################################################################
########################################################################
A1D-500-V6.04.05
2013/05/30

Bootloader: BOOTLOADER-500-V01.06
A1 SDK: 2.00.22
dev_cap version: V1.1.29
ISP module version: 1.01.25 and A1_ISP: 1.01.25.01
ECM version: v1.0.0.27
Web UI:  V1.00.20
LibHttp: V1.00.35
OpenSSL V1.00.08
LibRtsp V1.00.27
Wan Daemon V1.00.22
Wan Daemon_api V1.00.08
DateTime Daemon V1.00.05
Gsoap library: V6.01.06

[Known issue]
    1. Continues zoom and zoom preset change frequently, will cause continues zoom doesn't work.

[Limitation]
    1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
    2. On the platform A1, the H.264 encoding out of the video stream is high profile cause can't be played in the QuickTime.
    3. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and
       cause the network to some errors occurred. This case only occurs the the D/N models.
    4. When OSG function is activated, the snapshot always captured image data from channel 1.

########################################################################
########################################################################
A1D-500-V6.04.04
2013/05/24
Release purpose: 1. New model EVT testing: E93/D91/D92, B61/B67/B81/B87.
         2. Re-test EVT: E94/E95

Bootloader: BOOTLOADER-500-V01.06
A1 SDK: 2.00.21
dev_cap version: V1.1.28
ISP module version: 1.01.25 and A1_ISP: 1.01.25.01
ECM version: v1.0.0.27
Web UI:  V1.00.20
LibHttp: V1.00.35
OpenSSL V1.00.08
LibRtsp V1.00.27
Wan Daemon V1.00.22
Wan Daemon_api V1.00.08
DateTime Daemon V1.00.05
Gsoap library: V6.01.06

[Known issue]
    1. Continues zoom and zoom preset change frequently, will cause continues zoom doesn't work.

[Limitation]
    1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
    2. On the platform A1, the H.264 encoding out of the video stream is high profile cause can't be played in the QuickTime.
    3. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and
       cause the network to some errors occurred. This case only occurs the the D/N models.
    4. When OSG function is activated, the snapshot always captured image data from channel 1.

########################################################################
########################################################################
A1D-500-V6.04.03
2013/05/23 by MingYoung
SBA firmware for Vicon Motion Detection Issue.
This firmware is based on 6.03.17.
The motion sensitivity are
unsigned int mov_th[7] = {8000,2000,500,200,100,700,30};
unsigned int sad_th[7] = {1200,800 ,400,200,150,100,70};
and the default object size is 1% in the default.conf


########################################################################
########################################################################
A1D-500-V6.04.02
2013/04/30
Release purpose: for E25, E66, D61 EVT2

Bootloader: BOOTLOADER-500-V01.06
A1 SDK: 2.00.19
dev_cap version: V1.1.23
ISP module version: 1.01.24 and A1_ISP: 1.01.24.01
ECM version: v1.0.0.27 (NB version keep on the V1.0.0.26)
Web UI:  V1.00.19 
LibHttp: V1.00.35
OpenSSL V1.00.08
LibRtsp V1.00.24
Wan Daemon V1.00.21
Wan Daemon_api V1.00.08
DateTime Daemon V1.00.05
Gsoap library: V6.01.05

[Modified]
	1. Change the devcap for the sensor of AR0130, the resolution capability will be adjusted to 1280x960, not 1280x720.

[Limitation]
	1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
	2. On the platform A1, the H.264 encoding out of the video stream is high profile cause can't be played in the QuickTime.
	3. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and 
	   cause the network to some errors occurred. This case only occurs the the D/N models.
	4. When OSG function is activated, the snapshot always captured image data from channel 1.
########################################################################
########################################################################
A1D-500-V6.04.01
2013/04/30
Release purpose: EE EVT (B51/B52/B54)

Bootloader: BOOTLOADER-500-V01.06
A1 SDK: 2.00.19
dev_cap version: V1.1.23
ISP module version: 1.01.24 and A1_ISP: 1.01.24.01
ECM version: v1.0.0.27 (NB version keep on the V1.0.0.26)
Web UI:  V1.00.19 
LibHttp: V1.00.35
OpenSSL V1.00.08
LibRtsp V1.00.24
Wan Daemon V1.00.21
Wan Daemon_api V1.00.08
DateTime Daemon V1.00.05
Gsoap library: V6.01.05

[Limitation]
	1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
	2. On the platform A1, the H.264 encoding out of the video stream is high profile cause can't be played in the QuickTime.
	3. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and 
	   cause the network to some errors occurred. This case only occurs the the D/N models.
	4. When OSG function is activated, the snapshot always captured image data from channel 1.
########################################################################
########################################################################
A1D-500-V6.04.00
2013/04/24
Release purpose: EE EVT (B95/B96)

Bootloader: BOOTLOADER-500-V01.06
A1 SDK: 2.00.19
dev_cap version: V1.1.23
ISP module version: 1.01.23 and A1_ISP: 1.01.23.01
ECM version: v1.0.0.27 (NB version keep on the V1.0.0.26)
Web UI:  V1.00.19 
LibHttp: V1.00.35
OpenSSL V1.00.08
LibRtsp V1.00.24
Wan Daemon V1.00.21
Wan Daemon_api V1.00.08
DateTime Daemon V1.00.05
Gsoap library: V6.01.03

[New Feature]
	1. A part of URL commands about PTZ functions has been completed. There are ZOOM, MOVE, FOCUS, ADDR, VENDOR.
		2. RTC function is not ready.

[Limitation]
	1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
	2. On the platform A1, the H.264 encoding out of the video stream is high profile cause can't be played in the QuickTime.
	3. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and 
	   cause the network to some errors occurred. This case only occurs the the D/N models.
	4. When OSG function is activated, the snapshot always captured image data from channel 1.
########################################################################
########################################################################
A1D-500-V6.03.17
2013/05/08

Bootloader: BOOTLOADER-500-V01.06
A1 SDK: 2.00.21
dev_cap version: V1.1.25
ISP module version: 1.01.24 and A1_ISP: 1.01.24.01
ECM version: v1.0.0.27
Web UI:  V1.00.20 
LibHttp: V1.00.35
OpenSSL V1.00.08
LibRtsp V1.00.26
Wan Daemon V1.00.21
Wan Daemon_api V1.00.08
DateTime Daemon V1.00.05
Gsoap library: V6.01.06

[Modified]
	1. Add a new resolution as 1280x960 only for AR0130. (sensor output resolution always fixed at 1280x960)
	
[Bug fixed]
	1. [Bug 17159] E45(AR0331) test ONVIF fail.
	2. [Bug 16742] Web stream2 resolution not match SPEC,when use OEM_loader utility change device to OEM.
	3. [Bug 17233] Cannot upload files to Local Storage after fail to unmount SD card when link to DUT-A FTP.
	4. [Bug 17234] Cannot follow user defined file name to record images in Local Storage.
	5. [Bug 17340] Camera keep going recording, but the file management can't show the old recording file on web UI. 
	6. [Bug 17348] ϤSD Card,File Management ]8,N|A~s 
	7. [Bug 17231] Upload period 1800 seconds video,it will record additional 0 min video 
	8. [Bug 17081] SD card laɮ׾ɭPLkAsWrecording file to SD card
	9. [Bug 17073] Schedule to upload images, click Search and Go to last page in File management, enter troubleshooting page.
	10.[Bug 17400] WEB UIWmanual shutter speed defaultȻPSpec. P.

[Limitation]
	1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
	2. On the platform A1, the H.264 encoding out of the video stream is high profile cause can't be played in the QuickTime.
	3. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and 
	   cause the network to some errors occurred. This case only occurs the the D/N models.
	4. When OSG function is activated, the snapshot always captured image data from channel 1.
	5. Onvif conformance testing may not be passed if the camera support the resolution more than 3M.
########################################################################
########################################################################
A1D-500-V6.03.16
2013/05/06

Bootloader: BOOTLOADER-500-V01.06
A1 SDK: 2.00.21
dev_cap version: V1.1.25
ISP module version: 1.01.24 and A1_ISP: 1.01.24.01
ECM version: v1.0.0.27
Web UI:  V1.00.20 
LibHttp: V1.00.35
OpenSSL V1.00.08
LibRtsp V1.00.26
Wan Daemon V1.00.21
Wan Daemon_api V1.00.08
DateTime Daemon V1.00.05
Gsoap library: V6.01.06

[Bug fixed]
	1. [Bug 17159] E45(AR0331) test ONVIF fail.
	2. [Bug 16742] Web stream2 resolution not match SPEC,when use OEM_loader utility change device to OEM.
	3. [Bug 17233] Cannot upload files to Local Storage after fail to unmount SD card when link to DUT-A FTP.
	4. [Bug 17234] Cannot follow user defined file name to record images in Local Storage.
	5. [Bug 17340] Camera keep going recording, but the file management can't show the old recording file on web UI. 
	6. [Bug 17348] ϤSD Card,File Management ]8,N|A~s 
	7. [Bug 17231] Upload period 1800 seconds video,it will record additional 0 min video 
	8. [Bug 17081] SD card laɮ׾ɭPLkAsWrecording file to SD card
	9. [Bug 17073] Schedule to upload images, click Search and Go to last page in File management, enter troubleshooting page.
	10.[Bug 17400] WEB UIWmanual shutter speed defaultȻPSpec. P.
	
[Limitation]
	1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
	2. On the platform A1, the H.264 encoding out of the video stream is high profile cause can't be played in the QuickTime.
	3. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and 
	   cause the network to some errors occurred. This case only occurs the the D/N models.
	4. When OSG function is activated, the snapshot always captured image data from channel 1.
########################################################################
########################################################################
A1D-500-V6.03.15
2013/04/11

Purpose: EE EVT (D12) & formal release
Bootloader: BOOTLOADER-500-V01.06
A1 SDK: 2.00.18
dev_cap version: V1.1.22
ISP module version: 1.01.22 and A1_ISP: 1.00.22.00
ECM version: v1.0.0.26
Web UI:  V1.00.18
LibHttp: V1.00.35
OpenSSL V1.00.08
LibRtsp V1.00.24
Wan Daemon V1.00.21
Wan Daemon_api V1.00.08
DateTime Daemon V1.00.05
Gsoap library: V6.01.03

[Bug fixed]
	1. [Bug 17093] Unit Type of System Information displays error
	2. [Bug 17068] Connect by RTP failed, after changing encoder.
	3. [Bug 17078] Install ECM on NB cause ECM version=1.0.0.24(correct version:1.0.0.25)
	4. [Bug 17065] Mount Disk fail, show "not linux partition=b" in system Log.
	5. [Bug 17071] Continue to remove files in file manamgement, IE not responding and cannot log in Web UI again.
	6. [Bug 17086] LRoot Account,EventeURL ۤv,|yFWiTrobuleshooting Page
	7. [Bug 17085] Enabled Event "HTTP Server 1 Configuration" ,UINetwork Address / Ports / User Name|ܦǦ
	8. [Bug 17077] Web UI didn't check SNMP V1/V2 or V3, after Enable SNMP setting will be back to Uncheck status.
	9. [Bug 17066] Scan Disk fail, File management shouldn't be enabled.
	10.[Bug 13422] Frame Wv 
	12.[Bug 16120] Frame Checker is abnormal when camera set FPS = 1 even TCP and RTP. Frame checker file display 2 I in one second.
	13.[Bug 17080] Percentage of Usage100% to del old file cause Web page enter Troubleshooting
	14.[Bug 15754] JFAT32SD Card,ùMount,榡ƫeSD CardiHQgJɮ
	15.[Bug 17064] Mount FAT32 file system SD, pop msg,"Fail to unmount storage media"
	16.[Bug 17066] Scan Disk fail, File management shouldn't be enabled.
	17.[Bug 17087] Shutter Speed 1/15(60Hz) & 1/25(50Hz) ,bFrame Rate]w30,ڪFrame Rate & GOPPSPECwq
	18.[Bug 15501] File Management, search recording by time, result is wrong.
	19.[Bug 15744] Local stroage snapshot stream 2=> Privacy mask mPLive preview P

[Limitation]
	1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
	2. On the platform A1, the H.264 encoding out of the video stream is high profile cause can't be played in the QuickTime.
	3. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and 
	   cause the network to some errors occurred. This case only occurs the the D/N models.
	4. When OSG function is activated, the snapshot always captured image data from channel 1.
########################################################################
########################################################################
A1D-500-V6.03.14
2013/04/08

Purpose: EE EVT (B56/B57/B58)
Bootloader: BOOTLOADER-500-V01.06
A1 SDK: 2.00.16
dev_cap version: V1.1.21
ISP module version: 1.01.21 and A1_ISP: 1.99.21.00
ECM version: v1.0.0.26
Web UI:  V1.00.17
LibHttp: V1.00.35
OpenSSL V1.00.08
LibRtsp V1.00.24
Wan Daemon V1.00.21
Wan Daemon_api V1.00.08
DateTime Daemon V1.00.05
Gsoap library: V6.01.03

[New Feature]
	1. DI/DO function is available, please use URL CMD to verify the DI/DO. 
	   DI => /cgi-bin/encoder?USER=admin&PWD=123456&DIO_STATUS
	   DO => /cgi-bin/encoder?USER=admin&PWD=123456&DIO_OUTPUT

