IGS-2108P Hilbert 8-Port Industrial Gigabit PoE Smart Lite Switch, 802.3af/at PoE, 8 PoE Outputs, 112W Power Budget, DIN-Rail, -40°C to 75°C

Model Number.
IGS-2108P
SKU
55054207101
  • All-PoE Industrial Design: 8 Gigabit Ethernet RJ45 ports with full 802.3af/at PoE+ support for IP cameras, APs, VoIP and IIoT devices
  • PoE Power Budget: Total 112W PoE budget with PoE Watchdog to automatically reboot unresponsive powered devices
  • Extended Reach: Supports up to 250M PoE transmission distance in 10Mbps mode for long-range industrial deployments
  • Harsh Environment Ready: -40°C to 75°C operating temperature, IP30 metal housing, DIN-rail mounting and redundant power inputs
  • Industrial-Grade Protection: 4KV surge protection plus 6KV contact / 8KV air ESD protection for stable operation in noisy electrical environments
  • Optimized Traffic Control: 802.1Q VLAN, IGMP Snooping, STP/RSTP and storm control to improve multicast video and prevent network loops
  • Performance Features: Gigabit wire-speed switching, 4K MAC address table and 9K jumbo frames for higher throughput
  • Quality of Service: IEEE 802.1p QoS with 4 priority queues to prioritize critical voice, video and control traffic
  • Energy Efficient: IEEE 802.3az Energy Efficient Ethernet reduces power consumption during low-traffic periods
  • Smart Lite Management: Web-based interface and LevelOne IP Locator utility for easy device discovery, configuration and monitoring
  • The LevelOne IGS-2108P Hilbert is an 8-port Industrial Gigabit PoE Smart Lite switch designed for mission-critical networks in factories, transportation systems, outdoor cabinets and surveillance environments. All eight RJ45 ports support Gigabit Ethernet and PoE+, allowing you to power IP cameras, wireless access points, VoIP phones and industrial IoT devices over a single Ethernet cable.

    Compliant with IEEE 802.3af/at, the switch delivers a total PoE budget of 112W and supports PoE Watchdog for automatic recovery of frozen powered devices. Extended PoE mode enables data and power transmission up to 250 meters in 10Mbps mode, ideal for large sites such as warehouses, parking areas and perimeter security installations where standard 100-meter cabling is not enough.

    Built for harsh conditions, the IGS-2108P operates in a wide temperature range from -40°C to 75°C and is housed in a robust IP30 metal enclosure with DIN-rail mounting and redundant power inputs. 4KV surge protection and 6KV contact / 8KV air ESD protection help ensure continuous operation in electrically noisy industrial environments.

    For advanced traffic control, the switch supports 802.1Q VLAN segmentation, IEEE 802.1p QoS with four priority queues, IGMP Snooping for optimized multicast video, STP/RSTP loop prevention, storm control and 9K jumbo frames for higher throughput. With Smart Lite web management and the LevelOne IP Locator utility, administrators can easily discover, configure and monitor devices, simplifying deployment and reducing total cost of ownership for industrial PoE networks.

    More Information
    Logistics Data.
    Harmonized System (HS) code. 851762
    Customs product code (TARIC). 8517620000
    Power.
    Power Redundancy. Dual Power Input
    Features 1.
    Features. L2 Switching Features
    1. IGMP Snooping
    ● Supports IGMP Snooping
    ● Supports 128 groups
    2. Link Aggregation
    ● Supports static link aggregation
    ● Supports 8 groups of aggregation, up to 4 ports per group
    3. Port Mirroring
    ● One-to-one
    ● Many-to-Many
    4. Support port isolation, port grouping

    VLAN
    ● Supports up to 32 VLANs (out of 4K VLAN IDs)
    ● Supports Port VLAN and 802.1Q VLAN
    ● Supports Port-based/802.1p/DSCP priority

    QoS
    ● Support 4 priority queues
    ● Port Speed Limit
    ● Storm Control
    Management. ● Web-based Graphic User Interface (GUI)
    ● Supports LevelOne IP Locator for easier IP management.
    Miscellaneous.
    Grade. Industrial
    PoE Supported. Yes
    Manageable. Yes
    Fanless. Yes
    Series. HILBERT series
    PoE Power Budget. Total 112.00
    Performance 2.
    Switching capacity. 16 Gbps
    System Specifications.
    Power supply. VDC 44~57V
    Data Rate. 1Gbps
    Power supply included. No
    Power input. Redundant Dual DC 12V/24V/48V
    Power consumption. 120 W
    MTBF. 43,800 hrs
    Heat dissipation. 40.94 (Btu/H)
    Packet forwarding rate. 11.904 Mpps
    Port Configuration. 8x 10/100/1000 Ethernet PoE+ ports
    IP grade. IP30
    Standard. ● IEEE 802.3 10-BASE-T (Ethernet)
    ● IEEE 802.3u 100-BASE-TX (Fast Ethernet)
    ● IEEE 802.3ab 1000BASE-T (Gigabit Ethernet)
    ● IEEE 802.3x Flow Control (full-duplex flow control)
    ● IEEE 802.3af Power over Ethernet
    ● IEEE 802.3at Power over Ethernet Plus
    ● IEEE 802.3az: Energy Efficient Ethernet
    ● IEEE 802.1D Spanning Tree Protocol (STP)
    ● IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
    Acoustic noise (dB). 0 dB (A)
    Pin assignment and polarity. 1/2 (+), 3/6 (-)
    Mount. DIN rail mount
    Flash memory size. 2 MB
    MAC address table. 4 K
    Jumbo frame (KB). 9 KB
    Indicators. Power, Link/Act
    Dip switch. LOOP, VLAN ON/OFF
    Packet buffer. 1.5 Mbits
    Backplane (Gbps). 16
    Others.
    Approval and Compliance. ● CE
    ● UKCA
    ● FCC Part 15, Subpart B Class B
    ● RoHS
    Operating humidity. 10% RH ~ 90% RH
    Operating temperature. -40°C ~ 75°C
    Storage humidity. 5% RH ~ 95% RH
    Storage temperature. -40°C ~ 85°C
    Package Contents. ● IGS-2108P
    ● Power Terminal Block
    ● Din-rail Mount Kit
    ● Quick Installation Guide
    ● Declaration of Conformity
    General.
    Color. Black
    EAN. 4015867236192
    Model Number. IGS-2108P
    Physical Specifications.
    Product weight (kg). 0.49 kg
    Dimensions (W x D x H). 153 x 114 x 38 mm
    Download PDF Download PDF
    Scroll to top