[Known issue]
	1. Preview page is abnormal 
	2. Audio has noise 

[Limitation]
	1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
	2. On the platform A1, the H.264 encoding out of the video stream is high profile cause can't be played in the QuickTime.
	3. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and 
	   cause the network to some errors occurred. This case only occurs the the D/N models.
	4. When OSG function is activated, the snapshot always captured image data from channel 1.
########################################################################
########################################################################
A1D-500-V6.03.13
2013/04/03

Purpose: EE EVT (B56/B57/B58)
Bootloader: BOOTLOADER-500-V01.06
A1 SDK: 2.00.16
dev_cap version: V1.1.21
ISP module version: 1.01.21 and A1_ISP: 1.99.21.00
ECM version: v1.0.0.26
Web UI:  V1.00.17
LibHttp: V1.00.35
OpenSSL V1.00.08
LibRtsp V1.00.24
Wan Daemon V1.00.21
Wan Daemon_api V1.00.08
DateTime Daemon V1.00.05
Gsoap library: V6.01.03

[Known issue]
	1. Preview page is abnormal 
	2. Audio has noise 
	3. DIO test is failed

[Limitation]
	1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
	2. On the platform A1, the H.264 encoding out of the video stream is high profile cause can't be played in the QuickTime.
	3. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and 
	   cause the network to some errors occurred. This case only occurs the the D/N models.
	4. When OSG function is activated, the snapshot always captured image data from channel 1.
########################################################################
########################################################################
A1D-500-V6.03.12
2013/04/01

Purpose: SBA firmware. Fix the D54 always reboots into debug mode (ONVIF 2.2).
Bootloader: BOOTLOADER-500-V01.06
A1 SDK: 2.00.16
dev_cap version: V1.1.20
ISP module version: 1.01.21 and A1_ISP: 1.99.21.00
ECM version: v1.0.0.25
Web UI:  V1.00.16
LibHttp: V1.00.35
OpenSSL V1.00.08
LibRtsp V1.00.24
Wan Daemon V1.00.21
Wan Daemon_api V1.00.08
DateTime Daemon V1.00.05
Gsoap library: V6.01.03

[Modified]
	1. update Gsoap library to fix always into the troubleshooting page.
	2. update RTSP library to fix the RTP streaming failure when the encode type changed.
	
[Limitation]
	1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
	2. On the platform A1, the H.264 encoding out of the video stream is high profile cause can't be played in the QuickTime.
	3. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and 
	   cause the network to some errors occurred. This case only occurs the the D/N models.
	4. When OSG function is activated, the snapshot always captured image data from channel 1.
########################################################################
########################################################################
A1D-500-V6.03.11
2013/03/29

Purpose: SBA firmware. Fix the D54 always reboots into debug mode (ONVIF 2.2).
Bootloader: BOOTLOADER-500-V01.06
A1 SDK: 2.00.16
dev_cap version: V1.1.20
ISP module version: 1.01.21 and A1_ISP: 1.01.21
ECM version: v1.0.0.25
Web UI:  V1.00.16
LibHttp: V1.00.35
OpenSSL V1.00.08
LibRtsp V1.00.23
Wan Daemon V1.00.21
Wan Daemon_api V1.00.08
DateTime Daemon V1.00.05
Gsoap library: V6.01.02

****************************************************************************
** Supported Camera List
****************************************************************************
[ EVT2 ]-------------------------------------------------------------------------
	-- OV9715 --
		* V1.01.19
			D41/E41A
		* V1.01.16
			D21-A0, E21-A0, D21, E71, D31, E61, E81,
		* Since V1.01.15
			D11, D54, E52, E51, D51, E31, E11, E21, E41,
			E91, D64, D71, D81,
	-- OV5653 --
		* V1.01.19
			R1E D42/E42A/E43A
		* V1.01.16
			D22, E22, D22-A0, E22-A0, D32, E72, E73, E62, E63, E82, E83
		* Since V1.01.15
			E32, E33, E53, E54, E12, E13, D52, E42, E43.
			D55, E92, D65
	-- AR0331 --
		* V1.01.21
			D61, E66, E25
		* V1.01.19
			E34,E64/E65,E85/E86 ,E74,E24
		* V1.01.17
			E64, E45, E46
	-- IMX-122 --
		* V1.01.19
			E67/D62/E84/E23
		* V1.01.17
			E84, E44
[ EVT1]---------------------------------------------------------------------------
	-- OV9715 --
		* V1.01.16
			D41, E41A
		* Since V1.01.15
			D11, E11, E31, E52, E71, E51, D51, D31, E61, E81,
			E41, D71, D81 ,D21, D21-A0 ,E21, E21-A0, D54, D64, E91
	-- OV5653 --
		* V1.01.21
			B56
		* V1.01.16
			D42, E42A, E43A (R1D)
		* Since V1.01.15
			D32, D12, D52, E12, E13, E32, E33, E53, E54, E72,
			E73, E42, E43,
			E62, E63, E82, E83, E22, D72, D82, E22, E22-A0, D55,
			E92, D65
	-- AR0331 --
		* V1.01.21
			B58
		* V1.01.17
			E24,
		* V1.01.16
			D61, E66
		* Since V1.01.15
			E64, E45,E46,E65,E85,E86 ,E74 ,E34
	-- IMX-122 -- ̪n 1/8
		* V1.01.20
			E95,
		* Since V1.01.15
			E84, E23 ,E44 ,E67 ,B93, D62
	-- AR0130 --
		* V1.01.20
			E94,
		* V1.01.17
			E25,
		* Since V1.01.15
			E66 , D61
	-- MT9J003 --
		* V1.01.21
			B53 , B57
===============================================================================

[Limitation]
	1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
	2. On the platform A1, the H.264 encoding out of the video stream is high profile cause can't be played in the QuickTime.
	3. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and 
	   cause the network to some errors occurred. This case only occurs the the D/N models.
	4. When OSG function is activated, the snapshot always captured image data from channel 1.
########################################################################
########################################################################
A1D-500-V6.03.10
2013/03/27

Bootloader: BOOTLOADER-500-V01.06
A1 SDK: 2.00.16
dev_cap version: V1.1.20
ISP module version: 1.01.21 and A1_ISP: 1.01.21
ECM version: v1.0.0.25
Web UI:  V1.00.16
LibHttp: V1.00.35
OpenSSL V1.00.08
LibRtsp V1.00.23
Wan Daemon V1.00.21
Wan Daemon_api V1.00.08
DateTime Daemon V1.00.05
Gsoap library: V6.01.01

****************************************************************************
** Supported Camera List
****************************************************************************
[ EVT2 ]-------------------------------------------------------------------------
	-- OV9715 --
		* V1.01.19
			D41/E41A
		* V1.01.16
			D21-A0, E21-A0, D21, E71, D31, E61, E81,
		* Since V1.01.15
			D11, D54, E52, E51, D51, E31, E11, E21, E41,
			E91, D64, D71, D81,
	-- OV5653 --
		* V1.01.19
			R1E D42/E42A/E43A
		* V1.01.16
			D22, E22, D22-A0, E22-A0, D32, E72, E73, E62, E63, E82, E83
		* Since V1.01.15
			E32, E33, E53, E54, E12, E13, D52, E42, E43.
			D55, E92, D65
	-- AR0331 --
		* V1.01.21
			D61, E66, E25
		* V1.01.19
			E34,E64/E65,E85/E86 ,E74,E24
		* V1.01.17
			E64, E45, E46
	-- IMX-122 --
		* V1.01.19
			E67/D62/E84/E23
		* V1.01.17
			E84, E44
[ EVT1]---------------------------------------------------------------------------
	-- OV9715 --
		* V1.01.16
			D41, E41A
		* Since V1.01.15
			D11, E11, E31, E52, E71, E51, D51, D31, E61, E81,
			E41, D71, D81 ,D21, D21-A0 ,E21, E21-A0, D54, D64, E91
	-- OV5653 --
		* V1.01.21
			B56
		* V1.01.16
			D42, E42A, E43A (R1D)
		* Since V1.01.15
			D32, D12, D52, E12, E13, E32, E33, E53, E54, E72,
			E73, E42, E43,
			E62, E63, E82, E83, E22, D72, D82, E22, E22-A0, D55,
			E92, D65
	-- AR0331 --
		* V1.01.21
			B58
		* V1.01.17
			E24,
		* V1.01.16
			D61, E66
		* Since V1.01.15
			E64, E45,E46,E65,E85,E86 ,E74 ,E34
	-- IMX-122 -- ̪n 1/8
		* V1.01.20
			E95,
		* Since V1.01.15
			E84, E23 ,E44 ,E67 ,B93, D62
	-- AR0130 --
		* V1.01.20
			E94,
		* V1.01.17
			E25,
		* Since V1.01.15
			E66 , D61
	-- MT9J003 --
		* V1.01.21
			B53 , B57
===============================================================================

[Bug Fixed]
	1. [Bug 13173] Motion sensitivity 70% --> Motion trigger
	2. [Bug 13287] MJPEG frame
	3. [Bug 13331] D51,RTP,H264,640x480,FPS=3,CBR=28Kbps hframe
	4. [Bug 13731] Encode is MJPEG, live view ɶܤӺCθ
	5. [Bug 14042] ϥVLCRTP over multicast stream1elag Y
	6. [Bug 14049] P@Region & H=>yhtrigger,^ӨStrigger
	7. [Bug 14050] Activity motion SFTriggerI,motion Trigger
	8. [Bug 14052] Trigger ee 1/3=> Motion SQTrigger
	9. [Bug 14469] sfirmwareɭ,Camera Web UI||oIELkܺ
	10.[Bug 14475] FrameChecker ,ĿTest Mode, C10suRTP/UDP@, gL8pɫv|db8Ӥpɫee, eW|{bv,v|QYpåBñ
	11.[Bug 14786] RTP Over UDP, continue play 15 hours, stream1 & Stream2 tZWL3
	12.[Bug 16895] "Restore image setting to default" WDRS@
	13.[Bug 14988] Pɶ}IE,åB䤤@IEReboot,bLiveIEv,ߨN쥻Save RebootIEVideo (Power LEDOG۪,٨S),voVideoECMLkXv
	14.[Bug 15397] Drop frame when upload video to local storage bYFPS զXU,WL@,SFrame
	15.[Bug 15500] Set schedule to upload images to Local Storage, only upload 3.59%, but show table full in console and login web again=>No files in File Management
	16.[Bug 15745] Setting HTTPS then Fatory default casue camera crash
	17.[Bug 15885] Set schedule to run URL to SAVE_REBOOT, FW crash.
	18.[Bug 16067] Set MJPEG audion__
	19.[Bug 16083] OV5653(5M), Resolution ]̤j, Back to live preview => eO¦
	20.[Bug 16126] WDR cannot work when Exposure mode set to "Manual".
	21.[Bug 16234] Setting Manual shutter speed then save & reboot enter to troubleshooing page
	22.[Bug 16918] When fireware upload processing, please disable "Browse" and " Apply" button
	23.[Bug 16990] E95w]Mirror/FlipT
	24.[Bug 15895] In long-running failed connect FTP failed then upload video to Local Storage, FW crash.
	25.[Bug 16228] After change device setting, IE pop up troubleshooting page.
	26.[Bug 15405] Local Storage,when writing file to click Search button,sometimes 1st file cannot display.
	
[Limitation]
	1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
	2. On the platform A1, the H.264 encoding out of the video stream is high profile cause can't be played in the QuickTime.
	3. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and 
	   cause the network to some errors occurred. This case only occurs the the D/N models.
	4. When OSG function is activated, the snapshot always captured image data from channel 1.
########################################################################
########################################################################
A1D-500-V6.03.09
2013/03/25

Purpose: EE EVT (models include: D61/E66/E25)
Bootloader: BOOTLOADER-500-V01.06
A1 SDK: 2.00.16
dev_cap version: V1.1.20
ISP module version: 1.01.21 and A1_ISP: 1.01.21
ECM version: v1.0.0.25
Web UI:  trunk
LibHttp: V1.00.35
OpenSSL V1.00.08
LibRtsp V1.00.23
Wan Daemon V1.00.21
Wan Daemon_api V1.00.08
DateTime Daemon V1.00.05
Gsoap library: V6.10.01

[Limitation]
	1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
	2. On the platform A1, the H.264 encoding out of the video stream is high profile cause can't be played in the QuickTime.
	3. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and 
	   cause the network to some errors occurred. This case only occurs the the D/N models.
	4. When OSG function is activated, the snapshot always captured image data from channel 1.
	5. Filesystem on MicroSD is limited to Ext4
########################################################################
########################################################################
A1D-500-V6.03.08
2013/03/15

Purpose: Release SBA firmware for Nuuo and Camera NB Firmware maker 2.02.07 new functions.
Bootloader: BOOTLOADER-500-V01.06
A1 SDK: 2.00.16
dev_cap version: V1.1.17
ISP module version: 1.01.20 and A1_ISP: 1.01.20
ECM version: v1.0.0.24
Web UI:  1.00.15
LibHttp: V1.00.35
OpenSSL V1.00.08
LibRtsp V1.00.22
Wan Daemon V1.00.21
Wan Daemon_api V1.00.08
DateTime Daemon V1.00.05
Gsoap library: V6.00.04

[Modified]
	1. Close the rtsp hosts only when video parameters was changed. update RTSP library to V1.00.22

[Limitation]
	1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
	2. On the platform A1, the H.264 encoding out of the video stream is high profile cause can't be played in the QuickTime.
	3. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and 
	   cause the network to some errors occurred. This case only occurs the the D/N models.
	4. When OSG function is activated, the snapshot always captured image data from channel 1.
	5. Filesystem on MicroSD is limited to Ext4
########################################################################
########################################################################
A1D-500-V6.03.07
2013/03/12

Purpose: EE EVT / SBA firmware. (models include: D62/E64/E67/E34/E23/E24/E94/E95)
Bootloader: BOOTLOADER-500-V01.06
A1 SDK: 2.00.16
dev_cap version: V1.1.17
ISP module version: 1.01.20 and A1_ISP: 1.01.20
ECM version: v1.0.0.24
Web UI:  1.00.15
LibHttp: V1.00.35
OpenSSL V1.00.08
LibRtsp V1.00.21
Wan Daemon V1.00.21
Wan Daemon_api V1.00.08
DateTime Daemon V1.00.05
Gsoap library: V6.00.04

******************************************************************************
** Supported Camera List
******************************************************************************
[ EVT2 ]-------------------------------------------------------------------------
-- OV9715 --
	* V1.01.19
		D41/E41A
	* V1.01.16
		D21-A0, E21-A0, D21, E71, D31, E61, E81,
	* Since V1.01.15
		D11, D54, E52, E51, D51, E31, E11, E21, E41, E91, D64, D71, D81,
-- OV5653 --
	* V1.01.19
		R1E D42/E42A/E43A
	* V1.01.16
		D22, E22, D22-A0, E22-A0, D32, E72, E73, E62, E63, E82, E83
	* Since V1.01.15
		E32, E33, E53, E54, E12, E13, D52, E42, E43, D55, E92, D65
-- AR0331 --
	* V1.01.19
		E34,E64/E65,E85/E86 ,E74,E24
	* V1.01.17
		E64, E45, E46
-- IMX-122 --
	* V1.01.19
		E67/D62/E84/E23
	* V1.01.17
		E84, E44
[ EVT1 ]---------------------------------------------------------------------------
-- OV9715 --
	* V1.01.16
		D41, E41A
	* Since V1.01.15
		D11, E11, E31, E52, E71, E51, D51, D31, E61, E81, E41, D71, D81 ,D21, D21-A0 ,E21, E21-A0, D54, D64, E91
-- OV5653 --
	* V1.01.16
		D42, E42A, E43A (R1D)
	* Since V1.01.15
		D32, D12, D52, E12, E13, E32, E33, E53, E54, E72, E73, E42, E43,
		E62, E63, E82, E83, E22, D72, D82, E22, E22-A0, D55, E92, D65
-- AR0331 --
	* V1.01.17
		E24,
	* V1.01.16
		D61, E66
	* Since V1.01.15
		E64, E45,E46,E65,E85,E86 ,E74 ,E34
-- IMX-122 -- ̪n1/8
	* Since V1.01.15
		E84, E23 ,E44 ,E67 ,B93, D62
-- AR0130 --
	* V1.01.17
		E25,
	* Since V1.01.15
		E66 , D61
===============================================================================

[Modified]
	1. Modify runtime lib for encoder, capture fast stop and then start.
	2. If the AE mode is manaul, firmware will auto change WDR level to OFF/disable(0). WDR item will be hidden in the Image tab page.
	3. When the power led default setting is ON, we will turn off the led before the streaming engine ready, and then turn on the led.
	4. Power led procedure will be modified. if the runtime power led is ON, when we detect the reset button is triggered, power led will turn off, otherwise.
	5. FileSystem Ext3 on MicroSD could be mounted.

[Re-test Items]
	1. [Bug 13173] Motion sensitivity 70% --> Motion trigger
	2. [Bug 13287] MJPEG frame
	3. [Bug 13331] D51,RTP,H264,640x480,FPS=3,CBR=28Kbps hframe
	4. [Bug 13731] Encode is MJPEG, live view ɶܤӺCθ
	5. [Bug 14042] ϥVLCRTP over multicast stream1elag Y
	6. [Bug 14049] P@Region & H=>yhtrigger,^ӨStrigger
	7. [Bug 14050] Activity motion SFTriggerI,motion Trigger
	8. [Bug 14052] Trigger ee 1/3=> Motion SQTrigger
	9. [Bug 14155] D51 On/Off Test FAILA200FIAL2C
	10.[Bug 14469] sfirmwareɭ,Camera Web UI||oIELkܺ
	11.[Bug 14475] FrameChecker ,ĿTest Mode, C10suRTP/UDP@, gL8pɫv|db8Ӥpɫee, eW|{bv,v|QYpåBñ
	12.[Bug 14726] E33, E54 and E13 eu when set as RTP, MJPEG and Resolution=2592X1944.
	13.[Bug 14786] RTP Over UDP, continue play 15 hours, stream1 & Stream2 tZWL3
	14.[Bug 14803] ϥIE9,bLiveϥSnapshot,IE|۰
	15.[Bug 14988] Pɶ}IE,åB䤤@IEReboot,bLiveIEv,ߨN쥻Save RebootIEVideo (Power LEDOG۪,٨S),voVideoECMLkXv
	16.[Bug 15083] PAP-5100 Soft PoweronoffOFail,|X{Lk}{H
	17.[Bug 15397] Drop frame when upload video to local storage bYFPS զXU,WL@,SFrame
	18.[Bug 15500] Set schedule to upload images to Local Storage, only upload 3.59%, but show table full in console and login web again=>No files in File Management
	19.[Bug 15745] Setting HTTPS then Fatory default casue camera crash
	20.[Bug 15885] Set schedule to run URL to SAVE_REBOOT, FW crash.
	21.[Bug 15895] In long-running failed connect FTP failed then upload video  to Local Storage, FW crash.
	22.[Bug 16067] Set MJPEG audion__
	23.[Bug 16083] OV5653(5M), Resolution ]̤j, Back to live preview => eO¦
	24.[Bug 16126] WDR cannot work when Exposure mode set to "Manual".
	25.[Bug 16234] Setting Manual shutter speed then save & reboot enter to troubleshooing page
	26.[Bug 15405] Local Storage,when writing file to click Search button,sometimes 1st file cannot display.

[Bug Fixed-RDQ]
	1. #23 Clear OSD Text fail on web UI & URL command
	2. #24 OSD_J"B"ɭPCameraError Loop
	
[Bug Fixed]
	1. [Bug 15415] upload imagelocal storage,LEventImages during Upload Period]h, Camera̦huX5iϤ
	2. [Bug 16235] Manual shutter & shutter speed setting 1/120 then change WDR cause snapshot pop "Error, Get a snapshot" message
	3. [Bug 12654] Changing Video Bit Rate Mode and GOP 1 I-frame makes the video wrong
	4. [Bug 16237] There is error a message after snapshot
	5. [Bug 15407] Link to DUT-A FTP and unmount SD card, cannot unmount but show "Storage can be safely removed" msg.
	6. [Bug 16228] After change device setting, IE pop up troubleshooting page.
	7. [Bug 16305] E46(AR0331)WDR =Disable but save & reboot cause live preview GפP(shutter speed=1/500)
	8.[Bug 16126] WDR cannot work when Exposure mode set to "Manual".
	9.[Bug 15393] On Login plug in SD card cause file system & status display unkown
	10.[Bug 14677] ϥPAP5100(v1.1.7.21)HPresolution զXrun frame check=> Camera crash
	11.[Bug 13383] [ISP-A1]E51bManual Shutter 1/13, |X{Flick
	12.[Bug 14475] FrameChecker ,ĿTest Mode, C10suRTP/UDP@, gL8pɫv|db8Ӥpɫee, eW|{bv,v|QYpåBñ
	13.[Bug 14937] D52 Manual Shutter 1/5, SnapshotϤ,|oIE۰
	14.[Bug 15888] 802.1X state is disable , Web doesn't hide all 802.1X configurations.
	15.[Bug 15878] Shouldn't allow upload 638x479 OSG image to 640x480 video resolution.
	16.[Bug 15877] Upload OSG image to stream1 and stream2, only change stream1 resolution shouldn't remove stream2 OSG image.
	17.[Bug 16625] Date Setting] "Set Manually" , Date: 2025/1/1, ECMWɶ|2023/1/1
	18.[Bug 16618] Only Region 2, Enter motion page again => Can' t Focus on region 2 ɭPActive
	
[Limitation]
	1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
	2. On the platform A1, the H.264 encoding out of the video stream is high profile cause can't be played in the QuickTime.
	3. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and 
	   cause the network to some errors occurred. This case only occurs the the D/N models.
	4. When OSG function is activated, the snapshot always captured image data from channel 1.
########################################################################
########################################################################
A1D-500-V6.03.06
2013/03/11

Purpose: EE EVT / SBA firmware. (models include: D62/E64/E67/E34/E23/E24/E94/E95)
Bootloader: BOOTLOADER-500-V01.06
A1 SDK: 2.00.16
dev_cap version: V1.1.17
ISP module version: 1.01.20 and A1_ISP: 1.01.20
ECM version: v1.0.0.24
Web UI:  1.00.15
LibHttp: V1.00.35
OpenSSL V1.00.08
LibRtsp V1.00.21
Wan Daemon V1.00.21
Wan Daemon_api V1.00.08
DateTime Daemon V1.00.05
Gsoap library: V6.00.04

******************************************************************************
** Supported Camera List
******************************************************************************
[ EVT2 ]-------------------------------------------------------------------------
-- OV9715 --
	* V1.01.19
		D41/E41A
	* V1.01.16
		D21-A0, E21-A0, D21, E71, D31, E61, E81,
	* Since V1.01.15
		D11, D54, E52, E51, D51, E31, E11, E21, E41, E91, D64, D71, D81,
-- OV5653 --
	* V1.01.19
		R1E D42/E42A/E43A
	* V1.01.16
		D22, E22, D22-A0, E22-A0, D32, E72, E73, E62, E63, E82, E83
	* Since V1.01.15
		E32, E33, E53, E54, E12, E13, D52, E42, E43, D55, E92, D65
-- AR0331 --
	* V1.01.19
		E34,E64/E65,E85/E86 ,E74,E24
	* V1.01.17
		E64, E45, E46
-- IMX-122 --
	* V1.01.19
		E67/D62/E84/E23
	* V1.01.17
		E84, E44
[ EVT1 ]---------------------------------------------------------------------------
-- OV9715 --
	* V1.01.16
		D41, E41A
	* Since V1.01.15
		D11, E11, E31, E52, E71, E51, D51, D31, E61, E81, E41, D71, D81 ,D21, D21-A0 ,E21, E21-A0, D54, D64, E91
-- OV5653 --
	* V1.01.16
		D42, E42A, E43A (R1D)
	* Since V1.01.15
		D32, D12, D52, E12, E13, E32, E33, E53, E54, E72, E73, E42, E43,
		E62, E63, E82, E83, E22, D72, D82, E22, E22-A0, D55, E92, D65
-- AR0331 --
	* V1.01.17
		E24,
	* V1.01.16
		D61, E66
	* Since V1.01.15
		E64, E45,E46,E65,E85,E86 ,E74 ,E34
-- IMX-122 -- ̪n1/8
	* Since V1.01.15
		E84, E23 ,E44 ,E67 ,B93, D62
-- AR0130 --
	* V1.01.17
		E25,
	* Since V1.01.15
		E66 , D61
===============================================================================

[Modified]
	1. Modify runtime lib for encoder, capture fast stop and then start.
	2. If the AE mode is manaul, firmware will auto change WDR level to OFF/disable(0). WDR item will be hidden in the Image tab page.
	3. When the power led default setting is ON, we will turn off the led before the streaming engine ready, and then turn on the led.
	4. Power led procedure will be modified. if the runtime power led is ON, when we detect the reset button is triggered, power led will turn off, otherwise.
	5. FileSystem Ext3 on MicroSD could be mounted.

[Re-test Items]
	1. [Bug 13173] Motion sensitivity 70% --> Motion trigger
	2. [Bug 13287] MJPEG frame
	3. [Bug 13331] D51,RTP,H264,640x480,FPS=3,CBR=28Kbps hframe
	4. [Bug 13731] Encode is MJPEG, live view ɶܤӺCθ
	5. [Bug 14042] ϥVLCRTP over multicast stream1elag Y
	6. [Bug 14049] P@Region & H=>yhtrigger,^ӨStrigger
	7. [Bug 14050] Activity motion SFTriggerI,motion Trigger
	8. [Bug 14052] Trigger ee 1/3=> Motion SQTrigger
	9. [Bug 14155] D51 On/Off Test FAILA200FIAL2C
	10.[Bug 14469] sfirmwareɭ,Camera Web UI||oIELkܺ
	11.[Bug 14475] FrameChecker ,ĿTest Mode, C10suRTP/UDP@, gL8pɫv|db8Ӥpɫee, eW|{bv,v|QYpåBñ
	12.[Bug 14726] E33, E54 and E13 eu when set as RTP, MJPEG and Resolution=2592X1944.
	13.[Bug 14786] RTP Over UDP, continue play 15 hours, stream1 & Stream2 tZWL3
	14.[Bug 14803] ϥIE9,bLiveϥSnapshot,IE|۰
	15.[Bug 14988] Pɶ}IE,åB䤤@IEReboot,bLiveIEv,ߨN쥻Save RebootIEVideo (Power LEDOG۪,٨S),voVideoECMLkXv
	16.[Bug 15083] PAP-5100 Soft PoweronoffOFail,|X{Lk}{H
	17.[Bug 15397] Drop frame when upload video to local storage bYFPS զXU,WL@,SFrame
	18.[Bug 15500] Set schedule to upload images to Local Storage, only upload 3.59%, but show table full in console and login web again=>No files in File Management
	19.[Bug 15745] Setting HTTPS then Fatory default casue camera crash
	20.[Bug 15885] Set schedule to run URL to SAVE_REBOOT, FW crash.
	21.[Bug 15895] In long-running failed connect FTP failed then upload video  to Local Storage, FW crash.
	22.[Bug 16067] Set MJPEG audion__
	23.[Bug 16083] OV5653(5M), Resolution ]̤j, Back to live preview => eO¦
	24.[Bug 16126] WDR cannot work when Exposure mode set to "Manual".
	25.[Bug 16234] Setting Manual shutter speed then save & reboot enter to troubleshooing page
	26.[Bug 15405] Local Storage,when writing file to click Search button,sometimes 1st file cannot display.

[Bug Fixed-RDQ]
	1. #23 Clear OSD Text fail on web UI & URL command
	2. #24 OSD_J"B"ɭPCameraError Loop
	
[Bug Fixed]
	1. [Bug 15415] upload imagelocal storage,LEventImages during Upload Period]h, Camera̦huX5iϤ
	2. [Bug 16235] Manual shutter & shutter speed setting 1/120 then change WDR cause snapshot pop "Error, Get a snapshot" message
	3. [Bug 12654] Changing Video Bit Rate Mode and GOP 1 I-frame makes the video wrong
	4. [Bug 16237] There is error a message after snapshot
	5. [Bug 15407] Link to DUT-A FTP and unmount SD card, cannot unmount but show "Storage can be safely removed" msg.
	6. [Bug 16228] After change device setting, IE pop up troubleshooting page.
	7. [Bug 16305] E46(AR0331)WDR =Disable but save & reboot cause live preview GפP(shutter speed=1/500)
	8.[Bug 16126] WDR cannot work when Exposure mode set to "Manual".
	9.[Bug 15393] On Login plug in SD card cause file system & status display unkown
	10.[Bug 14677] ϥPAP5100(v1.1.7.21)HPresolution զXrun frame check=> Camera crash
	11.[Bug 13383] [ISP-A1]E51bManual Shutter 1/13, |X{Flick
	12.[Bug 14475] FrameChecker ,ĿTest Mode, C10suRTP/UDP@, gL8pɫv|db8Ӥpɫee, eW|{bv,v|QYpåBñ
	13.[Bug 14937] D52 Manual Shutter 1/5, SnapshotϤ,|oIE۰
	14.[Bug 15888] 802.1X state is disable , Web doesn't hide all 802.1X configurations.
	15.[Bug 15878] Shouldn't allow upload 638x479 OSG image to 640x480 video resolution.
	16.[Bug 15877] Upload OSG image to stream1 and stream2, only change stream1 resolution shouldn't remove stream2 OSG image.
	17.[Bug 16625] Date Setting] "Set Manually" , Date: 2025/1/1, ECMWɶ|2023/1/1
	18.[Bug 16618] Only Region 2, Enter motion page again => Can' t Focus on region 2 ɭPActive
	
[Limitation]
	1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
	2. On the platform A1, the H.264 encoding out of the video stream is high profile cause can't be played in the QuickTime.
	3. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and 
	   cause the network to some errors occurred. This case only occurs the the D/N models.
	4. When OSG function is activated, the snapshot always captured image data from channel 1.
	5. Frame Rate about 23 at 1920x1080 in IMX122 camera 
	6. Filesystem on MicroSD is limited to Ext4
########################################################################
########################################################################
A1D-500-V6.03.05
2013/03/07

Purpose: EE EVT / SBA firmware. (models include: D62/E64/E67/E34/E23/E24)
Bootloader: BOOTLOADER-500-V01.06
A1 SDK: 2.00.15
dev_cap version: V1.1.16
ISP module version: 1.01.19 and A1_ISP: 1.01.19
ECM version: v1.0.0.24
Web UI:  1.00.15
LibHttp: V1.00.35
OpenSSL V1.00.08
LibRtsp V1.00.21
Wan Daemon V1.00.21
Wan Daemon_api V1.00.08
DateTime Daemon V1.00.05
Gsoap library: V6.00.04

******************************************************************************
** Supported Camera List
******************************************************************************
[ EVT2 ]-------------------------------------------------------------------------
-- OV9715 --
	* V1.01.19
		D41/E41A
	* V1.01.16
		D21-A0, E21-A0, D21, E71, D31, E61, E81,
	* Since V1.01.15
		D11, D54, E52, E51, D51, E31, E11, E21, E41, E91, D64, D71, D81,
-- OV5653 --
	* V1.01.19
		R1E D42/E42A/E43A
	* V1.01.16
		D22, E22, D22-A0, E22-A0, D32, E72, E73, E62, E63, E82, E83
	* Since V1.01.15
		E32, E33, E53, E54, E12, E13, D52, E42, E43, D55, E92, D65
-- AR0331 --
	* V1.01.19
		E34,E64/E65,E85/E86 ,E74,E24
	* V1.01.17
		E64, E45, E46
-- IMX-122 --
	* V1.01.19
		E67/D62/E84/E23
	* V1.01.17
		E84, E44
[ EVT1 ]---------------------------------------------------------------------------
-- OV9715 --
	* V1.01.16
		D41, E41A
	* Since V1.01.15
		D11, E11, E31, E52, E71, E51, D51, D31, E61, E81, E41, D71, D81 ,D21, D21-A0 ,E21, E21-A0, D54, D64, E91
-- OV5653 --
	* V1.01.16
		D42, E42A, E43A (R1D)
	* Since V1.01.15
		D32, D12, D52, E12, E13, E32, E33, E53, E54, E72, E73, E42, E43,
		E62, E63, E82, E83, E22, D72, D82, E22, E22-A0, D55, E92, D65
-- AR0331 --
	* V1.01.17
		E24,
	* V1.01.16
		D61, E66
	* Since V1.01.15
		E64, E45,E46,E65,E85,E86 ,E74 ,E34
-- IMX-122 -- ̪n1/8
	* Since V1.01.15
		E84, E23 ,E44 ,E67 ,B93, D62
-- AR0130 --
	* V1.01.17
		E25,
	* Since V1.01.15
		E66 , D61
===============================================================================
[Modified]
	1. Modify runtime lib for encoder, capture fast stop and then start.
	2. If the AE mode is manaul, firmware will auto change WDR level to OFF/disable(0). WDR item will be hidden in the Image tab page.
	3. When the power led default setting is ON, we will turn off the led before the streaming engine ready, and then turn on the led.

[Re-test Items]
	1. [Bug 13173] Motion sensitivity 70% --> Motion trigger
	2. [Bug 13287] MJPEG frame
	3. [Bug 13331] D51,RTP,H264,640x480,FPS=3,CBR=28Kbps hframe
	4. [Bug 13731] Encode is MJPEG, live view ɶܤӺCθ
	5. [Bug 14042] ϥVLCRTP over multicast stream1elag Y
	6. [Bug 14049] P@Region & H=>yhtrigger,^ӨStrigger
	7. [Bug 14050] Activity motion SFTriggerI,motion Trigger
	8. [Bug 14052] Trigger ee 1/3=> Motion SQTrigger
	9. [Bug 14155] D51 On/Off Test FAILA200FIAL2C
	10.[Bug 14469] sfirmwareɭ,Camera Web UI||oIELkܺ
	11.[Bug 14475] FrameChecker ,ĿTest Mode, C10suRTP/UDP@, gL8pɫv|db8Ӥpɫee, eW|{bv,v|QYpåBñ
	12.[Bug 14726] E33, E54 and E13 eu when set as RTP, MJPEG and Resolution=2592X1944.
	13.[Bug 14786] RTP Over UDP, continue play 15 hours, stream1 & Stream2 tZWL3
	14.[Bug 14803] ϥIE9,bLiveϥSnapshot,IE|۰
	15.[Bug 14988] Pɶ}IE,åB䤤@IEReboot,bLiveIEv,ߨN쥻Save RebootIEVideo (Power LEDOG۪,٨S),voVideoECMLkXv
	16.[Bug 15083] PAP-5100 Soft PoweronoffOFail,|X{Lk}{H
	17.[Bug 15397] Drop frame when upload video to local storage bYFPS զXU,WL@,SFrame
	18.[Bug 15500] Set schedule to upload images to Local Storage, only upload 3.59%, but show table full in console and login web again=>No files in File Management
	19.[Bug 15745] Setting HTTPS then Fatory default casue camera crash
	20.[Bug 15885] Set schedule to run URL to SAVE_REBOOT, FW crash.
	21.[Bug 15895] In long-running failed connect FTP failed then upload video  to Local Storage, FW crash.
	22.[Bug 16067] Set MJPEG audion__
	23.[Bug 16083] OV5653(5M), Resolution ]̤j, Back to live preview => eO¦
	24.[Bug 16126] WDR cannot work when Exposure mode set to "Manual".
	25.[Bug 16234] Setting Manual shutter speed then save & reboot enter to troubleshooing page
	26.[Bug 15405] Local Storage,when writing file to click Search button,sometimes 1st file cannot display.
		
[Bug Fixed]
	1. [Bug 15415] upload imagelocal storage,LEventImages during Upload Period]h, Camera̦huX5iϤ
	2. [Bug 16235] Manual shutter & shutter speed setting 1/120 then change WDR cause snapshot pop "Error, Get a snapshot" message
	3. [Bug 12654] Changing Video Bit Rate Mode and GOP 1 I-frame makes the video wrong
	4. [Bug 16237] There is error a message after snapshot
	5. [Bug 15407] Link to DUT-A FTP and unmount SD card, cannot unmount but show "Storage can be safely removed" msg.
	6. [Bug 16228] After change device setting, IE pop up troubleshooting page.
	7. [Bug 16305] E46(AR0331)WDR =Disable but save & reboot cause live preview GפP(shutter speed=1/500)
	8.[Bug 16126] WDR cannot work when Exposure mode set to "Manual".
	9.[Bug 15393] On Login plug in SD card cause file system & status display unkown
	10.[Bug 14677] ϥPAP5100(v1.1.7.21)HPresolution զXrun frame check=> Camera crash
	11.[Bug 13383] [ISP-A1]E51bManual Shutter 1/13, |X{Flick
	12.[Bug 14475] FrameChecker ,ĿTest Mode, C10suRTP/UDP@, gL8pɫv|db8Ӥpɫee, eW|{bv,v|QYpåBñ
	13.[Bug 14937] D52 Manual Shutter 1/5, SnapshotϤ,|oIE۰
	14.[Bug 15888] 802.1X state is disable , Web doesn't hide all 802.1X configurations.
	15.[Bug 15878] Shouldn't allow upload 638x479 OSG image to 640x480 video resolution.
	16.[Bug 15877] Upload OSG image to stream1 and stream2, only change stream1 resolution shouldn't remove stream2 OSG image.
	17.[Bug 16625] Date Setting] "Set Manually" , Date: 2025/1/1, ECMWɶ|2023/1/1
	18.[Bug 16618] Only Region 2, Enter motion page again => Can' t Focus on region 2 ɭPActive
	
[Limitation]
	1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
	2. On the platform A1, the H.264 encoding out of the video stream is high profile cause can't be played in the QuickTime.
	3. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and 
	   cause the network to some errors occurred. This case only occurs the the D/N models.
	4. When OSG function is activated, the snapshot always captured image data from channel 1.
	5. Frame Rate about 23 at 1920x1080 in IMX122 camera 
	6. Filesystem on MicroSD is limited to Ext4
########################################################################
########################################################################
A1D-500-V6.03.04
2013/02/06

Purpose: Release SBA firmware for Nuuo
Bootloader: BOOTLOADER-500-V01.06
A1 SDK: 2.00.14
dev_cap version: V1.1.14
ISP module version: 1.01.18 and A1_ISP: 1.01.18
ECM version: v1.0.0.23
Web UI:  1.00.14
LibHttp: V1.00.35
OpenSSL V1.00.08
LibRtsp V1.00.15
Wan Daemon V1.00.20
Wan Daemon_api V1.00.08
DateTime Daemon V1.00.05
Gsoap library: V6.00.04


******************************************************************************
** Supported Camera List
******************************************************************************

==============================================================================
[Modified]
	1. Modify runtime lib for encoder, capture fast stop and then start.
	
[Bug Fixed]
	1. [Bug 15415] upload imagelocal storage,LEventImages during Upload Period]h, Camera̦huX5iϤ
	
[Limitation]
	1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
	2. On the platform A1, the H.264 encoding out of the video stream is high profile cause can't be played in the QuickTime.
	3. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and 
	   cause the network to some errors occurred. This case only occurs the the D/N models.
	4. When OSG function is activated, the snapshot always captured image data from channel 1.
########################################################################
########################################################################
A1D-500-V6.03.03
2013/02/04
Purpose: EE EVT testing for E44, E45, E46 models. 

Bootloader: BOOTLOADER-500-V01.06
A1 SDK: 2.00.13
dev_cap version: V1.1.14
ISP module version: 1.01.18 and A1_ISP: 1.01.18
ECM version: v1.0.0.23
Web UI:  1.00.14
LibHttp: V1.00.35
OpenSSL V1.00.08
LibRtsp V1.00.15
Wan Daemon V1.00.20
Wan Daemon_api V1.00.08
DateTime Daemon V1.00.05
Gsoap library: V6.00.04

******************************************************************************
** Supported Camera List
******************************************************************************
[ EVT2 ]
-- OV9715 --
	* V1.01.16
		D21-A0, E21-A0, D21,
		E71, D31, E61, E81,
	* Since V1.01.15
		D11, D54, E52, E51, D51, E31, E11, E21, E41,
		E91, D64, D71, D81,
-- OV5653 --
	* V1.01.16
		D22, E22
		D22-A0, E22-A0
		D32, E72, E73, E62, E63, E82, E83
	* Since V1.01.15
		E32, E33, E53, E54, E12, E13, D52, E42, E43.
		D55, E92, D65
-- AR0331 --
	* V1.01.17
		E64,
-- IMX-122 --
	* V1.01.17
		E84,
[ EVT1 ]
-- OV9715 --
	* V1.01.16
		D41, E41A
	* Since V1.01.15
		D11, E11, E31, E52, E71, E51, D51, D31, E61, E81, E41, D71,
		D81 ,D21, D21-A0 ,E21, E21-A0, D54, D64, E91
	-- OV5653 --
	* V1.01.16
		D42, E42A, E43A (R1D)
	* Since V1.01.15
		D32, D12, D52, E12, E13, E32, E33, E53, E54, E72, E73, E42, E43,
		E62, E63, E82, E83, E22, D72, D82, E22, E22-A0, D55, E92, D65
	-- AR0331 --
	* V1.01.17
		E24,E25
* V1.01.16
D61, E66
* Since V1.01.15
E64, E45,E46,E65,E85,E86 ,E74 ,E34
-- IMX-122 -- ̪n 1/8
* Since V1.01.15
E84, E23 ,E44 ,E67 ,B93, D62
-- AR0130 --
* Since V1.01.15
E66 , D61
==============================================================================
[New Feature]
	1. support variable GOP in CBR
	2. Modify ISP BitRate notify to use 60/50 based factor. The firmware can be calculated for more accurate fps.
	
[Modified]

[Bug Fixed]
	1. [Bug 15986] Manual shutter 1/5,5~6Snapshot,|X{@쪺Ϥ|O0KB,ϤLk}
	2. [Bug 15891] 2048x1536 after save & reboot snapshot result fail
	3. [Bug 16022] Set camera encode type is "MJPEG" and switch live view mode page then Demo Tool display green and purple screen.
	4. [Bug 15917] 802.1X User & Account ~iHsu\
	5. [Bug 16087] D72/D71 Mirror/Flipping default ~
	6. [Bug 15947] The UI of Day Night thread and function are opposite.
	7. [Bug 15744] Local stroage snapshot stream 2=> Privacy mask mPLive preview P
	8. [Bug 15881] Cannot upload snapshot to Local Storage and FTP at same time.
	9. [Bug 15398] SwզX resolution ocan't keep FPS after save & reboot
	
[Limitation]
	1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
	2. On the platform A1, the H.264 encoding out of the video stream is high profile cause can't be played in the QuickTime.
	3. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and 
	   cause the network to some errors occurred. This case only occurs the the D/N models.
	4. When OSG function is activated, the snapshot always captured image data from channel 1.
########################################################################
########################################################################
A1D-500-V6.03.02
2013/01/30
Purpose: EE EVT / SBA firmware. 
(models include: D21,D21-A0,E21,E21-A0,D22,D22-A0,E22,E22-A0,D41,E41A,E41,D42,E42,E42A,E43,E43A,D61,E66,D71,D72,E65,E74,E84,E85,E86,E44,E45,E46)
Bootloader: BOOTLOADER-500-V01.06
A1 SDK: 2.00.12
dev_cap version: V1.1.13
ISP module version: 1.01.16 and A1_ISP: 1.01.16
ECM version: v1.0.0.22
Web UI:  1.00.14
LibHttp: V1.00.35
OpenSSL V1.00.08
LibRtsp V1.00.15
Wan Daemon V1.00.20
Wan Daemon_api V1.00.08
DateTime Daemon V1.00.05
Gsoap library: V6.00.04

******************************************************************************
** Supported Camera List
******************************************************************************
[ EVT2 ]
-- OV9715 --
	* V1.01.16
		D21-A0, E21-A0, D21,
		E71, D31, E61, E81,
	* Since V1.01.15
		D11, D54, E52, E51, D51, E31, E11, E21, E41,
		E91, D64, D71, D81,
-- OV5653 --
	* V1.01.16
		D22, E22
		D22-A0, E22-A0
		D32, E72, E73, E62, E63, E82, E83
	* Since V1.01.15
		E32, E33, E53, E54, E12, E13, D52, E42, E43.
		D55, E92, D65
-- AR0331 --
	None,
[ EVT1 ]
-- OV9715 --
	* V1.01.16
		D41, E41A
	* Since V1.01.15
		D11, E11, E31, E52, E71, E51, D51, D31, E61, E81, E41, D71,
		D81 ,D21, D21-A0 ,E21, E21-A0, D54, D64, E91
	-- OV5653 --
	* V1.01.16
		D42, E42A, E43A (R1D)
	* Since V1.01.15
		D32, D12, D52, E12, E13, E32, E33, E53, E54, E72, E73, E42, E43,
		E62, E63, E82, E83, E22, D72, D82, E22, E22-A0, D55, E92, D65
	-- AR0331 --
	* V1.01.16
		D61, E66
	* Since V1.01.15
		E64, E45,E46,E65,E85,E86 ,E74 ,E34
	-- IMX-122 -- ̪n1/8
	* Since V1.01.15
		E84, E23 ,E44 ,E67 ,B93, D62
	-- AR0130 --
	* Since V1.01.15
		E66 , E24 ,D61
==============================================================================
[New Feature]
	1. support variable GOP in CBR
	
[Modified]

[Bug Fixed]
	1. [Bug 15986] Manual shutter 1/5,5~6Snapshot,|X{@쪺Ϥ|O0KB,ϤLk}
	2. [Bug 15891] 2048x1536 after save & reboot snapshot result fail
	3. [Bug 16022] Set camera encode type is "MJPEG" and switch live view mode page then Demo Tool display green and purple screen.
	4. [Bug 15917] 802.1X User & Account ~iHsu\
	5. [Bug 16087] D72/D71 Mirror/Flipping default ~
	6. [Bug 15947] The UI of Day Night thread and function are opposite.
	7. [Bug 15744] Local stroage snapshot stream 2=> Privacy mask mPLive preview P
	8. [Bug 15881] Cannot upload snapshot to Local Storage and FTP at same time.
	9. [Bug 15398] SwզX resolution ocan't keep FPS after save & reboot
	
[Limitation]
	1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
	2. On the platform A1, the H.264 encoding out of the video stream is high profile cause can't be played in the QuickTime.
	3. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and 
	   cause the network to some errors occurred. This case only occurs the the D/N models.
	4. When OSG function is activated, the snapshot always captured image data from channel 1.
########################################################################
########################################################################
A1D-500-V6.03.01
2013/01/16

Bootloader: BOOTLOADER-500-V01.06
A1 SDK: 2.00.12
dev_cap version: V1.1.08
ISP module version: 1.01.13 and A1_ISP: 1.01.13
ECM version: v1.0.0.22
Web UI:  1.00.13
LibHttp: V1.00.35
OpenSSL V1.00.08
LibRtsp V1.00.15
Wan Daemon V1.00.20
Wan Daemon_api V1.00.08
DateTime Daemon V1.00.05
Gsoap library: V6.00.04

******************************************************************************
** Supported Camera List
******************************************************************************
[ Video Quality Ready ]
-- OV9715 --
D11, D54, E52, E51, D51, E31, E11, E21, E41,
E91, D64
-- OV5653 --
E32, E33, E53, E54, E12, E13, D52, E42, E43.
D55, E92, D65
-- AR0331 --
None,
[ Driver Function Ready ONLY !!!! ]
-- OV9715 --
D11, E21, E11, E31, E52, E71, E51, D51, D31, E61, E81, E41, D71,
D81 ,D21, D21-A0 ,E21, E21-A0, D54, D64, E91
-- OV5653 --
D32, D12, D52, E12, E13, E32, E33, E53, E54, E72, E73, E42, E43,
E62, E63, E82, E83, E22, D72, D82, E22, E22-A0, D55, E92, D65
-- AR0331 --
E64, E45,E46,E65,E85,E86 ,E74 ,E34
-- IMX-122 -- ̪n1/8
E84, E23 ,E44 ,E67 ,B93, D62
-- AR0130 --
E66 , E24 ,D61
==============================================================================
[New Feature]
	1. Serials number in some camera models are changed. 
	   Priority Models : D54,D55,D31,D32,E91,E92,E61,E62,E63,D64,D65,E71,E72,E73,D71,D72,E81,E82,E83,D81,D82
	2. update clock settings of AR0130 sensor in MACDEV
	
[Modified]
	1. Motion/Masking behavior will follow PlatformA,T,K design, not do scaling depends on resolution change anymore.

[Bug Fixed]
	1. [Bug 15735] Link to DUT-A FTP and Scan SD card, after that, failed to upload files to Local Storage
	2. [Bug 15734] Please remove unsupport URL VIDEO_TOS_PRIORITY=Minimize-Cost. 
	3. [Bug 15746] Log in Web by Https, it doesn't download ECM to install.
	4. [Bug 15899] First send URL EVENT_RSPIMG1, URL^ȷ|Email
	5. [Bug 15930] "Reset image settings to default" ]tAdvanced WDR
	6. [Bug 15416] E55ä䴩DIO, Local Storage SearchDIsﶵ
	7. [Bug 15738] Click Test button, please don't close dialog box.
	8. [Bug 15753] System Info could be empty by pressing Esc button
	9. [Bug 15879] Cannot clean Event server FTP settings.
	10.[Bug 15880] The color of FTP port value, default should be gray.
	11.[Bug 15883] Set Event list, close warning msg, please don' t exit current page.
	12.[Bug 15898] SMTP Server Configuration,  Authentication Type]wNone,  ˬdUser Name/User Password
	13.[Bug 15874] Privacy Mask m|bvideo resolution ɭԵuȶ]
	14.[Bug 15875] Cannot keep Privacy mask position after changing resolution.
	15.[Bug 15892] 2048x1536 set Privacy mask ഫ640x480WUط|Q=> yprivacy mask , @½usb
	16.[Bug 15903] DUT-A with Static IP will become default Date & Time after Save & Reboot
	17.[Bug 15741] Change resolution,1920x1080->2048x1536-> 1920x1080, the position of motion Region will be changed.
	18.[Bug 15751] Enable FlipMirror, Motion Regionm|Pҳ]wP(^̤jResolition Defaultm)
	19.[Bug 15749] Del ECM then setup DUT-A again check folder file, it doesn't exist but preview is fine
	
[Limitation]
	1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
	2. On the platform A1, the H.264 encoding out of the video stream is high profile cause can't be played in the QuickTime.
	3. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and 
	   cause the network to some errors occurred. This case only occurs the the D/N models.
	4. When OSG function is activated, the snapshot always captured image data from channel 1.
########################################################################
########################################################################
A1D-500-V6.03.00
2013/01/14
Purpose: HW EVT validation.

Bootloader: BOOTLOADER-500-V01.06
A1 SDK: 2.00.12
dev_cap version: V1.1.07
ISP module version: 1.01.13 and A1_ISP: 1.01.13
ECM version: v1.0.0.21
Web UI:  1.00.12
LibHttp: V1.00.33
OpenSSL V1.00.07
LibRtsp V1.00.15
Wan Daemon V1.00.20
Wan Daemon_api V1.00.08
DateTime Daemon V1.00.05
Gsop library: V6.00.02

[New Feature]
	1. Serials number in some camera models are changed. 
	   Priority Models : D53,D54,D31,D32,E55,E56,E61,E62,E63,D61,D62,E71,E72,E73,D71,D72,E81,E82,E83,D81,D82,E44,E45,E46
	
[Modified]

[Bug Fixed]
	1. [Bug 15740] Cannot set  the OEM SERIAL_NUM\MODEL_NAME\MODEL_DESC to NULL data.
	2. [Bug 15736] Scan Unknown SD card, no warning msg and the disk formatted to Ext4 type.
	3. [Bug 15737] Mount Unknown SD card, file Management shouldn't become enable.
	4. [Bug 15752] bSD Card榡ƦEXT4(EXT3)e, Unmount Storage MediaButtonܦMount
	5. [Bug 15754] JFAT32SD Card,ùMount,榡ƫeSD CardiHQgJɮ
	
[Limitation]
	1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
	2. On the platform A1, the H.264 encoding out of the video stream is high profile cause can't be played in the QuickTime.
	3. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and 
	   cause the network to some errors occurred. This case only occurs the the D/N models.
	4. When OSG function is activated, the snapshot always captured image data from channel 1.
########################################################################
########################################################################
A1D-500-V6.02.03
2012/12/28

SVN Revision: 
Bootloader: BOOTLOADER-500-V01.06
A1 SDK: 2.00.11
dev_cap version: V1.1.07
ISP module version: 1.01.11 and A1_ISP: 1.01.11
ECM version: v1.0.0.21
Web UI:  1.00.11
LibHttp: V1.00.33
OpenSSL V1.00.07
LibRtsp V1.00.15
Wan Daemon V1.00.20
Wan Daemon_api V1.00.08
DateTime Daemon V1.00.05
Gsop library: V6.00.02

[New Feature]
	1. allow anonymous login and preview. add GUEST_PREVIEW URL CMD.
	2. Support the Troubleshooting page when the streaming server cash occurred.
	3. Local Storage function ready.
	4. Support the Advanced WDR function to all camera models, except Dxx models.
	5. support ONVIF service.
	
[Modified]
	1. Change the bitrate don't need to stop encoder.

[Bug Fixed]
	1. [Bug 15408] Troubleshooting pageܿ "3. Perform factory default but keep current networking settngs and reboot" ,|yCameraLk}
	2. [Bug 15399] Set Event to upload snapshot to Local Storage when Reboot, after SAVE&Reboot,cannot log in Device.
	3. [Bug 15413] WcGet Streamsu,|yFW Crash
	4. [Bug 15400] Keep HTTP/HTTPS port to factory default cause enter to Troubleshooting page
	5. [Bug 15401] System infomation e̩ݦhXF@Ů.
	6. [Bug 15403] In Local Storage\File Management, enlarge image without scroll bar to display whole image.
	7. [Bug 15402] In Event setting db,click "Apply" button the db should be closed.
	8. [Bug 15417] Advanced WDR default setting and WDR UI settings doesn' t identical with the Spec.
	9. [Bug 15389] When formatting , Live button didn't disable
	10. [Bug 15395] The table of "File Management" doesn't align.
	11. [Bug 15409] Guest preview,  LiveAudio in /  outButton|Q
	12. [Bug 15416] E55ä䴩DIO,  Local Storage SearchDIsﶵ
	13. [Bug 15390] Scan or format finish,  Web UI ʤ֤F"show log" button
	14. [Bug 15508] Disable Bonjour but BonjourM椤DUT-A's name
	15. [Bug 15410] ]wPPPoE, }, SWWPPPoE, Camera|PPPoE IP
	16. [Bug 15507] I802. 1XApply, |CameraiJtroubleshooting page
	17. [Bug 15506] Advanced WDR]wDsiabled, etϰ줣|ܶ,  åBVIDEO_WDR^ǪȤ]OWҳ]wѼ
	18. [Bug 15504] Can't keep advanced WDR setting
	19. [Bug 15503] File Management Web UI problem after enlarge image file.
	20. [Bug 15502] The upload image, naming rule is different with the example naming rule
	21. [Bug 15414] Camera Connection Type]Dynamic IP Address,ҨSDHCP Server, Local Storagev
	22. [Bug 15396] Remove HTTPS Certificate Management in https://IP:Port/ web page, IE should auto logout.
	23. [Bug 15411] E12/13 apply Mirror\Flip, the brightness looks increase
	24. [Bug 15394] Frame rate VC=>Use mouse to scoll up/down cause live preview uȥX{{{ blue/black e
	25. [Bug 15392] When scanned completely, the disc should be mounted automatically. The Mount button status is wrong.
	26. [Bug 15406] The uploading video to Local Storage stopped, after Save&Reboot, it shows troubleshooting page. 
	
[Limitation]
	1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
	2. On the platform A1, the H.264 encoding out of the video stream is high profile cause can't be played in the QuickTime.
	3. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and 
	   cause the network to some errors occurred. This case only occurs the the D/N models.
	4. When OSG function is activated, the snapshot always captured image data from channel 1.
########################################################################
########################################################################
A1D-500-V6.02.02
2012/12/11

SVN Revision: 
Bootloader: BOOTLOADER-500-V01.06
A1 SDK: 2.00.10
dev_cap version: V1.1.04
ISP module version: 1.01.10 and A1_ISP: 1.01.10
ECM version: v1.0.0.20
Web UI:  1.00.10
LibHttp: V1.00.33
OpenSSL V1.00.06
LibRtsp V1.00.15
Wan Daemon V1.00.15
Wan Daemon_api V1.00.08
DateTime Daemon V1.00.05

[New Feature]
	1. allow anonymous login and preview. add GUEST_PREVIEW URL CMD.
	2. Support the Troubleshooting page when the streaming server cash occurred.
	3. Local Storage function ready.
	4. Support the Advanced WDR function to all camera models, except Dxx models.
	
[Modified]
	1. Adding msg to SYSTEM_LOG while boot or insert sd (More detail ref SYSTEM_LOG spec.)
	2. The Motion region, OSD and Privacy mask region calculation from the ISP's algorithm.

[Bug Fixed]
	1. #14452 Switch to stream2, the "Talk to Camera" button is still on, but no sound.
	2. #14466 Live resolution(640x480) ̤iHݨOSG image(640x480)
	3. #14847 Don' t allow user to key in charaters over 63 bytes in E-Mail Recipients of Upload video /snapshot and Audio.
	4. #14467 802.1X password unJ =  |᭱r
	5. #14782 Eventnaming rule, 䤤%Ww󴫬 "_ " ,Postfix of Naming Rule Wg " "
	6. #14462 bNo Audio,  Web UI Event Configuration,  ĳAudior
	7. #14465 Stream 2]640x360yCan' t see the OSD when OSD position ]button
	8. #14463 SnapshotϤ, ^UӪϤ ,ä|OSG
	9. #14679 WOSGϤep638*478, WǫϤ|ܧ
	10.#14794 Use PPPoE to connect DUT-A, After Factory default ( Preserve. network..) => Can't get the PPPoe IP Address
	11.#14795 ϥSDK play HTTP_WOC_PREVIEW ɭPAudio 
	12.#14783 sManual Event, Sj5
	13.#15041 Event ConfigurationSend URL commands Apply Buttonܲ`
	14.#14796 When User name & Root name same as other user didn't pop warning message
	15.#14789 The settings of Speed & Duplex cannot work after save&reboot.
	16.#14678 bFWCrash, IEX{Troubleshooting
	17.#14493 Change resolution and save reboot, privacy mask size and position are incorrect.
	18.#14787 Apply Mirror&Flip, the motion detection region will be changed after changing resolution.

[Limitation]
	1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
	2. On the platform A1, the H.264 encoding out of the video stream is high profile cause can't be played in the QuickTime.
	3. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and 
	   cause the network to some errors occurred. This case only occurs the the D/N models.
	4. When OSG function is activated, the snapshot always captured image data from channel 1.
########################################################################
########################################################################
A1D-500-V6.01.06
2012/11/02

SVN Revision: 
Bootloader: BOOTLOADER-500-V01.06
A1 SDK: 2.00.09
dev_cap version: V1.0.26
ISP module version: 1.00.28 and A1_ISP: 1.00.21
ECM version: v1.0.0.19
Web UI:  1.00.09
LibHttp: V1.00.33
OpenSSL V1.00.06
LibRtsp V1.00.13
Wan Daemon V1.00.12
Wan Daemon_api V1.00.08
DateTime Daemon V1.00.05

[New Feature]
	1. Removed streaming server monitor function for Troubleshooting.
	
[Modified]
	1. Change pll0 to 70 when use macdev URL setting serial.
	2. SDK: Change nand command address cycle from 5 to 4.
	3. SDK: Modify nand flash interface change busy time from 100 to 90.
	4. SDK: Capture frame abnormal at the reboot stage 
			soc_camera_dqbuf not check videobuf_dqbuf return error.
	5. SDK: Disable auto power saving of PHY
	6. Due to our streaming monitor might monitor to unexpected errors and then invoke error looping stage when using the wget tool, therefore we change another monitoring method to fix this problem.
	
[Bug Fixed]
	1. #14067 Value of setting will be changed or become empty in HTTP Server Configuration after clicking Apply
	2. #14601 OV5653 modelbresolution640x480(dual streamOVGA)AshutterC1/30ɡAflip enablee|`
	3. #14472 [Reproduce rate: 1/50]bAuto detection ɤresotuion WvWcyLIVE PREVIEW stream2 e_u
	4. #14468 bWindows 7IPv6, åBAudio FormatPCM/G711A , AdapterTesterLkťCamera Audio Inn

[Limitation]
	1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
	2. On the platform A1, the H.264 encoding out of the video stream is high profile cause can't be played in the QuickTime.
	3. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and 
	   cause the network to some errors occurred. This case only occurs the the D/N models.
########################################################################
########################################################################
A1D-500-V6.01.05
2012/11/01

SVN Revision: 10704
Bootloader: BOOTLOADER-500-V01.06
A1 SDK: 2.00.09
dev_cap version: V1.0.26
ISP module version: 1.00.28 and A1_ISP: 1.00.21
ECM version: v1.0.0.19
Web UI:  1.00.09
LibHttp: V1.00.33
OpenSSL V1.00.06
LibRtsp V1.00.13
Wan Daemon V1.00.12
Wan Daemon_api V1.00.08
DateTime Daemon V1.00.05

[New Feature]
	1. Support the Troubleshooting page when the streaming server cash occurred.
	
[Modified]
	1. Change pll0 to 70 when use macdev URL setting serial.
	2. SDK: Change nand command address cycle from 5 to 4.
	3. SDK: Modify nand flash interface change busy time from 100 to 90.
	4. SDK: Capture frame abnormal at the reboot stage 
			soc_camera_dqbuf not check videobuf_dqbuf return error.
	5. SDK: Disable auto power saving of PHY
	6. Due to our streaming monitor might monitor to unexpected errors and then invoke error looping stage when using the wget tool, therefore we change another monitoring method to fix this problem.
	
[Bug Fixed]
	1. #14067 Value of setting will be changed or become empty in HTTP Server Configuration after clicking Apply
	2. #14601 OV5653 modelbresolution640x480(dual streamOVGA)AshutterC1/30ɡAflip enablee|`
	3. #14472 [Reproduce rate: 1/50]bAuto detection ɤresotuion WvWcyLIVE PREVIEW stream2 e_u
	4. #14468 bWindows 7IPv6, åBAudio FormatPCM/G711A , AdapterTesterLkťCamera Audio Inn

[Limitation]
	1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
	2. On the platform A1, the H.264 encoding out of the video stream is high profile cause can't be played in the QuickTime.
	3. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and 
	   cause the network to some errors occurred. This case only occurs the the D/N models.
########################################################################
########################################################################
A1D-500-V6.01.04
2012/10/31

SVN Revision: 10697
Bootloader: BOOTLOADER-500-V01.06
A1 SDK: 2.00.09
dev_cap version: V1.0.26
ISP module version: 1.00.28 and A1_ISP: 1.00.21
ECM version: v1.0.0.19
Web UI:  1.00.09
LibHttp: V1.00.33
OpenSSL V1.00.06
LibRtsp V1.00.13
Wan Daemon V1.00.12
Wan Daemon_api V1.00.08
DateTime Daemon V1.00.05

[New Feature]
	1. Support the Troubleshooting page when the streaming server cash occurred.
	
[Modified]
	1. Change pll0 to 70 when use macdev URL setting serial.
	2. SDK: Change nand command address cycle from 5 to 4.
	3. SDK: Modify nand flash interface change busy time from 100 to 90.
	4. SDK: Capture frame abnormal at the reboot stage 
			soc_camera_dqbuf not check videobuf_dqbuf return error.
	5. SDK: Disable auto power saving of PHY
	
[Bug Fixed]
	1. #14067 Value of setting will be changed or become empty in HTTP Server Configuration after clicking Apply
	2. #14601 OV5653 modelbresolution640x480(dual streamOVGA)AshutterC1/30ɡAflip enablee|`
	3. #14472 [Reproduce rate: 1/50]bAuto detection ɤresotuion WvWcyLIVE PREVIEW stream2 e_u
	4. #14468 bWindows 7IPv6, åBAudio FormatPCM/G711A , AdapterTesterLkťCamera Audio Inn

[Limitation]
	1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
	2. On the platform A1, the H.264 encoding out of the video stream is high profile cause can't be played in the QuickTime.
	3. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and 
	   cause the network to some errors occurred. This case only occurs the the D/N models.
########################################################################
########################################################################
A1D-500-V6.01.03
2012/10/11

SVN Revision: 10527
Bootloader: BOOTLOADER-500-V01.05
A1 SDK: 2.00.07
dev_cap version: V1.0.26
ISP module version: 1.00.27 and A1_ISP: 1.00.19
ECM version: v1.0.0.19
Web UI:  1.00.08
LibHttp: V1.00.33
OpenSSL V1.00.06
LibRtsp V1.00.13
Wan Daemon V1.00.12
Wan Daemon_api V1.00.07
DateTime Daemon V1.00.05

[New Feature]
	1. Support IPV6 on RTSP/RTP streaming.
	
[Bug Fixed]
	1. #14043 When Save & Reboot--> Can't Keep OSD option
	2. #14045 Change ratio cause åBNprivacy mask Ԧ̤ܳj,ɦܵLkAܮؤjp
	3. #14046 Color is red & privacy mask Ԧ̤ܳj=> pop "Error. Invalid settings."
	4. #14047 Can't keep Privacy mask after save & reboot
	5. #14048 When disable privacy mask then enable again => fail
	6. #14063 Can't input allowed characters from Spec in User Name in IEEE 802.1X
	7. #14064 Can't remove files from IEEE 802.1X
	8. #14065 Can't input 63 characters in User Name of SMTP Server Configuration in Event Server
	9. #14067 Value of setting will be changed or become empty in HTTP Server Configuration after clicking Apply
	10.#14068 There is no Upload Path in E-Mail of Upload video/snapshot in Event Configuration
	11.#14069 ϥUser AccountUser1~User8NbJAWeb UIULLive VieweAB\Cܲ`
	12.#14070 The first character in the file name and upload path of Event Configuration can be "%"
	13.#14071 ϥUser Account]wUser1~User8NbKXALkMUser1~8bKX
	14.#14074 System InfoդAϥUrl"http://IP/cgi-bin/update?USER=user3&PWD=user3&SERVER_REPORT"աA^ȻPTest CasePA
			  "ERROR: SERVER_REPORT not find"ATest Case"ErrorGnot authorized"
	15.#14075 ϥD51(OV9715)1MAHSDK(CONTACT_TYPE_UNICAST_PREVIEW)ɡAϥUrlܧResolution(VIDEO_RESOLUTION / V2_VIDEO_RESOLUTION)ɡASDKeL_
	16.#14079 ]wPrivacy MaskNϰALive ViewUSnapshotAUӤӤõLMaskϰ
	17.#13619 LAudioSystem InfoAudio TypeAѼܬPCM
	18.#14100 Audio format lost G711A & G711U
	19.#13293 RTSP authentication item can't change to disable
	20.#14077 Input invalid character didn't pop warning message windows
	21.#14082 ϥOSD\A]w@OSD Region(1~4)APositionBottomAFormat of Texts]wNȡAiJLive VieweAIPlay video
			  stream2ALkùUX{]wTC
	22.#14084 Exposure Mode]Manual, Shutter Speed]1/5,LkϥSnapshot, Exposure Mode]Auto,æbLow Light,]|D
	23.#14110 D52 MJPEG, FPS5|hframe
	24.#13629 E31 Disable Flip,eݨ쪺P
	25.#14154 URL DAY_NIGHT_STATE^,PDay/Night Mode
	26.#13471  Exposure mode bAuto mode ]wshutter speed Pȳymanual mode U, oetפP
	27.#13570 URL DAYLIGHT_SAVING_CONFIG=1,2,8,1,03:00,1,12,1,23:00,7 ,UI Day Light SavingStart Timeɶ|ť
	28.#13641 PPPoE User Name Naming RuleSFollow SPEC "Valid Character in Login Password"
	29.#14078 Input invalid Ip address or Netmask->Get error message ۤ
	30.#14136 Day/Night mode ]wDay=>UIWIR LED ﶵ
	31.#14151 Stream1 & 2վResolutionɡAFrame Rate|ܦ1
	32.#14152 220V 60Hz, Stream2 change to 640x480 cause stream 1(1280x1020) eܦ
	33.#13571 Host name J̤j then save & reboot --> Can't find the IP camera's IP address
	34.#13385 3 frames of motion disappeared after changing frame rate
	35.#14213 OSGbSave Reboot,|QM
	36.IEEE 802.1x setting issue:CA certificate, User  certificate /private key TYupload䤤@,YLkapply\,åBXĵ
	37.ϥHTTPSsu, LIVEesnapshotSӤ(HTTP`).
	38.#14086 Resolution1920x10802048x1536, Motion Regionm|]
	39.#14066 Web UI Live VieweAYIEeɡATunePC speaker/head sets volumeվ㲧`
	40.#14081 ϥOSD\A]w@OSD Region(1~4)APositionTopAFormat of Texts]w%YYYY%MM%DD%hh%mm%ss%YYYY%W%MM%H%DD%C%hh%X%mm%ssA]wĤ@iLive VieweɡA쥻Live ViewŦɶb|At~IFull ScreenAESC^Live VieweAŦɶb|\OSDT

[Limitation]
	1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
	2. As sensor is OV9715, stream-1 resolution from 1280x720 change to VGA that the view angle will be different.
	3. On the platform A1, the H.264 encoding out of the video stream is high profile cause can't be played in the QuickTime.
	4. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and 
	   cause the network to some errors occurred. This case only occurs the the D/N models.
########################################################################
########################################################################
A1D-500-V6.01.02
2012/09/14

SVN Revision: 10357
Bootloader: BOOTLOADER-500-V01.04
A1 SDK: 2.00.06
dev_cap version: V1.0.26
ISP module version: 1.00.26 and A1_ISP: 1.00.16
ECM version: v1.0.0.13
Web UI:  1.00.07
LibHttp: V1.00.33
OpenSSL V1.00.06
LibRtsp V1.00.13
Wan Daemon V1.00.11
Wan Daemon_api V1.00.07
DateTime Daemon V1.00.05

[New Feature]
*********************************************************************************
** Supported Camera List
*********************************************************************************
[ Video Quality Ready ]
   -- OV9715 --
   D11, E52, E51, D51, E31, D31, E11, E21, E41,
   -- OV5653 --
   E32, E33, E53, E54, E12, E13, D52, E42, E43.
   -- AR0331 --
   None,
[ Driver Function Ready ONLY !!!! ]
   -- OV9715 --
   D11, E21, E11, E31, E52, E71, E51, D51, D31, E55, E61, E81, E41,
   -- OV5653 --
	D32, D12, D52, E12, E13, E32, E33, E53, E54, E56, E72, E73, E42, E43,  
	E62, E63, E82, E83, E22,
   -- AR0331 --
   E64,
   -- IMX-122 --
   E84,
*********************************************************************************
	1. add libstdc++.so* lib in order to support iperf. 
	2. In order to solve the few devices need to restart several times to boot issue, 
	   will be based the device capability to decide which modules need to be inserted.
	3. V2_WAN_STATUS will display the IPv6 address.
	4. Support the "AR0331" sensor.
    5. Support OSD and Privacy Mask function
	6. Support 802.1x, IP filtering and SNMP serive.
	7. VGA aspect ratio is ready.
	8. Event related functions has been implemented.
	
[Bug Fixed]
	1. #13173 Motion sensitivity 70% --> Motion trigger
	2. #13384 UI@קLine Frequency50 HZExposure ModeManual, ShutterѼƷ|SQgJ
	3. #13385 3 frames of motion disappeared after changing frame rate
	4. #13293 RTSP authentication item can't change to disable
	5. kernel softirq exception.
	6. Net driver workaround  the PHY layer error during the frame reception and report on MII
	7. Can't upload the 802.1x related certificate files from the Web-UI.
    8. Generate a self-signed certificate for https, the "Common Name" of the item should check how to use the asterisk(*) character and pop-up warning message.  

[Limitation]
	1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
	2. As sensor is OV9715, stream-1 resolution from 1280x720 change to VGA that the view angle will be different.
	3. On the platform A1, the H.264 encoding out of the video stream is high profile cause can't be played in the QuickTime.
	4. When the IR-LED is turned on and keep for some time, the temperature of the device will be too high and 
	   cause the network to some errors occurred. This case only occurs the the D/N models.
########################################################################
########################################################################
A1D-500-V6.01.01
2012/09/04

SVN Revision: 10222
Bootloader: BOOTLOADER-500-V01.04
A1 SDK: 2.00.04
dev_cap version: V1.0.25
ISP module version: 1.00.22 and A1_ISP: 1.00.14
ECM version: v1.0.0.11
Web UI:  1.00.05
LibHttp: V1.00.29
OpenSSL V1.00.06
LibRtsp V1.00.13
Wan Daemon V1.00.07
Wan Daemon_api V1.00.04
DateTime Daemon V1.00.05

[New Feature]
	1. add libstdc++.so* lib in order to support iperf. 
	2. In order to solve the few devices need to restart several times to boot issue, 
	   will be based the device capability to decide which modules need to be inserted.
	
[Bug Fixed]
	1. kernel softirq exception.

[Limitation]
	1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
	2. As sensor is OV9715, stream-1 resolution from 1280x720 change to VGA that the view angle will be different.
	3. On the platform A1, the H.264 encoding out of the video stream is high profile cause can't be played in the QuickTime.
########################################################################
########################################################################
A1D-500-V6.01.00
2012/08/28
This is SBA's firmware base on A1D-500-V6.00.08.

SVN Revision: 10129
Bootloader: BOOTLOADER-500-V01.04
A1 SDK: 2.00.03
dev_cap version: V1.0.24
ISP module version: 1.00.22 and A1_ISP: 1.00.14
ECM version: v1.0.0.11
Web UI:  1.00.05
LibHttp: V1.00.29
OpenSSL V1.00.06
LibRtsp V1.00.13
Wan Daemon V1.00.07
Wan Daemon_api V1.00.04
DateTime Daemon V1.00.05

[New Feature]
	It is not for E32/E33/E53/E54 ES (the video quality is not yet approved)
	******************************************************************************
	** Supported Camera List
	******************************************************************************
	[ Video Quality Ready ]
	-- OV9715 --
	D11, E52, E51, D51, E31, D31
	-- OV5653 --
	None,
	-- AR0331 --
	None,
	[ Driver Function Ready ONLY !!!! ]
	-- OV9715 --
	D11, E21, E11, E31, E52, E71, E51, D51, D31, E55, E61, E81, E41,
	-- OV5653 --
	D32, D12, D52, E12, E13, E32, E33, E53, E54, E56, E72, E73, E42, E43,
	E62, E63, E82, E83, E22,
	-- AR0331 --
	E64,
	-- IMX-122 --
	E84,
	******************************************************************************
	1. Support the "AR0331" sensor.
    2. Add OSG feature.
	
[Modified]
	1. Add the 8 dummy line when setting the input source resolution of the ISP will be canceled for the every resolution configuration.
	
[Bug Fixed]
	1. #13173 Motion sensitivity 70% --> Motion trigger
	2. #13384 UI@קLine Frequency50 HZExposure ModeManual, ShutterѼƷ|SQgJ
	3. #13385 3 frames of motion disappeared after changing frame rate
	4. #13293 RTSP authentication item can't change to disable

[Limitation]
	1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
	2. As sensor is OV9715, stream-1 resolution from 1280x720 change to VGA that the view angle will be different.
	3. On the platform A1, the H.264 encoding out of the video stream is high profile cause can't be played in the QuickTime.
########################################################################
########################################################################
A1D-500-V6.00.08
2012/08/06
SVN Revision: 
Bootloader: BOOTLOADER-500-V01.04
A1 SDK: 2.00.01
dev_cap version: V1.0.21
ISP module version: 1.00.21 and A1_ISP: 1.00.13
ECM version: v1.0.0.9
Web UI:  1.00.04
LibHttp: V1.00.29
OpenSSL V1.00.06
LibRtsp V1.00.11
Wan Daemon V1.00.07
Wan Daemon_api V1.00.04
DateTime Daemon V1.00.05

[New Feature]
******************************************************************************
** Supported Camera List
******************************************************************************
[ Video Quality Ready ]
-- OV9715 --
D11, E52, E51, D51, E31, D31
-- OV5653 --
None,
-- AR0331 --
None,
[ Driver Function Ready ONLY !!!! ]
-- OV9715 --
D11, E21, E11, E31, E52, E71, E51, D51, D31, E55, E61, E81, E41,
-- OV5653 --
D32, D12, D52, E12, E13, E32, E33, E53, E54, E56, E72, E73, E42, E43,
E62, E63, E82, E83, E22,
-- AR0331 --
E64,

[Bug Fixed]
1.	#13169 Factory default .NTrigger interval ]300 sec =>إu|d@
2.  #13170 From MJPEG change to H.264 then Enable Motion 1,2 & 3@ɭPMotion 2 m_I~
3.  #13168 gJMotion region 1sensitivity 0ɭPhighlight ܦregion 2
4.  #13177 Fail to save the settings for Search Server Port1~2
5.  #13179 Per A1 Spec., "IGMP" is not supported. However, it is shown in Web UI and can NOT set to 'Disabled'.
6.  #13180 Per Spec., the language index for "Hungarian" should be '11' instead of '22'.
7.  #13183 Can't input 67 characters in Host Name
8.  #13184 Set maximum characters in Camera Name will make device crash
9.  #13178 Fail to save the settings for RTP Multicast Video/Audio Port for Media1/2
10. #12605 Can't connect AdapterTester v1.2.44.17 to play video by RTP over UDP connection
11. #12599 Power on off}^Ϥ, ɷ|A
12. #12594 Factory Default  "Preserve network setting and HTTP/HTTPS port. " ,  videoe|A
13. #12590 LkϥArchiverPlayerA1(h.264)sRAW
14. #13193 URL VIDEO_WB_MODE=HOLD , URL^ȿ~
15. #13192 White Balance]HOLD,Save&Reboot,  White BalanceLkTw,åBWhite Balance UI|^Auto mode
16. #13188 DDNSon fly change
17. #12592 E31/D11 /  D51 UI椤Audioﶵ
18. #13205 Only check region 3 then trigger region 3--> Activity bar SiΥX{
19. #13194 50HZ Slowest Auto Shutter Speed 1/5P1/13, e{ݼvPeG׬ۦP
20. #13185 Execute URL of resolution can't stop SDK playing video
21. #13195 Bonjour Naming RuleܰT@P
22. #13190 Digital Noise Reduction󴫬ON/OF,|ı
23. #12604 Language of UI doesn't match Control Sheet
24. #13186 There are some characters in user password can be set but can't login
25. #13314 Can't snapshot picture of stream 2
26. #13306 RTP,H264,FPS=1 NVR2. 3 get e

[Limitation]
1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
2. As sensor is OV9715, stream-1 resolution from 1280x720 change to VGA that the view angle will be different.
3. On the platform A1, the H.264 encoding out of the video stream is high profile cause can't be played in the QuickTime.

########################################################################
########################################################################
A1D-500-V6.00.07
2012/07/25
SVN Revision: 
Bootloader: BOOTLOADER-500-V01.04
A1 SDK: 1.00.10
dev_cap version: V1.0.19
ISP module version: 1.00.20 and A1_ISP: 1.00.12
ECM version: v1.0.0.8
Web UI:  1.00.03
LibHttp: V1.00.29
OpenSSL V1.00.06
LibRtsp V1.00.09
Wan Daemon V1.00.06
Wan Daemon_api V1.00.03
DateTime Daemon V1.00.05

[New Feature]
1. Add the bitrate adjustment mechanism based on the current shutter speed and frame rate dependency.
2. Notice motion alert by Control Message is ready.
3. Support OEM url command.
4. Use new ECM : nvA1Media
5. ISP module support Camera list as blow,
	-- OV9715 --
		D11, E21, E11, E31, E52, E71, E51, D51, D31, E55, E61, E81, E41
	-- OV5653 --
		D32, D12, D52, E12, E13, E32, E33, E53, E54, E56, E72, E73, E42, E43, E62, E63, E82, E83, E22
		Please note that D32 firmware device capabilities are not support.
6. Update Linux configuration file to enable the PPP related function.

[Bug Fixed]
1.	#12568 Frame reate setup to "1"   cause live preview `
2.  #12589 su,  DI ONOEnable
3.  #12592 E31/D11 /  D51 UI椤Audioﶵ
4.  #12595 ToSLkdisable & ToS Priority UIܤT
5.  #12596 A1 model nameԭz~
6.  #12597 Bonjour Lkdisable & Friendly NameLkק
7.  #12598 Bonjour  Friendly NameLkϥ "-"  Ÿ,  PSPEC
8.  #12600 There should not be 802.1X in Web UI
9.  #12602 MD_CAP and MD_SRC_CURRENT don't show on System Information
10. #12609 URL CDR_IPERF_CLIENT (system cgi) pUDP, URLa " speed in Mbits/sec" Ѽ,  iperfLk
11. #12657 URL command of Video Max Bitrate doesn't work
12. #12608 PPPoE connection fail
13. #12593 E31bϥIE Preview,1, |۰ʦ^logine
14. #12601 Can't set DDNS and enable it
15. #12604 Language of UI doesn't match Control Sheet
16. #12654 Changing Video Bit Rate Mode and GOP 1 I-frame makes the video wrong
17. #12603 Quality (Low, Middle & High)  yqܤƨS
18. #12607 Adjusting Quality of Stream 2 in MJPEG mode makes DUT-A crash when executing VLC to play video
19. #12660 FPS Number List doesn't match A1 Firmware Design Spec
20. UPnP defualt ModelName use the first three characters of the Productioon ID.
21. Change driver's isr to poll mode to resolve changing resolution caused by system panic.
22. Revise the Bootloader naming rule for checking.
23. When motion sensitivity is set to 0, will continue to be triggered.
24. վBrightnessMContrasteSܤ.
25. Date&Time]wSNTP/NTP ServerAoثeɶCSave&RebootAɶS^Manually]wȡC

[Limitation]
1. The video can see the half width green line at the bottom window when video resolution is 5M(2592x1944).
2. As sensor is OV9715, stream-1 resolution from 1280x720 change to VGA that the view angle will be different.

########################################################################
########################################################################
A1D-500-V6.00.06
2012/07/24
SVN Revision: 9779
Bootloader: BOOTLOADER-500-V01.04
A1 SDK: 1.00.10
dev_cap version: V1.0.19
ISP module version: 1.00.19 and A1_ISP: 1.00.11
ECM version: v1.0.0.5
Web UI:  1.00.02
LibHttp: V1.00.29
OpenSSL V1.00.06
LibRtsp V1.00.09
Wan Daemon V1.00.06
Wan Daemon_api V1.00.03
DateTime Daemon V1.00.05

[New Feature]
1. Add the bitrate adjustment mechanism based on the current shutter speed and frame rate dependency.
2. Notice motion alert by Control Message is ready.
3. support OEM url command.
4. Use new ECM : nvA1Media
5. ISP module support Camera list as blow,
	-- OV9715 --
		D11, E21, E11, E31, E52, E71, E51, D51, D31, E55, E61, E81, E41
	-- OV5653 --
		D32, D12, D52, E12, E13, E32, E33, E53, E54, E56, E72, E73, E42, E43, E62, E63, E82, E83, E22
		Please note that D32 firmware device capabilities are not support.
6. Update Linux configuration file to enable the PPP related function.

[Bug Fixed]
1.	#12568 Frame reate setup to "1"   cause live preview `
2.  #12589 su,  DI ONOEnable
3.  #12592 E31/D11 /  D51 UI椤Audioﶵ
4.  #12595 ToSLkdisable & ToS Priority UIܤT
5.  #12596 A1 model nameԭz~
6.  #12597 Bonjour Lkdisable & Friendly NameLkק
7.  #12598 Bonjour  Friendly NameLkϥ "-"  Ÿ,  PSPEC
8.  #12600 There should not be 802.1X in Web UI
9.  #12602 MD_CAP and MD_SRC_CURRENT don't show on System Information
10. #12609 URL CDR_IPERF_CLIENT (system cgi) pUDP, URLa " speed in Mbits/sec" Ѽ,  iperfLk
11. #12657 URL command of Video Max Bitrate doesn't work
12. #12608 PPPoE connection fail
13. #12593 E31bϥIE Preview,1, |۰ʦ^logine
14. #12601 Can't set DDNS and enable it
15. #12604 Language of UI doesn't match Control Sheet
16. #12654 Changing Video Bit Rate Mode and GOP 1 I-frame makes the video wrong
17. #12603 Quality (Low, Middle & High)  yqܤƨS
18. #12607 Adjusting Quality of Stream 2 in MJPEG mode makes DUT-A crash when executing VLC to play video
19. #12660 FPS Number List doesn't match A1 Firmware Design Spec
20. UPnP defualt ModelName use the first three characters of the Productioon ID.
21. Change driver's isr to poll mode to resolve changing resolution caused by system panic.
22. Revise the Bootloader naming rule for checking.
23. When motion sensitivity is set to 0, will continue to be triggered.

########################################################################
########################################################################
A1D-500-V6.00.05
2012/07/23
SVN Revision: 
Bootloader: BOOTLOADER-500-V01.04
A1 SDK: 1.00.10
dev_cap version: V1.0.19
ISP module version: 1.00.18
A1_ISP: 1.00.11
ECM version: v1.0.0.5
Web UI:  1.00.02
LibHttp: V1.00.29
OpenSSL V1.00.06
LibRtsp V1.00.09
Wan Daemon V1.00.06
Wan Daemon_api V1.00.03
DateTime Daemon V1.00.05

[New Feature]
1. Add the bitrate adjustment mechanism based on the current shutter speed and frame rate dependency.
2. Notice motion alert by Control Message is ready.
3. support OEM url command.
4. Use new ECM : nvA1Media
5. ISP module support Camera list as blow,
	-- OV9715 --
		D11, E21, E11, E31, E52, E71, E51, D51, D31, E55, E61, E81, E41
	-- OV5653 --
		D32, D12, D52, E12, E13, E32, E33, E53, E54, E56, E72, E73, E42, E43, E62, E63, E82, E83, E22
		Please note that D32 firmware device capabilities are not support.
6. Update Linux configuration file to enable the PPP related function.

[Bug Fixed]
1.	#12568 Frame reate setup to "1"   cause live preview `
2.  #12589 su,  DI ONOEnable
3.  #12592 E31/D11 /  D51 UI椤Audioﶵ
4.  #12595 ToSLkdisable & ToS Priority UIܤT
5.  #12596 A1 model nameԭz~
6.  #12597 Bonjour Lkdisable & Friendly NameLkק
7.  #12598 Bonjour  Friendly NameLkϥ "-"  Ÿ,  PSPEC
8.  #12600 There should not be 802.1X in Web UI
9.  #12602 MD_CAP and MD_SRC_CURRENT don't show on System Information
10. #12609 URL CDR_IPERF_CLIENT (system cgi) pUDP, URLa " speed in Mbits/sec" Ѽ,  iperfLk
11. #12657 URL command of Video Max Bitrate doesn't work
12. #12608 PPPoE connection fail
13. #12593 E31bϥIE Preview,1, |۰ʦ^logine
14. #12601 Can't set DDNS and enable it
15. #12604 Language of UI doesn't match Control Sheet
16. #12654 Changing Video Bit Rate Mode and GOP 1 I-frame makes the video wrong
17. #12603 Quality (Low, Middle & High)  yqܤƨS
18. #12607 Adjusting Quality of Stream 2 in MJPEG mode makes DUT-A crash when executing VLC to play video
19. #12660 FPS Number List doesn't match A1 Firmware Design Spec
20. UPnP defualt ModelName use the first three characters of the Productioon ID.
21. Change driver's isr to poll mode to resolve changing resolution caused by system panic.
22. Revise the Bootloader naming rule for checking.

[Modified]


########################################################################
########################################################################
A1D-500-V6.00.04
2012/06/15

[New Feature]
1. Until now support models capability: D11, D31, D51, E11, E12, E13, E21, E22, E31, E41, E42, E43, E51, E52, E53, E54, E55, E56, E61, E62, E63, E64, E65, E71, E72, E73, E81, E82, E83.  
   The sensor in E64, E65 is AR0331, must wait for ISP driver support for this sensor, the two models to work.
2. Add protection mechanisms to access the flash.
3. Motion alert results in the B2 header is ready. 

[Modified]
1. Change Uart baud rate from 57600 to 115200
2. Add handing Character Timeout code in Uart interrupt handler to fix Can not boot successfully without Uart cable connected issue and remove previous useless SW work around for this issue.
3. Fix the issue of the Audio-In sensitivity no effect.
4. Temporarily not support Ipfilter, default firewall rules and SNMP functions.
5. Update A1-BSP version to 1.00.10
6. Update ISP module version to v1.00.15
7. ECM update to V3.1.0.7


########################################################################
########################################################################
A1D-500-V6.00.03
2012/05/30

[New Feature]
  1. Update ISP module v1.00.14 for IR-Cut, IR-LED control.
  2. Back off safe cpu clock rate for OV5653 model. Therefore, please update V6.00.03 is complete, remeber to change the Serial-ID by macdev cgi once again.

########################################################################
########################################################################
A1D-500-V6.00.02
2012/05/25
ISP module version: v1.00.13

[New Feature]
  1. Update A1-BSP version to 1.00.09
  2. Support Day/Night auto detect if has Day/Night feature model.
  3. Remind: When update V6.00.02 is complete, remeber to change the Serial-ID by macdev cgi once again.

########################################################################
########################################################################
A1D-500-V6.00.01
2012/05/11
ISP module version: v1.00.10

[New Feature]
  1. Update A1-BSP version to 1.00.06
  2. Reset Button and Power-Led is available.
  3. Support "iperf" command.
  4. Support IPV6.
  5. Before the firmware is V6.99.01, please update V6.00.01, remeber to change the serial id by macdev cgi.

########################################################################
########################################################################
A1D-500-V6.99.01
2012/04/18
ISP module version: v1.00.08

[New Feature]
  1. Update A1-BSP version to 1.00.05
  2. fix bug of the mirror and flip configuration can't be saved.

########################################################################
########################################################################
A1D-500-V6.99.00
2012/04/16
ISP module version: v1.00.08

[New Feature]
  1. Upgrade firmware procedure:
	1.1 After the release firmware of this version will be unable to be downloaded by TFTP. 
		You can upload a new firmware by setup web page: System -> Firmware Upload.
	1.2 If you can't upload by setup page, please perform:
		http://IP/cgi-bin/update?USER=admin&PWD=123456&FIRMWARE
  2. support cgi: system, encoder, macdev, update, 80503736
  3. D41 is the default model will be set in this version.
  
